Molds - Animals & Insects
★Measurement: Approx. 1.3cm (W) x 1.6cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530246529,"title":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446","handle":"bear-with-heart-16mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-epoxy-resin-soap-wax-gumpaste-fondant-md446","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:12-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","beads mold","bear mold","cabochon mold","deco mold","decoden mold","embellishment","jewelry mold","kawaii mold","Paper","polymer clay mold","premo mold","Scrapbooking","sculpey mold","Supplies","topper mold"],"price":475,"price_min":475,"price_max":475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943565953,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD446","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446","public_title":null,"options":["Default Title"],"price":475,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306745.jpeg?v=1517626305","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306746.jpeg?v=1517626305","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306747.jpeg?v=1517626305","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306748.jpeg?v=1517626305"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306745.jpeg?v=1517626305","options":["Title"],"media":[{"alt":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446 - MiniatureSweet","id":107502207025,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306745.jpeg?v=1517626305"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306745.jpeg?v=1517626305","width":600},{"alt":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446 - MiniatureSweet","id":107502239793,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306746.jpeg?v=1517626305"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306746.jpeg?v=1517626305","width":600},{"alt":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446 - MiniatureSweet","id":107502272561,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306747.jpeg?v=1517626305"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306747.jpeg?v=1517626305","width":600},{"alt":"Bear with Heart (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Epoxy, Resin, Soap, Wax, GumPaste, Fondant) MD446 - MiniatureSweet","id":107502305329,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306748.jpeg?v=1517626305"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189306748.jpeg?v=1517626305","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Mold Push Mold Miniature Cookie Mold ★Measurement: Approx. 1.5cm (W)...
Sold Out
{"id":5530246913,"title":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449","handle":"bear-mold-15mm-flexible-silicone-mold-animal-jewelry-earrings-mold-fimo-polymer-clay-mold-scrapbooking-push-mold-miniature-cookie-mold-md449","description":"\u003cp\u003eBear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Mold Push Mold Miniature Cookie Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:18-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal cabochon mold","animal mold","decoden supplies","doll deco mold","dollhouse deco mold","earring mold","embellishment","fimo mold","flexible mold","jewelry mold","kawaii bear mold","Paper","Scrapbooking","scrapbooking mold","silicone mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943567361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD449","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449","public_title":null,"options":["Default Title"],"price":425,"weight":9,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124404.jpeg?v=1517626211","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148313.jpeg?v=1517626211","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124274.jpeg?v=1517626211","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148203.jpeg?v=1517626211"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124404.jpeg?v=1517626211","options":["Title"],"media":[{"alt":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449 - MiniatureSweet","id":107502534705,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124404.jpeg?v=1517626211"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124404.jpeg?v=1517626211","width":600},{"alt":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449 - MiniatureSweet","id":107502567473,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148313.jpeg?v=1517626211"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148313.jpeg?v=1517626211","width":600},{"alt":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449 - MiniatureSweet","id":107502600241,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124274.jpeg?v=1517626211"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244124274.jpeg?v=1517626211","width":600},{"alt":"Bear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Push Mold Miniature Cookie Mold MD449 - MiniatureSweet","id":107502633009,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148203.jpeg?v=1517626211"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244148203.jpeg?v=1517626211","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBear Mold 15mm Flexible Silicone Mold Animal Jewelry Earrings Mold Fimo Polymer Clay Mold Scrapbooking Mold Push Mold Miniature Cookie Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.8cm (W) x 1.4cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530246401,"title":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445","handle":"bear-head-18mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-epoxy-casting-resin-wax-gum-paste-fondant-md445","description":"\u003cp\u003e★Measurement: Approx. 1.8cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:10-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","baby shower mold","beads mold","bear mold","cabochon mold","cell phone deco mold","cute kawaii mold","decoden mold","decoration mold","kawaii mold","Paper","polymer clay mold","Scrapbooking","sculpey mold","Supplies","topper mold"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943565761,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD445","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445","public_title":null,"options":["Default Title"],"price":475,"weight":10,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768491.jpeg?v=1517626198","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768492.jpeg?v=1517626198","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768493.jpeg?v=1517626198","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768494.jpeg?v=1517626198"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768491.jpeg?v=1517626198","options":["Title"],"media":[{"alt":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445 - MiniatureSweet","id":107502075953,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768491.jpeg?v=1517626198"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768491.jpeg?v=1517626198","width":600},{"alt":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445 - MiniatureSweet","id":107502108721,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768492.jpeg?v=1517626198"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768492.jpeg?v=1517626198","width":600},{"alt":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445 - MiniatureSweet","id":107502141489,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768493.jpeg?v=1517626198"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768493.jpeg?v=1517626198","width":600},{"alt":"Bear Head (18mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Epoxy Casting Resin Wax Gum Paste Fondant) MD445 - MiniatureSweet","id":107502174257,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768494.jpeg?v=1517626198"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185768494.jpeg?v=1517626198","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.8cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530248257,"title":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458","handle":"lady-bug-17mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-sculpey-casting-resin-epoxy-fondant-gum-paste-md458","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:37-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["animal mold","cabochon mold","cute mold","deco mold","decoden mold","decoration mold","embellishment","kawaii deco mold","kawaii mold","Paper","paper clay mold","plaster mold","polymer clay mold","Scrapbooking","Supplies","topper mold"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943572033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD458","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458","public_title":null,"options":["Default Title"],"price":475,"weight":10,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","options":["Title"],"media":[{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503714353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503747121,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503779889,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503812657,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 2.4cm (W) x 2.3cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$5.45 USD
{"id":5530247553,"title":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453","handle":"bear-in-sweater-24mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-epoxy-fondant-gum-paste-md453","description":"\u003cp\u003e★Measurement: Approx. 2.4cm (W) x 2.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:27-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bear mold","cabochon mold","deco mold","decoden mold","decoration mold","doll mold","embellishment mold","kawaii mold","Paper","pet mold","polymer clay mold","Scrapbooking","sculpey mold","soap mold","Supplies"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943569729,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD453","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453","public_title":null,"options":["Default Title"],"price":545,"weight":14,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591974.jpeg?v=1517626189","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591978.jpeg?v=1517626189","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591732.jpeg?v=1517626189","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591734.jpeg?v=1517626189"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591974.jpeg?v=1517626189","options":["Title"],"media":[{"alt":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453 - MiniatureSweet","id":107503058993,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591974.jpeg?v=1517626189"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591974.jpeg?v=1517626189","width":600},{"alt":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453 - MiniatureSweet","id":107503091761,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591978.jpeg?v=1517626189"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591978.jpeg?v=1517626189","width":600},{"alt":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453 - MiniatureSweet","id":107503124529,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591732.jpeg?v=1517626189"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591732.jpeg?v=1517626189","width":600},{"alt":"Bear in Sweater (24mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Epoxy, Fondant, Gum Paste) MD453 - MiniatureSweet","id":107503157297,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591734.jpeg?v=1517626189"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238591734.jpeg?v=1517626189","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.4cm (W) x 2.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1cm (W) x 1.4cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530246785,"title":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448","handle":"bear-14mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-resins-casting-gum-paste-fondant-soap-md448","description":"\u003cp\u003e★Measurement: Approx. 1cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:15-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bear mold","cabochon mold","charms mold","cute mold","deco mold","decoration mold","embellishment mold","fimo mold","jewelry mold","kawaii mold","Paper","polymer clay mold","resin mold","Scrapbooking","Supplies"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943566913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD448","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448","public_title":null,"options":["Default Title"],"price":475,"weight":7,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362055.jpeg?v=1517626122","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362056.jpeg?v=1517626122","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362057_c18fbdd3-6b7b-44f8-ad43-c2d19a6aa764.jpeg?v=1517626122","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362058_c9ba2dfe-9a43-4264-82b0-72c6951d5c40.jpeg?v=1517626122"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362055.jpeg?v=1517626122","options":["Title"],"media":[{"alt":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448 - MiniatureSweet","id":107502403633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362055.jpeg?v=1517626122"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362055.jpeg?v=1517626122","width":600},{"alt":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448 - MiniatureSweet","id":107502436401,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362056.jpeg?v=1517626122"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362056.jpeg?v=1517626122","width":600},{"alt":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448 - MiniatureSweet","id":107502469169,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362057_c18fbdd3-6b7b-44f8-ad43-c2d19a6aa764.jpeg?v=1517626122"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362057_c18fbdd3-6b7b-44f8-ad43-c2d19a6aa764.jpeg?v=1517626122","width":600},{"alt":"Bear (14mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Resins Casting, Gum Paste, Fondant, Soap) MD448 - MiniatureSweet","id":107502501937,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362058_c9ba2dfe-9a43-4264-82b0-72c6951d5c40.jpeg?v=1517626122"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189362058_c9ba2dfe-9a43-4264-82b0-72c6951d5c40.jpeg?v=1517626122","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Teddy Bear Mold w/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Polymer Clay Animal Cabochon Resin Mold ★Measurement: Approx. 2cm...
$5.45 USD
{"id":5530247361,"title":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452","handle":"toy-bear-mold-w-bow-21mm-flexible-silicone-mold-kawaii-cupcake-topper-fondant-gumpaste-mold-fimo-clay-animal-cabochon-resin-mold-md452","description":"\u003cp\u003eTeddy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Polymer Clay Animal Cabochon Resin Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2cm (W) x 2.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:24-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal cabochon mold","animal mold","cupcake topper mold","deco mold","embellishment","fimo mold","flexible mold","fondant mold","gumpaste mold","Paper","polymer clay mold","resin mold","Scrapbooking","silicone mold","Supplies","toy bear mold"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943568769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD452","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452","public_title":null,"options":["Default Title"],"price":545,"weight":10,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768628.jpeg?v=1517654394","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768657.jpeg?v=1517654394","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768725.jpeg?v=1517654394","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768755.jpeg?v=1517654394"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768628.jpeg?v=1517654394","options":["Title"],"media":[{"alt":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452 - MiniatureSweet","id":107502927921,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768628.jpeg?v=1517654394"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768628.jpeg?v=1517654394","width":600},{"alt":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452 - MiniatureSweet","id":107502960689,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768657.jpeg?v=1517654394"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768657.jpeg?v=1517654394","width":600},{"alt":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452 - MiniatureSweet","id":107502993457,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768725.jpeg?v=1517654394"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768725.jpeg?v=1517654394","width":600},{"alt":"Toy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Clay Animal Cabochon Resin Mold MD452 - MiniatureSweet","id":107503026225,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768755.jpeg?v=1517654394"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191768755.jpeg?v=1517654394","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eTeddy Bear Mold w\/ Bow 21mm Flexible Silicone Mold Kawaii Cupcake Topper Fondant Gumpaste Mold Fimo Polymer Clay Animal Cabochon Resin Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2cm (W) x 2.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.3cm (W) x 1.7cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530246657,"title":"Dancing Lady Bear (17mm) Silicone Flexible Mold Push Mould Miniature Food Sweets Cupcake Jewelry Charms (Polymer Clay, Resin Candy) MD447","handle":"dancing-lady-bear-17mm-silicone-flexible-mold-push-mould-miniature-food-sweets-cupcake-jewelry-charms-polymer-clay-resin-candy-md447","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:14-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["bear mold","cabochon","charm","deco","decoden","decoration","doll","embellishment","jewelry","kawaii","Paper","polymer clay","Scrapbooking","Supplies"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943566401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD447","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dancing Lady Bear (17mm) Silicone Flexible Mold Push Mould Miniature Food Sweets Cupcake Jewelry Charms (Polymer Clay, Resin Candy) MD447","public_title":null,"options":["Default Title"],"price":475,"weight":9,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236673876.jpeg?v=1517630849","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236690319.jpeg?v=1517630849"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236673876.jpeg?v=1517630849","options":["Title"],"media":[{"alt":"Dancing Lady Bear (17mm) Silicone Flexible Mold Push Mould Miniature Food Sweets Cupcake Jewelry Charms (Polymer Clay, Resin Candy) MD447 - MiniatureSweet","id":107502338097,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236673876.jpeg?v=1517630849"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236673876.jpeg?v=1517630849","width":600},{"alt":"Dancing Lady Bear (17mm) Silicone Flexible Mold Push Mould Miniature Food Sweets Cupcake Jewelry Charms (Polymer Clay, Resin Candy) MD447 - MiniatureSweet","id":107502370865,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236690319.jpeg?v=1517630849"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236690319.jpeg?v=1517630849","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}