Kawaii bear silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin / epoxy resin jewelry, cabochon making, etc.

★ Measurement: approx. 3.5cm (W) x 4.3cm (L) / 1.38" (W) x 1.69" (L)

★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.

★ Tips on clay: If the clay you use is very soft / sticky, the clay may not be pop out easily, in this case, you can put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop it out.