Products
Flower / Rose (20mm) Silicone Flexible Push Mold - M...
Sold Out
{"id":5530291329,"title":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690","handle":"flower-rose-20mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-epoxy-gum-paste-fondant-wax-md690","description":"\u003cp\u003e★Measurement: approx. 2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:59:00-11:00","created_at":"2016-03-26T01:59:10-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["cab mold","cabochon mold","cute flower mold","deco mold","decoden mold","embellishment mold","floral mold","flower mold","Handmade","jewelry mold","kawaii mold","Polymer Clay","polymer clay mold","ring mold","Supplies","wedding mold"],"price":575,"price_min":575,"price_max":575,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943738241,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD690","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690","public_title":null,"options":["Default Title"],"price":575,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283391.jpeg?v=1517634620","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283392.jpeg?v=1517634620","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283393.jpeg?v=1517634620","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283394.jpeg?v=1517634620"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283391.jpeg?v=1517634620","options":["Title"],"media":[{"alt":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690 - MiniatureSweet","id":107535138865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283391.jpeg?v=1517634620"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283391.jpeg?v=1517634620","width":600},{"alt":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690 - MiniatureSweet","id":107535171633,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283392.jpeg?v=1517634620"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283392.jpeg?v=1517634620","width":600},{"alt":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690 - MiniatureSweet","id":107535204401,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283393.jpeg?v=1517634620"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283393.jpeg?v=1517634620","width":600},{"alt":"Flower \/ Rose (20mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD690 - MiniatureSweet","id":107535237169,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283394.jpeg?v=1517634620"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196283394.jpeg?v=1517634620","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Flower / Rose (27mm) Silicone Flexible Push Mold - J...
Sold Out
{"id":5530268929,"title":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586","handle":"flower-rose-27mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-epoxy-casting-resins-wax-gum-paste-fondant-md586","description":"\u003cp\u003e★Measurement: Approx. 2.7cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:55:00-11:00","created_at":"2016-03-26T01:55:27-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["beads mold","cab mold","cabochon mold","deco mold","decoden mold","embellishment mold","floral mold","flower mold","Handmade","kawaii mold","Polymer Clay","polymer clay mold","sculpey mold","Supplies","topper mold","wedding mold"],"price":625,"price_min":625,"price_max":625,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943640641,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD586","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586","public_title":null,"options":["Default Title"],"price":625,"weight":16,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609552.jpeg?v=1517634715","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609553.jpeg?v=1517634715","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609554.jpeg?v=1517634715","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609555.jpeg?v=1517634715"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609552.jpeg?v=1517634715","options":["Title"],"media":[{"alt":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586 - MiniatureSweet","id":107520852017,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609552.jpeg?v=1517634715"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609552.jpeg?v=1517634715","width":600},{"alt":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586 - MiniatureSweet","id":107520884785,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609553.jpeg?v=1517634715"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609553.jpeg?v=1517634715","width":600},{"alt":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586 - MiniatureSweet","id":107520917553,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609554.jpeg?v=1517634715"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609554.jpeg?v=1517634715","width":600},{"alt":"Flower \/ Rose (27mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Epoxy Casting Resins Wax Gum Paste Fondant) MD586 - MiniatureSweet","id":107520950321,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609555.jpeg?v=1517634715"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609555.jpeg?v=1517634715","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.7cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Flower / Rose with Leaf (29mm) Silicone Flexible Pus...
Sold Out
{"id":5530307969,"title":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755","handle":"flower-rose-with-leaf-29mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-resin-epoxy-gum-paste-fondant-md755","description":"\u003cp\u003e★Measurement: approx. 2.9cm (W) x 2.8cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:01:00-11:00","created_at":"2016-03-26T02:01:33-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["beads mold","cabochon mold","deco mold","decoden mold","embellishment","floral mold","Handmade","kawaii mold","Polymer Clay","polymer clay mold","ring mold","sculpey mold","spring mold","Supplies","topper mold","wax mold"],"price":695,"price_min":695,"price_max":695,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943819329,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD755","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755","public_title":null,"options":["Default Title"],"price":695,"weight":24,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548114.jpeg?v=1517634751","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548115.jpeg?v=1517634751","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548116.jpeg?v=1517634751","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548117.jpeg?v=1517634751"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548114.jpeg?v=1517634751","options":["Title"],"media":[{"alt":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755 - MiniatureSweet","id":107544707121,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548114.jpeg?v=1517634751"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548114.jpeg?v=1517634751","width":600},{"alt":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755 - MiniatureSweet","id":107544739889,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548115.jpeg?v=1517634751"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548115.jpeg?v=1517634751","width":600},{"alt":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755 - MiniatureSweet","id":107544772657,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548116.jpeg?v=1517634751"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548116.jpeg?v=1517634751","width":600},{"alt":"Flower \/ Rose with Leaf (29mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Premo Resin Epoxy Gum Paste Fondant) MD755 - MiniatureSweet","id":107544805425,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548117.jpeg?v=1517634751"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190548117.jpeg?v=1517634751","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.9cm (W) x 2.8cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Flower Petal Silicone Mold (4 Cavity) | Floral Soft ...
$2.49 USD
{"id":542589747249,"title":"Flower Petal Silicone Mold (4 Cavity) | Floral Soft Mold | UV Resin Jewelry Making | Kawaii Craft Supplies","handle":"flower-petal-silicone-mold-4-cavity-floral-soft-mold-uv-resin-jewelry-making-kawaii-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful flower petal silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e3 petals: approx. 2.6cm (W) x 2.4cm (L) \/ 1.04\" (W) x 0.95\" (L)\u003c\/p\u003e\n\u003cp\u003e2 petals: approx. 2.9cm (W) x 1.6cm (L) \/ 1.14\" (W) x 0.61\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2018-03-13T02:16:23-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Mold Mix","tags":["cabochon mold","Clear Mold","Decoden Mold","epoxy resin","Flexible Mold","floral mold","flower mold","Kawaii Craft","nature","petal mold","resin art","resin crafts","resin mold","resin mould","Silicone Mold","soft mold","spring","UV Resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7282308710449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD370A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flower Petal Silicone Mold (4 Cavity) | Floral Soft Mold | UV Resin Jewelry Making | Kawaii Craft Supplies","public_title":null,"options":["Default Title"],"price":249,"weight":20,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD370A.jpg?v=1521024217"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD370A.jpg?v=1521024217","options":["Title"],"media":[{"alt":"Flower Petal Silicone Mold (4 Cavity) | Floral Soft Mold | UV Resin Jewelry Making | Kawaii Craft Supplies - MiniatureSweet","id":2520422056071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD370A.jpg?v=1521024217"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD370A.jpg?v=1521024217","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful flower petal silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e3 petals: approx. 2.6cm (W) x 2.4cm (L) \/ 1.04\" (W) x 0.95\" (L)\u003c\/p\u003e\n\u003cp\u003e2 petals: approx. 2.9cm (W) x 1.6cm (L) \/ 1.14\" (W) x 0.61\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Four Leaf Clover Silicone Mould | Epoxy Resin Flexib...
$1.99 USD
{"id":9248575617,"title":"Four Leaf Clover Silicone Mould | Epoxy Resin Flexible Mold | Large Floral Cabochon Mold (64mm)","handle":"four-leaf-clover-silicone-mould-epoxy-resin-flexible-mold-large-floral-cabochon-mold","description":"\u003cp\u003eFlexible 4 leaf clover silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.4cm or 2.52\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2017-04-21T00:01:57-11:00","created_at":"2017-04-22T03:06:30-11:00","vendor":"MiniatureSweet","type":"Leaf Mold","tags":["4 leaf clover","cabochon mold","clear mold","clover mold","decoden mold","epoxy resin","flexible mold","floral mold","flower mold","Four Leaf Clover","Kawaii Craft","leaf mold","resin art","resin crafts","resin mold","resin mould","silicone mold","soft mold","uv resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":33353305921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2036","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Four Leaf Clover Silicone Mould | Epoxy Resin Flexible Mold | Large Floral Cabochon Mold (64mm)","public_title":null,"options":["Default Title"],"price":199,"weight":18,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2036_NEW.jpg?v=1530606679"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2036_NEW.jpg?v=1530606679","options":["Title"],"media":[{"alt":"Four Leaf Clover Silicone Mould | Epoxy Resin Flexible Mold | Large Floral Cabochon Mold (64mm) - MiniatureSweet","id":2596159684743,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2036_NEW.jpg?v=1530606679"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2036_NEW.jpg?v=1530606679","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFlexible 4 leaf clover silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.4cm or 2.52\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}
French Bread Baguette Bun (16mm) Silicone Flexible P...
$4.75 USD
{"id":5530219521,"title":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217","handle":"french-bread-baguette-bun-16mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md217","description":"\u003cp\u003e★Measurement: Approx. 1.6cm (L) x 0.8cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:39:00-11:00","created_at":"2016-03-26T01:39:49-11:00","vendor":"MiniatureSweet","type":"Bread Mold","tags":["bakery mold","cabochon mold","deco mold","decoden mold","dollhouse deco mold","epoxy mold","fake food mold","Handmade","iphone deco mold","kawaii mold","kitsch jewelry mold","mini food mold","polymer clay mold","Scrapbooking","sculpey mold","Supplies"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943491265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD217","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217","public_title":null,"options":["Default Title"],"price":475,"weight":7,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241842.jpeg?v=1517635372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241876.jpeg?v=1517635372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273228531.jpeg?v=1517635372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242456.jpeg?v=1517635372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242000.jpeg?v=1517635372"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241842.jpeg?v=1517635372","options":["Title"],"media":[{"alt":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217 - MiniatureSweet","id":107467538481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241842.jpeg?v=1517635372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241842.jpeg?v=1517635372","width":600},{"alt":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217 - MiniatureSweet","id":107467571249,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241876.jpeg?v=1517635372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183241876.jpeg?v=1517635372","width":600},{"alt":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217 - MiniatureSweet","id":107467604017,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273228531.jpeg?v=1517635372"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273228531.jpeg?v=1517635372","width":1218},{"alt":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217 - MiniatureSweet","id":107467636785,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242456.jpeg?v=1517635372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242456.jpeg?v=1517635372","width":600},{"alt":"French Bread Baguette Bun (16mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resin Gum Paste Fondant MD217 - MiniatureSweet","id":107467669553,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242000.jpeg?v=1517635372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183242000.jpeg?v=1517635372","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6cm (L) x 0.8cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
French Bread Bun Baguette (13mm) Silicone Flexible P...
Sold Out
{"id":5530219265,"title":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216","handle":"french-bread-bun-baguette-13mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resins-gum-paste-fondant-md216","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (L) x 0.6cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:39:00-11:00","created_at":"2016-03-26T01:39:45-11:00","vendor":"MiniatureSweet","type":"Bread Mold","tags":["bakery mold","biscuit mold","cabochon mold","cell phone deco mold","charms mold","cookie mold","deco mold","decoden mold","dollhouse food mold","Handmade","kawaii mold","polymer clay mold","resin mold","Scrapbooking","Supplies"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943490689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD216","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216","public_title":null,"options":["Default Title"],"price":425,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500079.jpeg?v=1517635379","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500080.jpeg?v=1517635379","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500081.jpeg?v=1517635379","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500082.jpeg?v=1517635379"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500079.jpeg?v=1517635379","options":["Title"],"media":[{"alt":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216 - MiniatureSweet","id":107467276337,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500079.jpeg?v=1517635379"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500079.jpeg?v=1517635379","width":600},{"alt":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216 - MiniatureSweet","id":107467309105,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500080.jpeg?v=1517635379"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500080.jpeg?v=1517635379","width":600},{"alt":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216 - MiniatureSweet","id":107467341873,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500081.jpeg?v=1517635379"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500081.jpeg?v=1517635379","width":600},{"alt":"French Bread Bun Baguette (13mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms Clay Fimo Resins Gum Paste Fondant MD216 - MiniatureSweet","id":107467374641,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500082.jpeg?v=1517635379"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194500082.jpeg?v=1517635379","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (L) x 0.6cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Fruit Soft Mold (7 Cavity) | Apple Orange Kiwi Lemon...
Sold Out
{"id":792148672561,"title":"Fruit Soft Mold (7 Cavity) | Apple Orange Kiwi Lemon Cherry Watermelon Silicone Mould | Kawaii Food Mold | Clear Mold for UV Resin","handle":"fruit-soft-mold-7-cavity-apple-orange-kiwi-lemon-cherry-watermelon-silicone-mould-kawaii-food-mold-clear-mold-for-uv-resin","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted fruit silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eApple: approx. 1.7cm (W) x 1.7cm (L) \/ 0.67\" (W) x 0.67\" (L)\u003c\/p\u003e\n\u003cp\u003eOrange: approx. 1.6cm (Dia) \/ 0.63\" (Dia)\u003c\/p\u003e\n\u003cp\u003eKiwi: approx. 1.5cm (W) x 1.9cm (L) \/ 0.59\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003eLemon: approx. 1.3cm (W) x 1.8cm (L) \/ 0.51\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003eCherry: approx. 1.4cm (W) x 1.7cm (L) \/ 0.55\" (W) x 0.67\" (L)\u003c\/p\u003e\n\u003cp\u003eHalf orange: approx. 1.6cm (W) x 0.8cm (L) \/ 0.63\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003eWatermelon: approx. \u003cspan\u003e1.6cm (W) x 0.8cm (L) \/ 0.63\" (W) x 0.31\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T22:54:09-11:00","created_at":"2018-07-03T22:01:54-11:00","vendor":"MiniatureSweet","type":"Fruit Mold, Mold Mix","tags":["apple mold","cabochon mold","cherry mold","Clear Mold","decoden mold","epoxy resin","flexible mold","food mold","fruit mold","kawaii mold","kiwi mold","lemon mold","orange mold","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold","uv resin","watermelon mold"],"price":349,"price_min":349,"price_max":349,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8935184400433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1203","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Fruit Soft Mold (7 Cavity) | Apple Orange Kiwi Lemon Cherry Watermelon Silicone Mould | Kawaii Food Mold | Clear Mold for UV Resin","public_title":null,"options":["Default Title"],"price":349,"weight":16,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_aef54a19-c227-4de5-98fa-cd7812954d23.jpg?v=1530695579"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_aef54a19-c227-4de5-98fa-cd7812954d23.jpg?v=1530695579","options":["Title"],"media":[{"alt":"Fruit Soft Mold (7 Cavity) | Apple Orange Kiwi Lemon Cherry Watermelon Silicone Mould | Kawaii Food Mold | Clear Mold for UV Resin - MiniatureSweet","id":2596229775495,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_aef54a19-c227-4de5-98fa-cd7812954d23.jpg?v=1530695579"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_aef54a19-c227-4de5-98fa-cd7812954d23.jpg?v=1530695579","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted fruit silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eApple: approx. 1.7cm (W) x 1.7cm (L) \/ 0.67\" (W) x 0.67\" (L)\u003c\/p\u003e\n\u003cp\u003eOrange: approx. 1.6cm (Dia) \/ 0.63\" (Dia)\u003c\/p\u003e\n\u003cp\u003eKiwi: approx. 1.5cm (W) x 1.9cm (L) \/ 0.59\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003eLemon: approx. 1.3cm (W) x 1.8cm (L) \/ 0.51\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003eCherry: approx. 1.4cm (W) x 1.7cm (L) \/ 0.55\" (W) x 0.67\" (L)\u003c\/p\u003e\n\u003cp\u003eHalf orange: approx. 1.6cm (W) x 0.8cm (L) \/ 0.63\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003eWatermelon: approx. \u003cspan\u003e1.6cm (W) x 0.8cm (L) \/ 0.63\" (W) x 0.31\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
G-clef / Music Note (30mm) Silicone Flexible Push Mo...
$5.75 USD
{"id":5530262017,"title":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552","handle":"g-clef-music-note-30mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-sculpey-resin-epoxy-gum-paste-fondant-md552","description":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:53:00-11:00","created_at":"2016-03-26T01:53:49-11:00","vendor":"MiniatureSweet","type":"Music Mold","tags":["beads mold","cabochon mold","cell phone deco mold","cute mold","deco mold","decoden mold","decoration mold","embellishment","Handmade","kawaii mold","Polymer Clay","polymer clay mold","premo mold","soap mold","Supplies","wax mold"],"price":575,"price_min":575,"price_max":575,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943614785,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD552","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552","public_title":null,"options":["Default Title"],"price":575,"weight":14,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579861.jpeg?v=1517635582","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579863.jpeg?v=1517635582","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700555_c11977f1-6983-4567-8f39-ecde6b0964e7.jpeg?v=1517635582","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700556_a2266a96-6250-4aac-bb2d-ea460b843ded.jpeg?v=1517635582"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579861.jpeg?v=1517635582","options":["Title"],"media":[{"alt":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552 - MiniatureSweet","id":107516395569,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579861.jpeg?v=1517635582"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579861.jpeg?v=1517635582","width":600},{"alt":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552 - MiniatureSweet","id":107516428337,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579863.jpeg?v=1517635582"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579863.jpeg?v=1517635582","width":600},{"alt":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552 - MiniatureSweet","id":107516461105,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700555_c11977f1-6983-4567-8f39-ecde6b0964e7.jpeg?v=1517635582"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700555_c11977f1-6983-4567-8f39-ecde6b0964e7.jpeg?v=1517635582","width":600},{"alt":"G-clef \/ Music Note (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Sculpey Resin Epoxy Gum Paste Fondant) MD552 - MiniatureSweet","id":107516493873,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700556_a2266a96-6250-4aac-bb2d-ea460b843ded.jpeg?v=1517635582"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.182700556_a2266a96-6250-4aac-bb2d-ea460b843ded.jpeg?v=1517635582","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Gemstones Soft Mold (5 Cavity) | Oval Gem Silicone M...
$3.99 USD
{"id":792115413041,"title":"Gemstones Soft Mold (5 Cavity) | Oval Gem Silicone Mould | Faceted Gemstone Mold | UV Resin Jewelry Supplies","handle":"gemstones-soft-mold-5-cavity-oval-gem-silicone-mould-faceted-gemstone-mold-uv-resin-jewelry-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of gemstones in various shapes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eOval: approx. 1.8cm (W) x 3cm (L) \/ 0.71\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003ePentagon: approx. 1cm (W) x 2.8cm (L) \/ 0.39\" (W) x 1.1\" (L)\u003c\/p\u003e\n\u003cp\u003eRectangular: approx. 1.8cm (W) x 2.6cm (L) \/ 0.71\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003eOctagon: approx. 1.4cm (W) \/ 0.55\" (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T17:03:13-11:00","created_at":"2018-07-03T15:26:20-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","epoxy resin","Faceted Gemstones","flexible mold","gem mold","gemstone mold","Jewel Mold","kawaii mold","Octagon","oval gemstones","Pentagon","rectangle","Rectangular","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8934241468465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1195","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gemstones Soft Mold (5 Cavity) | Oval Gem Silicone Mould | Faceted Gemstone Mold | UV Resin Jewelry Supplies","public_title":null,"options":["Default Title"],"price":399,"weight":31,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b6ec4f11-e793-4a0e-9468-2eb671fb2da8.jpg?v=1530695581"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b6ec4f11-e793-4a0e-9468-2eb671fb2da8.jpg?v=1530695581","options":["Title"],"media":[{"alt":"Gemstones Soft Mold (5 Cavity) | Oval Gem Silicone Mould | Faceted Gemstone Mold | UV Resin Jewelry Supplies - MiniatureSweet","id":2596219519111,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b6ec4f11-e793-4a0e-9468-2eb671fb2da8.jpg?v=1530695581"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b6ec4f11-e793-4a0e-9468-2eb671fb2da8.jpg?v=1530695581","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of gemstones in various shapes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eOval: approx. 1.8cm (W) x 3cm (L) \/ 0.71\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003ePentagon: approx. 1cm (W) x 2.8cm (L) \/ 0.39\" (W) x 1.1\" (L)\u003c\/p\u003e\n\u003cp\u003eRectangular: approx. 1.8cm (W) x 2.6cm (L) \/ 0.71\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003eOctagon: approx. 1.4cm (W) \/ 0.55\" (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Ghost (26mm) Silicone Flexible Push Mold - Jewelry, ...
Sold Out
{"id":5530287745,"title":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676","handle":"ghost-26mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-resin-wax-soap-epoxy-gum-paste-fondant-md676","description":"\u003cp\u003e★Measurement: approx. 2.3cm (W) x 2.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:58:00-11:00","created_at":"2016-03-26T01:58:37-11:00","vendor":"MiniatureSweet","type":"Skull Mold","tags":["cabochon mold","casting resins mold","chocolate mold","deco mold","decoden mold","decoration mold","embellishment mold","halloween mold","Handmade","polymer clay mold","premo mold","Scrapbooking","sculpey mold","skeleton mold","skull mold","Supplies"],"price":650,"price_min":650,"price_max":650,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943723265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD676","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676","public_title":null,"options":["Default Title"],"price":650,"weight":15,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674680.jpeg?v=1517635646","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674713.jpeg?v=1517635646","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674764.jpeg?v=1517635646","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674811.jpeg?v=1517635646"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674680.jpeg?v=1517635646","options":["Title"],"media":[{"alt":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676 - MiniatureSweet","id":107533140017,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674680.jpeg?v=1517635646"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674680.jpeg?v=1517635646","width":600},{"alt":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676 - MiniatureSweet","id":107533172785,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674713.jpeg?v=1517635646"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674713.jpeg?v=1517635646","width":600},{"alt":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676 - MiniatureSweet","id":107533205553,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674764.jpeg?v=1517635646"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674764.jpeg?v=1517635646","width":600},{"alt":"Ghost (26mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Epoxy, Gum Paste, Fondant) MD676 - MiniatureSweet","id":107533238321,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674811.jpeg?v=1517635646"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187674811.jpeg?v=1517635646","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.3cm (W) x 2.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Giraffe (19mm) Silicone Flexible Push Mold - Miniatu...
$4.75 USD
{"id":5530320577,"title":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804","handle":"giraffe-19mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-epoxy-fondant-gum-paste-soap-md804","description":"\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:03:00-11:00","created_at":"2016-03-26T02:03:19-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","baby deco mold","bead mold","cabochon mold","cell phone deco mold","charms mold","deco mold","deco zoo mold","decoden mold","embellishment mold","Handmade","jewelry mold","kawaii mold","polymer clay mold","Scrapbooking","Supplies"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943895553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD804","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804","public_title":null,"options":["Default Title"],"price":475,"weight":8,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524530.jpeg?v=1517635875","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524552.jpeg?v=1517635875","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002_0a14670a-90c5-4021-be56-1fe5bf10cac8.jpeg?v=1517635875","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039_13d13d47-1e8b-4efc-aa9a-649e4881db7a.jpeg?v=1517635875"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524530.jpeg?v=1517635875","options":["Title"],"media":[{"alt":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804 - MiniatureSweet","id":107551457329,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524530.jpeg?v=1517635875"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524530.jpeg?v=1517635875","width":600},{"alt":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804 - MiniatureSweet","id":107551490097,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524552.jpeg?v=1517635875"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247524552.jpeg?v=1517635875","width":600},{"alt":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804 - MiniatureSweet","id":107551522865,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002_0a14670a-90c5-4021-be56-1fe5bf10cac8.jpeg?v=1517635875"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002_0a14670a-90c5-4021-be56-1fe5bf10cac8.jpeg?v=1517635875","width":600},{"alt":"Giraffe (19mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Epoxy, Fondant, Gum Paste, Soap) MD804 - MiniatureSweet","id":107551555633,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039_13d13d47-1e8b-4efc-aa9a-649e4881db7a.jpeg?v=1517635875"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039_13d13d47-1e8b-4efc-aa9a-649e4881db7a.jpeg?v=1517635875","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Giraffe (20mm) Silicone Flexible Push Mold - Jewelry...
$4.95 USD
{"id":5530244289,"title":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431","handle":"giraffe-20mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resins-epoxy-wax-soap-gum-paste-fondant-md431","description":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:49:00-11:00","created_at":"2016-03-26T01:49:41-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bead mold","cabochon mold","cell phone deco mold","deco mold","decoden mold","decoration mold","embellishment mold","Handmade","kawaii mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","Supplies","zoo deco mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943558849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD431","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431","public_title":null,"options":["Default Title"],"price":495,"weight":7,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575936.jpeg?v=1517635827","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575912.jpeg?v=1517635827","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002.jpeg?v=1517635827","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039.jpeg?v=1517635827"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575936.jpeg?v=1517635827","options":["Title"],"media":[{"alt":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431 - MiniatureSweet","id":107500240945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575936.jpeg?v=1517635827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575936.jpeg?v=1517635827","width":600},{"alt":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431 - MiniatureSweet","id":107500273713,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575912.jpeg?v=1517635827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185575912.jpeg?v=1517635827","width":600},{"alt":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431 - MiniatureSweet","id":107500306481,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002.jpeg?v=1517635827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576002.jpeg?v=1517635827","width":600},{"alt":"Giraffe (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resins Epoxy Wax Soap Gum Paste Fondant) MD431 - MiniatureSweet","id":107500339249,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039.jpeg?v=1517635827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.185576039.jpeg?v=1517635827","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Gummy Candy Silicone Mold in Bear Shape (53 Cavity) ...
$3.79 USD
{"id":8974212609,"title":"Gummy Candy Silicone Mold in Bear Shape (53 Cavity) with Dropper | Kawaii Resin Cabochon Making | Decoden Supplies | Flexible Animal Mold | Food Safe Mold (11mm x 18mm)","handle":"gummy-candy-silicone-mold-in-bear-shape-53-cavity-with-dropper-kawaii-resin-cabochon-making-decoden-supplies-flexible-animal-mold-food-safe-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e53 cavity bear gummy candy mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for food \/ candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Comes with dropper\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.1cm (W) x 1.8cm (L) x 1.1cm (Depth) \/ 0.43\" (W) x 0.71\" (L) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-03-07T02:35:46-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Candy Mold, Mold Mix","tags":["animal mold","Baking Supplies","bear mold","cabochon mold","candy mold","chocolate mold","decoden mold","epoxy resin","flexible mold","fondant mold","Food Safe Mould","gummy bear","gummy candy","gumpaste mold","kawaii mold","resin art","resin craft","resin crafts","silicone mold","Wax mold"],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31630122113,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3027","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gummy Candy Silicone Mold in Bear Shape (53 Cavity) with Dropper | Kawaii Resin Cabochon Making | Decoden Supplies | Flexible Animal Mold | Food Safe Mold (11mm x 18mm)","public_title":null,"options":["Default Title"],"price":379,"weight":84,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027.jpg?v=1620442909","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027_bfb9197b-3ed3-46ef-9d5b-21062a0af20b.jpg?v=1622218511","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027-02.jpg?v=1620442911"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027.jpg?v=1620442909","options":["Title"],"media":[{"alt":"Gummy Candy Silicone Mold in Bear Shape (53 Cavity) with Dropper | Kawaii Resin Cabochon Making | Decoden Supplies | Flexible Animal Mold | Food Safe Mold (11mm x 18mm) - MiniatureSweet","id":244189954097,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027.jpg?v=1620442909"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027.jpg?v=1620442909","width":600},{"alt":"Gummy Candy Silicone Mold in Bear Shape (53 Cavity) with Dropper | Kawaii Resin Cabochon Making | Decoden Supplies | Flexible Animal Mold | Food Safe Mold (11mm x 18mm) - MiniatureSweet","id":22373520015513,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027_bfb9197b-3ed3-46ef-9d5b-21062a0af20b.jpg?v=1622218511"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027_bfb9197b-3ed3-46ef-9d5b-21062a0af20b.jpg?v=1622218511","width":1000},{"alt":"Gummy Candy Silicone Mold in Bear Shape (53 Cavity) with Dropper | Kawaii Resin Cabochon Making | Decoden Supplies | Flexible Animal Mold | Food Safe Mold (11mm x 18mm) - MiniatureSweet","id":244189986865,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027-02.jpg?v=1620442911"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3027-02.jpg?v=1620442911","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e53 cavity bear gummy candy mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for food \/ candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Comes with dropper\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.1cm (W) x 1.8cm (L) x 1.1cm (Depth) \/ 0.43\" (W) x 0.71\" (L) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Half Strawberry (16mm) Silicone Flexible Push Mold -...
$4.95 USD
{"id":5530323969,"title":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816","handle":"half-strawberry-16mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md816","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:03:00-11:00","created_at":"2016-03-26T02:03:47-11:00","vendor":"MiniatureSweet","type":"Fruit Mold","tags":["cabochon mold","cake mold","cupcake mold","deco mold","decoden mold","dollhouse mold","fake food mold","fruit mold","Handmade","jewelry mold","kawaii mold","mini food mold","polymer clay mold","Scrapbooking","sculpey mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943919105,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD816","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672498.jpeg?v=1517636389","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672535.jpeg?v=1517636389","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672638.jpeg?v=1517636389","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672676_f22bee83-e366-44c4-848b-070f9bf89982.jpeg?v=1517636389"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672498.jpeg?v=1517636389","options":["Title"],"media":[{"alt":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816 - MiniatureSweet","id":107552931889,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672498.jpeg?v=1517636389"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672498.jpeg?v=1517636389","width":600},{"alt":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816 - MiniatureSweet","id":107552964657,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672535.jpeg?v=1517636389"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672535.jpeg?v=1517636389","width":600},{"alt":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816 - MiniatureSweet","id":107552997425,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672638.jpeg?v=1517636389"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672638.jpeg?v=1517636389","width":600},{"alt":"Half Strawberry (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD816 - MiniatureSweet","id":107553030193,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672676_f22bee83-e366-44c4-848b-070f9bf89982.jpeg?v=1517636389"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187672676_f22bee83-e366-44c4-848b-070f9bf89982.jpeg?v=1517636389","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Half Strawberry Silicone Mold | Fruit Cabochon Mould...
$0.99 USD
{"id":1913296388145,"title":"Half Strawberry Silicone Mold | Fruit Cabochon Mould for Resin Art | Sweet Deco Supplies | Kawaii Decoden (20mm x 28mm)","handle":"half-strawberry-silicone-mold-fruit-cabochon-mould-for-resin-art-sweet-deco-supplies-kawaii-decoden","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eHalf strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2cm (W) x 2.8cm (L) \/ 0.8\" (W) x 1.09\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T21:07:25-11:00","created_at":"2019-03-25T19:56:19-11:00","vendor":"MiniatureSweet","type":"Fruit Mold","tags":["cabochon mold","Clear Mold","Decoden mold","embellishment mold","epoxy resin","flexible mold","fruit mold","half strawberry","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","strawberry mold","sweet deco","sweets deco","UV Resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14963354239025,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD830A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Half Strawberry Silicone Mold | Fruit Cabochon Mould for Resin Art | Sweet Deco Supplies | Kawaii Decoden (20mm x 28mm)","public_title":null,"options":["Default Title"],"price":99,"weight":17,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_1fa5a00b-cfef-4fe0-889b-1bd3aff8cd85.jpg?v=1553646558"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_1fa5a00b-cfef-4fe0-889b-1bd3aff8cd85.jpg?v=1553646558","options":["Title"],"media":[{"alt":"Half Strawberry Silicone Mold | Fruit Cabochon Mould for Resin Art | Sweet Deco Supplies | Kawaii Decoden (20mm x 28mm) - MiniatureSweet","id":2803807256711,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_1fa5a00b-cfef-4fe0-889b-1bd3aff8cd85.jpg?v=1553646558"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_1fa5a00b-cfef-4fe0-889b-1bd3aff8cd85.jpg?v=1553646558","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eHalf strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2cm (W) x 2.8cm (L) \/ 0.8\" (W) x 1.09\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Halloween Assortment Silicone Mold (3 Cavity) | Spid...
$5.99 USD
{"id":10341061121,"title":"Halloween Assortment Silicone Mold (3 Cavity) | Spider Heart Organ Animal Horn Mold | Halloween Resin Cabochon Making | Spooky Decoration","handle":"halloween-assortment-silicone-mold-3-cavity-spider-heart-organ-animal-horn-mold-halloween-resin-cabochon-making-spooky-decoration","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Halloween silicone mold in the shape of spider, heart organ and animal horn. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Spider: approx. 3.5cm (W) x 5cm (L) \/ 1.38\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e- Heart Organ: approx. 2.4cm (W) x 4cm (L) \/ 0.94\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e- Animal Horn: approx. 1.8cm (W) x 5.4cm (L) \/ 0.71\" (W) x 2.13\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-22T20:52:12-11:00","vendor":"MiniatureSweet","type":"Insect Mold, Animal Mold, Other Mold, Mold Mix","tags":["animal mold","cabochon mold","creepy","decoden mold","epoxy resin","flexible mold","food safe","halloween mold","heart mold","horn mold","insect mold","Kawaii Goth","organ mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","spider mold","spooky"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38665826049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD022A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Halloween Assortment Silicone Mold (3 Cavity) | Spider Heart Organ Animal Horn Mold | Halloween Resin Cabochon Making | Spooky Decoration","public_title":null,"options":["Default Title"],"price":599,"weight":107,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD022A.jpg?v=1517671510"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD022A.jpg?v=1517671510","options":["Title"],"media":[{"alt":"Halloween Assortment Silicone Mold (3 Cavity) | Spider Heart Organ Animal Horn Mold | Halloween Resin Cabochon Making | Spooky Decoration - MiniatureSweet","id":422783189041,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD022A.jpg?v=1517671510"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD022A.jpg?v=1517671510","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Halloween silicone mold in the shape of spider, heart organ and animal horn. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Spider: approx. 3.5cm (W) x 5cm (L) \/ 1.38\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e- Heart Organ: approx. 2.4cm (W) x 4cm (L) \/ 0.94\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e- Animal Horn: approx. 1.8cm (W) x 5.4cm (L) \/ 0.71\" (W) x 2.13\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Halloween Ornament Silicone Mold (8 Cavity) | Kawaii...
Sold Out
{"id":7107135307929,"title":"Halloween Ornament Silicone Mold (8 Cavity) | Kawaii Goth Jewelry DIY | Skull Skeleton Crystal Ball Pumpkin Vampire Mould | Resin Art Supplies","handle":"halloween-ornament-silicone-mold-kawaii-goth-jewelry-diy-skull-skeleton-crystal-ball-pumpkin-vampire-mould-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCreepy cute Halloween silicone mold assortment. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/002-03_83066744-4b4b-4680-906d-79b20619b3e5_480x480.jpg?v=1632380394\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/002-03_83066744-4b4b-4680-906d-79b20619b3e5_480x480.jpg?v=1632380394\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e★Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-09-22T20:09:59-11:00","created_at":"2021-09-22T19:59:10-11:00","vendor":"MiniatureSweet","type":"Other Mold, Skull Mold, Mold Mix","tags":["cabochon mold","Clear Mold","creepy cute","crow mold","crystal ball","decoden mold","Engraved mold","epoxy resin","Flexible Mold","gothic","halloween mold","halloween pumpkin","kawaii goth","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","skeleton mold","skull mold","soft mold","UV resin","vampire teeth mold"],"price":799,"price_min":799,"price_max":799,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41191559954585,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD5060C","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Halloween Ornament Silicone Mold (8 Cavity) | Kawaii Goth Jewelry DIY | Skull Skeleton Crystal Ball Pumpkin Vampire Mould | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":799,"weight":145,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-04_9efbbce2-979c-4b28-a8f6-ca300aff8bcc.jpg?v=1632380370","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_2e3182bd-2cec-4f04-ac14-3ffad34885cc.jpg?v=1632380369","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_d0aa1c7a-8eb6-4b14-aefb-569bcd2ea21f.jpg?v=1632380369"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-04_9efbbce2-979c-4b28-a8f6-ca300aff8bcc.jpg?v=1632380370","options":["Title"],"media":[{"alt":"Halloween Ornament Silicone Mold (8 Cavity) | Kawaii Goth Jewelry DIY | Skull Skeleton Crystal Ball Pumpkin Vampire Mould | Resin Art Supplies - MiniatureSweet","id":24518609010841,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-04_9efbbce2-979c-4b28-a8f6-ca300aff8bcc.jpg?v=1632380370"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-04_9efbbce2-979c-4b28-a8f6-ca300aff8bcc.jpg?v=1632380370","width":1000},{"alt":"Halloween Ornament Silicone Mold (8 Cavity) | Kawaii Goth Jewelry DIY | Skull Skeleton Crystal Ball Pumpkin Vampire Mould | Resin Art Supplies - MiniatureSweet","id":24518609076377,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_2e3182bd-2cec-4f04-ac14-3ffad34885cc.jpg?v=1632380369"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_2e3182bd-2cec-4f04-ac14-3ffad34885cc.jpg?v=1632380369","width":600},{"alt":"Halloween Ornament Silicone Mold (8 Cavity) | Kawaii Goth Jewelry DIY | Skull Skeleton Crystal Ball Pumpkin Vampire Mould | Resin Art Supplies - MiniatureSweet","id":24518608978073,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_d0aa1c7a-8eb6-4b14-aefb-569bcd2ea21f.jpg?v=1632380369"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_d0aa1c7a-8eb6-4b14-aefb-569bcd2ea21f.jpg?v=1632380369","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCreepy cute Halloween silicone mold assortment. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/002-03_83066744-4b4b-4680-906d-79b20619b3e5_480x480.jpg?v=1632380394\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/002-03_83066744-4b4b-4680-906d-79b20619b3e5_480x480.jpg?v=1632380394\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e★Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Halloween Witch Hat Mold | Kawaii Goth Decoden Mold ...
Sold Out
{"id":8541476993,"title":"Halloween Witch Hat Mold | Kawaii Goth Decoden Mold | Spooky Cabochon Mold | Clear Resin Mold | Flexible Silicone Mould (18mm x 13mm)","handle":"halloween-witch-hat-mold-kawaii-goth-decoden-mold-spooky-cabochon-mold-clear-resin-mold-flexible-silicone-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible witch hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.8cm (W) x 1.3cm (L) \/ 0.71\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T19:53:00-11:00","created_at":"2016-12-13T19:46:17-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["Cabochon Mold","Clear Resin Mold","creepy jewelry","decoden mold","epoxy resin mold","Flexible Mold","halloween craft","halloween mold","Kawaii Goth","silicone mould","spooky cabochon","uv resin mould","Witch Hat Mold"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28829556865,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD983","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Halloween Witch Hat Mold | Kawaii Goth Decoden Mold | Spooky Cabochon Mold | Clear Resin Mold | Flexible Silicone Mould (18mm x 13mm)","public_title":null,"options":["Default Title"],"price":99,"weight":3,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD983.jpg?v=1517665722"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD983.jpg?v=1517665722","options":["Title"],"media":[{"alt":"Halloween Witch Hat Mold | Kawaii Goth Decoden Mold | Spooky Cabochon Mold | Clear Resin Mold | Flexible Silicone Mould (18mm x 13mm) - MiniatureSweet","id":207834677297,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD983.jpg?v=1517665722"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD983.jpg?v=1517665722","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible witch hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.8cm (W) x 1.3cm (L) \/ 0.71\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Handbag (23mm) Silicone Flexible Push Mold - Miniatu...
Sold Out
{"id":5530298881,"title":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723","handle":"handbag-23mm-silicone-flexible-push-mold-miniature-food-sweets-cupcake-jewelry-charms-clay-fimo-epoxy-gum-paste-fondant-wax-md723","description":"\u003cp\u003e★Measurement: approx. 2.3cm (W) x 2.2cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:00:00-11:00","created_at":"2016-03-26T02:00:24-11:00","vendor":"MiniatureSweet","type":"Fashion Accessory Mold","tags":["cabochon mold","case mold","cell phone deco mold","charm mold","deco mold","decoden mold","dollhouse deco mold","embellishment mold","Handmade","jewelry mold","kawaii mold","polymer clay mold","resin mold","Scrapbooking","Supplies","wax mold"],"price":545,"price_min":545,"price_max":545,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943767809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD723","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723","public_title":null,"options":["Default Title"],"price":545,"weight":11,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915626.jpeg?v=1517636549","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915627.jpeg?v=1517636549","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915628.jpeg?v=1517636549","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915629.jpeg?v=1517636549"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915626.jpeg?v=1517636549","options":["Title"],"media":[{"alt":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723 - MiniatureSweet","id":107539922993,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915626.jpeg?v=1517636549"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915626.jpeg?v=1517636549","width":600},{"alt":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723 - MiniatureSweet","id":107539955761,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915627.jpeg?v=1517636549"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915627.jpeg?v=1517636549","width":600},{"alt":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723 - MiniatureSweet","id":107539988529,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915628.jpeg?v=1517636549"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915628.jpeg?v=1517636549","width":600},{"alt":"Handbag (23mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Cupcake, Jewelry, Charms (Clay Fimo Epoxy Gum Paste Fondant Wax) MD723 - MiniatureSweet","id":107540021297,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915629.jpeg?v=1517636549"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915629.jpeg?v=1517636549","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.3cm (W) x 2.2cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Handbag Mold | High Heel Mold | Hand Fan Mold | Lady...
$3.49 USD
{"id":8679570881,"title":"Handbag Mold | High Heel Mold | Hand Fan Mold | Lady Accessory Silicone Mold (14 Cavity) | Food Safe Chocolate Mold | Kawaii Decoden Cabochon Making","handle":"handbag-mold-high-heel-mold-hand-fan-mold-lady-accessory-silicone-mold-14-cavity-food-safe-chocolate-mold-kawaii-decoden-cabochon-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e14 cavity lady accessory mold in the shapes of handbag, high heel and hand fan. Made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Handbag: approx. 3cm (W) x 3cm (L) x 1.4cm (Depth) \/ 1.18\" (W) x 1.8\" (L) x 0.56\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- High Heel: approx. 4.2cm (W) x 3cm (L) x 1.3cm (Depth) \/ 1.65\" (W) x 1.8\" (L) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Hand Fan: approx. 3.6cm (W) x 3.1cm (L) x 1.3cm (Depth) \/ 1.42\" (W) x 1.22\" (L) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-14T23:47:00-11:00","created_at":"2017-01-17T15:16:40-11:00","vendor":"MiniatureSweet","type":"Fashion Accessory Mold, Mold Mix","tags":["cabochon making","Chocolate Mold","Cinderella","Decoden Cabochon","decoden mold","Food Safe Mold","Hand Fan Mold","Handbag Mold","High Heel Mold","Kawaii Decoden","Lady Accessory","lady bag mold","Party Supplies","Purse mold","Silicone Mold"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29497302081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2021","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbag Mold | High Heel Mold | Hand Fan Mold | Lady Accessory Silicone Mold (14 Cavity) | Food Safe Chocolate Mold | Kawaii Decoden Cabochon Making","public_title":null,"options":["Default Title"],"price":349,"weight":72,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021.jpg?v=1517666817","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021-02.jpg?v=1517666817"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021.jpg?v=1517666817","options":["Title"],"media":[{"alt":"Handbag Mold | High Heel Mold | Hand Fan Mold | Lady Accessory Silicone Mold (14 Cavity) | Food Safe Chocolate Mold | Kawaii Decoden Cabochon Making - MiniatureSweet","id":224137576497,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021.jpg?v=1517666817"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021.jpg?v=1517666817","width":600},{"alt":"Handbag Mold | High Heel Mold | Hand Fan Mold | Lady Accessory Silicone Mold (14 Cavity) | Food Safe Chocolate Mold | Kawaii Decoden Cabochon Making - MiniatureSweet","id":224137609265,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021-02.jpg?v=1517666817"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2021-02.jpg?v=1517666817","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e14 cavity lady accessory mold in the shapes of handbag, high heel and hand fan. Made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Handbag: approx. 3cm (W) x 3cm (L) x 1.4cm (Depth) \/ 1.18\" (W) x 1.8\" (L) x 0.56\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- High Heel: approx. 4.2cm (W) x 3cm (L) x 1.3cm (Depth) \/ 1.65\" (W) x 1.8\" (L) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Hand Fan: approx. 3.6cm (W) x 3.1cm (L) x 1.3cm (Depth) \/ 1.42\" (W) x 1.22\" (L) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Heart (7mm) Silicone Flexible Push Mold - Miniature ...
Sold Out
{"id":5530254273,"title":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498","handle":"heart-7mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resins-gum-paste-fondant-md498","description":"\u003cp\u003e★Measurement: Approx. 0.7cm (W) x 0.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:52:00-11:00","created_at":"2016-03-26T01:52:02-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["cell phone deco mold","charm mold","cute kawaii mold","cute mold","deco mold","decoden mold","decoration mold","embellishment mold","Handmade","jewelry mold","kawaii mold","love mold","polymer clay mold","Scrapbooking","scrapbooking mold","Supplies"],"price":325,"price_min":325,"price_max":325,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943593217,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD498","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498","public_title":null,"options":["Default Title"],"price":325,"weight":5,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310702.jpeg?v=1517636798","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310703.jpeg?v=1517636798","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310704.jpeg?v=1517636798","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310705.jpeg?v=1517636798"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310702.jpeg?v=1517636798","options":["Title"],"media":[{"alt":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498 - MiniatureSweet","id":107509219377,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310702.jpeg?v=1517636798"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310702.jpeg?v=1517636798","width":600},{"alt":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498 - MiniatureSweet","id":107509252145,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310703.jpeg?v=1517636798"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310703.jpeg?v=1517636798","width":600},{"alt":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498 - MiniatureSweet","id":107509284913,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310704.jpeg?v=1517636798"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310704.jpeg?v=1517636798","width":600},{"alt":"Heart (7mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD498 - MiniatureSweet","id":107509317681,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310705.jpeg?v=1517636798"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184310705.jpeg?v=1517636798","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 0.7cm (W) x 0.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Cake with Decorative Border (22mm) Silicone Fl...
$5.25 USD
{"id":5530284353,"title":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660","handle":"heart-cake-with-decorative-border-22mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-fondant-md660","description":"\u003cp\u003e★Measurement: approx. 2.2cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:58:00-11:00","created_at":"2016-03-26T01:58:02-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["bead mold","cabochon mold","cell phone mold","deco mold","decoden mold","decoration mold","dollhouse food mold","fake food mold","Handmade","kawaii decoden mold","kawaii mold","mini food mold","polymer clay mold","resin mold","Scrapbooking","Supplies"],"price":525,"price_min":525,"price_max":525,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943709441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD660","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660","public_title":null,"options":["Default Title"],"price":525,"weight":15,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247563515.jpeg?v=1517636870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247529152.jpeg?v=1517636870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_bfaccb88-67c9-4348-b41b-92745301f0d3.jpeg?v=1517636870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_fa8138cb-06d4-420a-b78c-8e5131d54567.jpeg?v=1517636870"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247563515.jpeg?v=1517636870","options":["Title"],"media":[{"alt":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660 - MiniatureSweet","id":107530747953,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247563515.jpeg?v=1517636870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247563515.jpeg?v=1517636870","width":600},{"alt":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660 - MiniatureSweet","id":107530780721,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247529152.jpeg?v=1517636870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247529152.jpeg?v=1517636870","width":600},{"alt":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660 - MiniatureSweet","id":107530813489,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_bfaccb88-67c9-4348-b41b-92745301f0d3.jpeg?v=1517636870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_bfaccb88-67c9-4348-b41b-92745301f0d3.jpeg?v=1517636870","width":600},{"alt":"Heart Cake with Decorative Border (22mm) Silicone Flexible Push Mold - Miniature Food Sweets Jewelry Charms (Clay Fimo Resin Fondant) MD660 - MiniatureSweet","id":107530846257,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_fa8138cb-06d4-420a-b78c-8e5131d54567.jpeg?v=1517636870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_fa8138cb-06d4-420a-b78c-8e5131d54567.jpeg?v=1517636870","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.2cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Chocolate / Truffle/ Bon Bon (17mm) Silicone F...
$4.75 USD
{"id":5530232513,"title":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365","handle":"heart-chocolate-truffle-bon-bon-17mm-silicone-flexible-push-mold-miniature-food-sweets-charms-clay-fimo-gum-paste-fondant-md365","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.5cm (L) x 0.6cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:46:00-11:00","created_at":"2016-03-26T01:46:21-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["Cabochon","Commercial","deco mold","decoden mold","dollhouse mold","embellishment mold","fake food mold","jewelry mold","kawaii mold","kitsch jewelry mold","mini food mold","resin mold","scrapbooking mold","Supplies","valentine mold","wax mold"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943514753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD365","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365","public_title":null,"options":["Default Title"],"price":475,"weight":9,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237300084.jpeg?v=1517636974","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237317441.jpeg?v=1517636974","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296620.jpeg?v=1517636974","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296622.jpeg?v=1517636974","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296624.jpeg?v=1517636974"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237300084.jpeg?v=1517636974","options":["Title"],"media":[{"alt":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365 - MiniatureSweet","id":107490443313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237300084.jpeg?v=1517636974"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237300084.jpeg?v=1517636974","width":600},{"alt":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365 - MiniatureSweet","id":107490476081,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237317441.jpeg?v=1517636974"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237317441.jpeg?v=1517636974","width":600},{"alt":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365 - MiniatureSweet","id":107490508849,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296620.jpeg?v=1517636974"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296620.jpeg?v=1517636974","width":600},{"alt":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365 - MiniatureSweet","id":107490541617,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296622.jpeg?v=1517636974"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296622.jpeg?v=1517636974","width":600},{"alt":"Heart Chocolate \/ Truffle\/ Bon Bon (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay Fimo Gum Paste Fondant) MD365 - MiniatureSweet","id":107490574385,"position":5,"preview_image":{"aspect_ratio":1.167,"height":514,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296624.jpeg?v=1517636974"},"aspect_ratio":1.167,"height":514,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237296624.jpeg?v=1517636974","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.5cm (L) x 0.6cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Macaron Mold 24mm Flexible Silicone Mold Kawai...
Sold Out
{"id":5530222785,"title":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254","handle":"heart-macaron-mold-24mm-flexible-silicone-mold-kawaii-cell-phone-deco-miniature-sweets-kitsch-jewelry-charms-decoden-cabochon-mold-md254","description":"\u003cp\u003eHeart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Mold Miniature Sweets Mold Kitsch Jewelry Charms Decoden Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.4cm (W) x 2cm (L) x 0.55cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:41:00-11:00","created_at":"2016-03-26T01:41:23-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["cell phone deco mold","decoden mold","flexible mold","french macaroon","heart macaron mold","kitsch jewelry mold","macaron charms mold","mini food mold","miniature sweet mold","polymer clay mold","silicone mold","Supplies","sweets cabochon mold","sweets charms mold"],"price":545,"price_min":545,"price_max":545,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943495553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD254","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254","public_title":null,"options":["Default Title"],"price":545,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340467606.jpeg?v=1517637174","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340345105.jpeg?v=1517637174","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514811_29b1fa7a-4e05-41be-8fd4-c9231bb0b835.jpeg?v=1517637174","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023775_9047af30-0946-40e7-8c40-3560094ef414.jpeg?v=1517637174","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.768102677_k6f0.jpeg?v=1517637174"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340467606.jpeg?v=1517637174","options":["Title"],"media":[{"alt":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254 - MiniatureSweet","id":107473043505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340467606.jpeg?v=1517637174"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340467606.jpeg?v=1517637174","width":600},{"alt":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254 - MiniatureSweet","id":107473076273,"position":2,"preview_image":{"aspect_ratio":1.008,"height":595,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340345105.jpeg?v=1517637174"},"aspect_ratio":1.008,"height":595,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340345105.jpeg?v=1517637174","width":600},{"alt":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254 - MiniatureSweet","id":107473109041,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514811_29b1fa7a-4e05-41be-8fd4-c9231bb0b835.jpeg?v=1517637174"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514811_29b1fa7a-4e05-41be-8fd4-c9231bb0b835.jpeg?v=1517637174","width":1218},{"alt":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254 - MiniatureSweet","id":107473141809,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023775_9047af30-0946-40e7-8c40-3560094ef414.jpeg?v=1517637174"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023775_9047af30-0946-40e7-8c40-3560094ef414.jpeg?v=1517637174","width":600},{"alt":"Heart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Miniature Sweets Kitsch Jewelry Charms Decoden Cabochon Mold MD254 - MiniatureSweet","id":107473174577,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.768102677_k6f0.jpeg?v=1517637174"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.768102677_k6f0.jpeg?v=1517637174","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHeart Macaron Mold 24mm Flexible Silicone Mold Kawaii Cell Phone Deco Mold Miniature Sweets Mold Kitsch Jewelry Charms Decoden Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.4cm (W) x 2cm (L) x 0.55cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Mold 21mm Silicone Flexible Mold Mini Cupcake ...
$5.25 USD
{"id":5530256129,"title":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510","handle":"heart-mold-21mm-silicone-flexible-mold-mini-cupcake-topper-fondand-gumpaste-mold-jewelry-earrings-ring-pendant-low-melt-metals-mold-md510","description":"\u003cp\u003eHeart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Mold Low Melt Metals Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.1cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:52:00-11:00","created_at":"2016-03-26T01:52:23-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["cell phone deco mold","decoden mold","earrings mold","flexible mold","Handmade","heart mold","kawaii cabochon mold","love mold","low melt metal mold","pendant mold","ring mold","Scrapbooking","silicone mold","Supplies","upcake topper mold","valentine mold"],"price":525,"price_min":525,"price_max":525,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943598273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD510","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510","public_title":null,"options":["Default Title"],"price":525,"weight":9,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060658.jpeg?v=1517637263","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060710.jpeg?v=1517637263","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060780.jpeg?v=1517637263","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060834.jpeg?v=1517637263"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060658.jpeg?v=1517637263","options":["Title"],"media":[{"alt":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510 - MiniatureSweet","id":107510857777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060658.jpeg?v=1517637263"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060658.jpeg?v=1517637263","width":600},{"alt":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510 - MiniatureSweet","id":107510890545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060710.jpeg?v=1517637263"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060710.jpeg?v=1517637263","width":600},{"alt":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510 - MiniatureSweet","id":107510923313,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060780.jpeg?v=1517637263"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060780.jpeg?v=1517637263","width":600},{"alt":"Heart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Low Melt Metals Mold MD510 - MiniatureSweet","id":107510956081,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060834.jpeg?v=1517637263"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184060834.jpeg?v=1517637263","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHeart Mold 21mm Silicone Flexible Mold Mini Cupcake Topper Fondand Gumpaste Mold Jewelry Earrings Ring Pendant Mold Low Melt Metals Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.1cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Mold | Clear Silicone Mold for UV Resin | Play...
$2.29 USD
{"id":541081960497,"title":"Heart Mold | Clear Silicone Mold for UV Resin | Playing Card Suit Mold | Valentine's Day Craft | Kawaii Decoden Supplies (36mm x 31mm)","handle":"heart-mold-clear-silicone-mold-for-uv-resin-playing-card-suit-mold-valentines-day-craft-kawaii-decoden-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePlaying card heart suit silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.6cm (W) x 3.1cm (L) \/ 1.42\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-03-11T21:20:00-11:00","created_at":"2018-03-11T22:50:04-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Other Mold","tags":["Alice in Wonderland","cabochon mold","Clear Mold","decoden mold","flexible mold","heart mold","heart suit mold","love","playing card mold","resin mold","resin mould","Silicone Mold","soft mold","suit card mold","valentine's day","wedding"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276102778929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD240A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heart Mold | Clear Silicone Mold for UV Resin | Playing Card Suit Mold | Valentine's Day Craft | Kawaii Decoden Supplies (36mm x 31mm)","public_title":null,"options":["Default Title"],"price":229,"weight":22,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD240A.jpg?v=1520938040"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD240A.jpg?v=1520938040","options":["Title"],"media":[{"alt":"Heart Mold | Clear Silicone Mold for UV Resin | Playing Card Suit Mold | Valentine's Day Craft | Kawaii Decoden Supplies (36mm x 31mm) - MiniatureSweet","id":2520249598087,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD240A.jpg?v=1520938040"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD240A.jpg?v=1520938040","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePlaying card heart suit silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.6cm (W) x 3.1cm (L) \/ 1.42\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Heart Shaped Chocolate (13mm) Silicone Flexible Push...
$4.75 USD
{"id":5530232321,"title":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363","handle":"heart-shaped-chocolate-13mm-silicone-flexible-push-mold-miniature-food-cupcake-jewelry-charms-resin-clay-fimo-fondant-gum-paste-md363","description":"\u003cp\u003e★Measurement: Approx. 1.2cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:46:00-11:00","created_at":"2016-03-26T01:46:15-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["beads mold","cabochon mold","Commercial","deco mold","decoden mold","dollhouse food mold","embellishment mold","fake food mold","kawaii mold","kitsch jewelry mold","mini food mold","Polymer Clay","scrapbooking mold","sculpey mold","Supplies","wax mold"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943514113,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD363","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363","public_title":null,"options":["Default Title"],"price":475,"weight":7,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836076.jpeg?v=1517637329","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836077.jpeg?v=1517637329","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836078.jpeg?v=1517637329","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836079.jpeg?v=1517637329"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836076.jpeg?v=1517637329","options":["Title"],"media":[{"alt":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363 - MiniatureSweet","id":107490148401,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836076.jpeg?v=1517637329"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836076.jpeg?v=1517637329","width":600},{"alt":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363 - MiniatureSweet","id":107490181169,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836077.jpeg?v=1517637329"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836077.jpeg?v=1517637329","width":600},{"alt":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363 - MiniatureSweet","id":107490213937,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836078.jpeg?v=1517637329"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836078.jpeg?v=1517637329","width":600},{"alt":"Heart Shaped Chocolate (13mm) Silicone Flexible Push Mold - Miniature Food Cupcake Jewelry Charms (Resin Clay Fimo Fondant Gum Paste) MD363 - MiniatureSweet","id":107490246705,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836079.jpeg?v=1517637329"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187836079.jpeg?v=1517637329","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.2cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Shaped Cookie / Biscuit (11mm) Silicone Flexib...
Sold Out
{"id":5530312641,"title":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771","handle":"heart-shaped-cookie-biscuit-11mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-gum-paste-fondant-md771","description":"\u003cp\u003e★Measurement: approx. 1.1cm (W) x 1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:02:00-11:00","created_at":"2016-03-26T02:02:11-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["bakery mold","cabochon mold","deco mold","decoden mold","dollhouse food mold","embellishment mold","fake food mold","Handmade","jewelry mold","kawaii mold","mini food mold","polymer clay mold","resin mold","Scrapbooking","sculpey mold","Supplies"],"price":395,"price_min":395,"price_max":395,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943846529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD771","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771","public_title":null,"options":["Default Title"],"price":395,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960302.jpeg?v=1517637363","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960336.jpeg?v=1517637363","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272510825.jpeg?v=1517637363","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960372.jpeg?v=1517637363","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960408.jpeg?v=1517637363"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960302.jpeg?v=1517637363","options":["Title"],"media":[{"alt":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771 - MiniatureSweet","id":107547033649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960302.jpeg?v=1517637363"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960302.jpeg?v=1517637363","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771 - MiniatureSweet","id":107547066417,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960336.jpeg?v=1517637363"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960336.jpeg?v=1517637363","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771 - MiniatureSweet","id":107547099185,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272510825.jpeg?v=1517637363"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272510825.jpeg?v=1517637363","width":1218},{"alt":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771 - MiniatureSweet","id":107547131953,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960372.jpeg?v=1517637363"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960372.jpeg?v=1517637363","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (11mm) Silicone Flexible Push Mold Miniature Food Sweets Jewelry Charms (Clay, Fimo, Gum Paste, Fondant) MD771 - MiniatureSweet","id":107547164721,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960408.jpeg?v=1517637363"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.184960408.jpeg?v=1517637363","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.1cm (W) x 1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Shaped Cookie / Biscuit (15mm) Silicone Flexib...
Sold Out
{"id":5530211713,"title":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140","handle":"heart-shaped-cookie-biscuit-15mm-silicone-flexible-push-mold-miniature-food-sweets-charms-clay-fimo-resin-gum-paste-md140","description":"\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:36:00-11:00","created_at":"2016-03-26T01:36:05-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["cabochon mold","cell phone deco mold","cupcake mold","cute mold","deco mold","decoden mold","dollhouse sweet mold","fake food mold","Handmade","kawaii mold","mini food mold","polymer clay mold","resin mold","Scrapbooking","sculpey mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943479745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD140","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140","public_title":null,"options":["Default Title"],"price":425,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712203.jpeg?v=1517637372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712212.jpeg?v=1517637372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272518269.jpeg?v=1517637372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712235.jpeg?v=1517637372","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712257.jpeg?v=1517637372"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712203.jpeg?v=1517637372","options":["Title"],"media":[{"alt":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140 - MiniatureSweet","id":107454267441,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712203.jpeg?v=1517637372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712203.jpeg?v=1517637372","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140 - MiniatureSweet","id":107454300209,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712212.jpeg?v=1517637372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712212.jpeg?v=1517637372","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140 - MiniatureSweet","id":107454332977,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272518269.jpeg?v=1517637372"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272518269.jpeg?v=1517637372","width":1218},{"alt":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140 - MiniatureSweet","id":107454365745,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712235.jpeg?v=1517637372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712235.jpeg?v=1517637372","width":600},{"alt":"Heart Shaped Cookie \/ Biscuit (15mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste) MD140 - MiniatureSweet","id":107454398513,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712257.jpeg?v=1517637372"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.179712257.jpeg?v=1517637372","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Shaped Flower / Rose Cameo (15mm) Silicone Fle...
Sold Out
{"id":5530274305,"title":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608","handle":"heart-shaped-flower-rose-cameo-15mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-resins-epoxy-fondant-md608","description":"\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:56:00-11:00","created_at":"2016-03-26T01:56:12-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Cameo Mold","tags":["beads mold","cab mold","cabochon mold","deco mold","decoden mold","embellishment","Handmade","kawaii mold","polymer clay mold","rings mold","Scrapbooking","sculpey mold","Supplies","topper mold","vintage mold","wax mold"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943662913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD608","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841327.jpeg?v=1517637368","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841328.jpeg?v=1517637368","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841329.jpeg?v=1517637368","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841330.jpeg?v=1517637368"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841327.jpeg?v=1517637368","options":["Title"],"media":[{"alt":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608 - MiniatureSweet","id":107523833905,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841327.jpeg?v=1517637368"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841327.jpeg?v=1517637368","width":600},{"alt":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608 - MiniatureSweet","id":107523866673,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841328.jpeg?v=1517637368"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841328.jpeg?v=1517637368","width":600},{"alt":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608 - MiniatureSweet","id":107523899441,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841329.jpeg?v=1517637368"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841329.jpeg?v=1517637368","width":600},{"alt":"Heart Shaped Flower \/ Rose Cameo (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resins, Epoxy, Fondant) MD608 - MiniatureSweet","id":107523932209,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841330.jpeg?v=1517637368"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841330.jpeg?v=1517637368","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Heart Shaped Lollipop (16mm) Silicone Flexible Push ...
Sold Out
{"id":5530297921,"title":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719","handle":"heart-shaped-lollipop-16mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-epoxy-wax-fondant-md719","description":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:00:00-11:00","created_at":"2016-03-26T02:00:17-11:00","vendor":"MiniatureSweet","type":"Candy Mold","tags":["cabochon mold","cell phone deco mold","deco mold","decoden mold","dollhouse food mold","embellishment mold","fake food mold","gum paste mold","Handmade","kawaii mold","kitsch jewelry mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943764481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD719","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914755.jpeg?v=1517637381","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914756.jpeg?v=1517637381","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914757.jpeg?v=1517637381","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914758.jpeg?v=1517637381"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914755.jpeg?v=1517637381","options":["Title"],"media":[{"alt":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719 - MiniatureSweet","id":107539398705,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914755.jpeg?v=1517637381"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914755.jpeg?v=1517637381","width":600},{"alt":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719 - MiniatureSweet","id":107539431473,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914756.jpeg?v=1517637381"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914756.jpeg?v=1517637381","width":600},{"alt":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719 - MiniatureSweet","id":107539464241,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914757.jpeg?v=1517637381"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914757.jpeg?v=1517637381","width":600},{"alt":"Heart Shaped Lollipop (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Wax Fondant) MD719 - MiniatureSweet","id":107539497009,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914758.jpeg?v=1517637381"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193914758.jpeg?v=1517637381","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 1.6cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Hexagon Silicone Mold | Small Coaster Flexible Mold ...
$3.59 USD
{"id":1806582415409,"title":"Hexagon Silicone Mold | Small Coaster Flexible Mold | Geometry Mold | Geometric Mold | Clear Mold for UV Resin Art | Epoxy Resin Mould (75mm x 65mm)","handle":"hexagon-silicone-mold-small-coaster-flexible-mold-geometry-mold-geometric-mold-clear-mold-for-uv-resin-art-epoxy-resin-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eHexagon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 7.5cm (W) x 6.5cm (L) \/ 2.95\" (W) x 2.56\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-01-06T23:34:38-11:00","created_at":"2019-01-06T22:07:03-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Coaster Mold","tags":["cabochon mold","Clear Mold","coaster mold","Decoden mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","hexagon mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","UV Resin"],"price":359,"price_min":359,"price_max":359,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14346842964017,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD141A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hexagon Silicone Mold | Small Coaster Flexible Mold | Geometry Mold | Geometric Mold | Clear Mold for UV Resin Art | Epoxy Resin Mould (75mm x 65mm)","public_title":null,"options":["Default Title"],"price":359,"weight":24,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f339431d-ee82-4e85-ba66-6b33f8e62ed2.jpg?v=1546872678"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f339431d-ee82-4e85-ba66-6b33f8e62ed2.jpg?v=1546872678","options":["Title"],"media":[{"alt":"Hexagon Silicone Mold | Small Coaster Flexible Mold | Geometry Mold | Geometric Mold | Clear Mold for UV Resin Art | Epoxy Resin Mould (75mm x 65mm) - MiniatureSweet","id":2762141466759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f339431d-ee82-4e85-ba66-6b33f8e62ed2.jpg?v=1546872678"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f339431d-ee82-4e85-ba66-6b33f8e62ed2.jpg?v=1546872678","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eHexagon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 7.5cm (W) x 6.5cm (L) \/ 2.95\" (W) x 2.56\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Hippo Cookie (17mm) Silicone Flexible Push Mold - Mi...
Sold Out
{"id":5530242881,"title":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423","handle":"hippo-cookie-17mm-silicone-flexible-push-mold-miniature-food-cupcake-jewelry-charms-resin-paper-clay-fimo-gum-paste-fondant-md423","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:49:00-11:00","created_at":"2016-03-26T01:49:23-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","biscuit mold","cabochon mold","cell phone deco mold","cracker mold","deco mold","decoden mold","dollhouse deco mold","embellishment mold","Handmade","jewelry mold","polymer clay mold","Scrapbooking","sculpey mold","smore mold","Supplies"],"price":445,"price_min":445,"price_max":445,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943553281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD423","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423","public_title":null,"options":["Default Title"],"price":445,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134200.jpeg?v=1517637606","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134202.jpeg?v=1517637606","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158005.jpeg?v=1517637606","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158007.jpeg?v=1517637606"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134200.jpeg?v=1517637606","options":["Title"],"media":[{"alt":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423 - MiniatureSweet","id":107499192369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134200.jpeg?v=1517637606"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134200.jpeg?v=1517637606","width":600},{"alt":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423 - MiniatureSweet","id":107499225137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134202.jpeg?v=1517637606"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244134202.jpeg?v=1517637606","width":600},{"alt":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423 - MiniatureSweet","id":107499257905,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158005.jpeg?v=1517637606"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158005.jpeg?v=1517637606","width":600},{"alt":"Hippo Cookie (17mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Resin Paper Clay Fimo Gum Paste Fondant) MD423 - MiniatureSweet","id":107499290673,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158007.jpeg?v=1517637606"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244158007.jpeg?v=1517637606","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Hollow Latin Cross Mold | Christian Jewelry Making |...
$2.49 USD
{"id":10337415809,"title":"Hollow Latin Cross Mold | Christian Jewelry Making | Cross Pendant Mold | Resin Jewellery Mold | Halloween Decoden Supplies (34mm x 49mm)","handle":"hollow-latin-cross-mold-christian-jewelry-making-cross-pendant-mold-resin-jewellery-mold-halloween-decoden-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.4cm (W) x 4.9cm (L) \/ 1.34\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-10-21T21:18:11-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism Mold","cabochon mold","Catholic cross","christian cross","Clear Mold","cross charm","Cross Mold","cross pendant","decoden mold","epoxy resin","Flexible Mold","Gothic Lolita","halloween mold","Kawaii Goth","latin cross","Religion Jewelry","Religious Jewellery","resin art","resin craft","resin crafts","resin mold","resin mould","roman cross","silicone mold","soft mold","UV resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38648428417,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD035A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Latin Cross Mold | Christian Jewelry Making | Cross Pendant Mold | Resin Jewellery Mold | Halloween Decoden Supplies (34mm x 49mm)","public_title":null,"options":["Default Title"],"price":249,"weight":14,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD035A.jpg?v=1517671495"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD035A.jpg?v=1517671495","options":["Title"],"media":[{"alt":"Hollow Latin Cross Mold | Christian Jewelry Making | Cross Pendant Mold | Resin Jewellery Mold | Halloween Decoden Supplies (34mm x 49mm) - MiniatureSweet","id":422588481585,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD035A.jpg?v=1517671495"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD035A.jpg?v=1517671495","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.4cm (W) x 4.9cm (L) \/ 1.34\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
I Love Zoo Bear (20mm) Silicone Flexible Push Mold -...
$5.45 USD
{"id":5530247169,"title":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451","handle":"i-love-zoo-bear-20mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-epoxy-wax-fondant-gum-paste-md451","description":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:22-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bear mold","decoden mold","decoden supplies","decoration mold","doll deco mold","dollhouse deco mold","embellishment","kawaii mold","miniaturesweet","polymer clay mold","premo mold","sculpey mold","Supplies"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943568257,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD451","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451","public_title":null,"options":["Default Title"],"price":545,"weight":9,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310868.jpeg?v=1517637896","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310869.jpeg?v=1517637896","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310870.jpeg?v=1517637896","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310871.jpeg?v=1517637896"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310868.jpeg?v=1517637896","options":["Title"],"media":[{"alt":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451 - MiniatureSweet","id":107502796849,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310868.jpeg?v=1517637896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310868.jpeg?v=1517637896","width":600},{"alt":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451 - MiniatureSweet","id":107502829617,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310869.jpeg?v=1517637896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310869.jpeg?v=1517637896","width":600},{"alt":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451 - MiniatureSweet","id":107502862385,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310870.jpeg?v=1517637896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310870.jpeg?v=1517637896","width":600},{"alt":"I Love Zoo Bear (20mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD451 - MiniatureSweet","id":107502895153,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310871.jpeg?v=1517637896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195310871.jpeg?v=1517637896","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.4cm (W) x 2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Ice Cream Cone Silicone Mold (2 Cavity) | Sweet Deco...
$3.99 USD
{"id":1942272409649,"title":"Ice Cream Cone Silicone Mold (2 Cavity) | Sweet Deco | Kawaii Decoden Cabochon DIY | Fake Dessert Jewelry Making (33mm x 60mm)","handle":"ice-cream-cone-silicone-mold-sweet-deco-kawaii-decoden-cabochon-diy-fake-dessert-jewelry-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eIce cream cone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin craft, decoden, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.3cm (W) x 6cm (L) \/ 1.3\" (W) x 2.36\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-04-18T23:57:52-11:00","created_at":"2019-04-17T15:50:25-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["cabochon mold","clear mold","decoden mold","dessert mold","epoxy resin","flexible mold","food mold","Ice Cream Cone","ice cream mold","kawaii mold","resin art","resin craft","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15222126641201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2225","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ice Cream Cone Silicone Mold (2 Cavity) | Sweet Deco | Kawaii Decoden Cabochon DIY | Fake Dessert Jewelry Making (33mm x 60mm)","public_title":null,"options":["Default Title"],"price":399,"weight":95,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_64d3cd2a-2799-4b2c-98f0-09de3db36cd8.jpg?v=1555620939","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_f0846ad9-0a5e-4e0f-ac75-d4fc5fe08eb7.jpg?v=1555620940"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_64d3cd2a-2799-4b2c-98f0-09de3db36cd8.jpg?v=1555620939","options":["Title"],"media":[{"alt":"Ice Cream Cone Silicone Mold (2 Cavity) | Sweet Deco | Kawaii Decoden Cabochon DIY | Fake Dessert Jewelry Making (33mm x 60mm) - MiniatureSweet","id":2809206145159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_64d3cd2a-2799-4b2c-98f0-09de3db36cd8.jpg?v=1555620939"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_64d3cd2a-2799-4b2c-98f0-09de3db36cd8.jpg?v=1555620939","width":600},{"alt":"Ice Cream Cone Silicone Mold (2 Cavity) | Sweet Deco | Kawaii Decoden Cabochon DIY | Fake Dessert Jewelry Making (33mm x 60mm) - MiniatureSweet","id":2809206177927,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_f0846ad9-0a5e-4e0f-ac75-d4fc5fe08eb7.jpg?v=1555620940"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_f0846ad9-0a5e-4e0f-ac75-d4fc5fe08eb7.jpg?v=1555620940","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eIce cream cone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin craft, decoden, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.3cm (W) x 6cm (L) \/ 1.3\" (W) x 2.36\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Ice Cream Scoop 18mm Flexible Silicone Mold Decoden ...
Sold Out
{"id":5530224577,"title":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277","handle":"ice-cream-scoop-18mm-flexible-silicone-mold-decoden-mold-kawaii-miniature-sweets-mold-fimo-polymer-clay-jewelry-cabochon-charms-wax-md277","description":"\u003cp\u003eIce Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 18mm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:42:00-11:00","created_at":"2016-03-26T01:42:25-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold","tags":["Cabochon","deco mold","decoden mold","dollhouse sweet mold","fake food mold","flexible mold","gelato mold","Handmade","ice cream mold","kawaii supplies","polymer clay mold","sculpey mold","silicone mold","sundae mold","Supplies","sweets mold"],"price":545,"price_min":545,"price_max":545,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943498497,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD277","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277","public_title":null,"options":["Default Title"],"price":545,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958144.jpeg?v=1517638040","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958145.jpeg?v=1517638040","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_7827b60f-e53c-46c9-be3b-ede77c734043.jpeg?v=1517638040","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_c27569c1-a081-4921-8c9f-29479025b6c1.jpeg?v=1517638040","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_9efb625c-4a05-4e36-a6c3-01d60cf86ae5.jpeg?v=1517638040"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958144.jpeg?v=1517638040","options":["Title"],"media":[{"alt":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277 - MiniatureSweet","id":107476942897,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958144.jpeg?v=1517638040"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958144.jpeg?v=1517638040","width":600},{"alt":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277 - MiniatureSweet","id":107476975665,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958145.jpeg?v=1517638040"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958145.jpeg?v=1517638040","width":600},{"alt":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277 - MiniatureSweet","id":107477008433,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_7827b60f-e53c-46c9-be3b-ede77c734043.jpeg?v=1517638040"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_7827b60f-e53c-46c9-be3b-ede77c734043.jpeg?v=1517638040","width":1218},{"alt":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277 - MiniatureSweet","id":107477041201,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_c27569c1-a081-4921-8c9f-29479025b6c1.jpeg?v=1517638040"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_c27569c1-a081-4921-8c9f-29479025b6c1.jpeg?v=1517638040","width":600},{"alt":"Ice Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax MD277 - MiniatureSweet","id":107477073969,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_9efb625c-4a05-4e36-a6c3-01d60cf86ae5.jpeg?v=1517638040"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_9efb625c-4a05-4e36-a6c3-01d60cf86ae5.jpeg?v=1517638040","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIce Cream Scoop 18mm Flexible Silicone Mold Decoden Mold Kawaii Miniature Sweets Mold Fimo Polymer Clay Jewelry Cabochon Charms Wax\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 18mm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mol...
Sold Out
{"id":5530224513,"title":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276","handle":"ice-cream-scoop-mold-17mm-flexible-mold-silicone-mold-decoden-mold-miniature-sweets-cell-phone-deco-mold-kawaii-jewelry-charms-mold-md276","description":"\u003cp\u003eIce Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.7cm (Diameter) x 0.9cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:42:00-11:00","created_at":"2016-03-26T01:42:22-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold","tags":["Cabochon","cell phone deco mold","decoden mold","fimo mold","flexible mold","Handmade","ice cream mold","ice cream scoop mold","kawaii jewelry mold","kitsch cabochon mold","miniature sweet mold","miniaturesweet","polymer clay mold","silicone mold","Supplies","sweets cabochon mold"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943498433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD276","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344217.jpeg?v=1517638006","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344221.jpeg?v=1517638006","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761.jpeg?v=1517638006","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146.jpeg?v=1517638006","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147.jpeg?v=1517638006"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344217.jpeg?v=1517638006","options":["Title"],"media":[{"alt":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276 - MiniatureSweet","id":107476779057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344217.jpeg?v=1517638006"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344217.jpeg?v=1517638006","width":600},{"alt":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276 - MiniatureSweet","id":107476811825,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344221.jpeg?v=1517638006"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340344221.jpeg?v=1517638006","width":600},{"alt":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276 - MiniatureSweet","id":107476844593,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761.jpeg?v=1517638006"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761.jpeg?v=1517638006","width":1218},{"alt":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276 - MiniatureSweet","id":107476877361,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146.jpeg?v=1517638006"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146.jpeg?v=1517638006","width":600},{"alt":"Ice Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Mold MD276 - MiniatureSweet","id":107476910129,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147.jpeg?v=1517638006"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147.jpeg?v=1517638006","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIce Cream Scoop Mold 17mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Charms Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.7cm (Diameter) x 0.9cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mol...
Sold Out
{"id":5530224833,"title":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281","handle":"ice-cream-scoop-mold-27mm-flexible-mold-silicone-mold-decoden-mini-sweets-cell-phone-deco-mold-kawaii-jewelry-cabochon-charms-mold-md281","description":"\u003cp\u003eIce Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.7cm (Diameter) x 1.3cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:42:00-11:00","created_at":"2016-03-26T01:42:35-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold","tags":["Cabochon","cell phone deco mold","decoden mold","fake food mold","fimo mold","flexible mold","Handmade","ice cream mold","ice cream scoop mold","kawaii jewelry mold","kitsch cabochon mold","miniature sweet mold","miniaturesweet","polymer clay mold","silicone mold","Supplies"],"price":575,"price_min":575,"price_max":575,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943498753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD281","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281","public_title":null,"options":["Default Title"],"price":575,"weight":16,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343345.jpeg?v=1517638057","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343363.jpeg?v=1517638057","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_543964ec-422b-49cf-aa73-67a6cd7ae899.jpeg?v=1517638057","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_26ce951d-75c2-4945-83ab-eac165ea480f.jpeg?v=1517638057","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_dc885314-d6e1-473d-9196-f590f75b6c80.jpeg?v=1517638057"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343345.jpeg?v=1517638057","options":["Title"],"media":[{"alt":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281 - MiniatureSweet","id":107477598257,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343345.jpeg?v=1517638057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343345.jpeg?v=1517638057","width":600},{"alt":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281 - MiniatureSweet","id":107477631025,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343363.jpeg?v=1517638057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.340343363.jpeg?v=1517638057","width":600},{"alt":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281 - MiniatureSweet","id":107477663793,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_543964ec-422b-49cf-aa73-67a6cd7ae899.jpeg?v=1517638057"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511761_543964ec-422b-49cf-aa73-67a6cd7ae899.jpeg?v=1517638057","width":1218},{"alt":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281 - MiniatureSweet","id":107477696561,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_26ce951d-75c2-4945-83ab-eac165ea480f.jpeg?v=1517638057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958146_26ce951d-75c2-4945-83ab-eac165ea480f.jpeg?v=1517638057","width":600},{"alt":"Ice Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mini Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold MD281 - MiniatureSweet","id":107477729329,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_dc885314-d6e1-473d-9196-f590f75b6c80.jpeg?v=1517638057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186958147_dc885314-d6e1-473d-9196-f590f75b6c80.jpeg?v=1517638057","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIce Cream Scoop Mold 27mm Flexible Mold Silicone Mold Decoden Mold Miniature Sweets Cell Phone Deco Mold Kawaii Jewelry Cabochon Charms Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.7cm (Diameter) x 1.3cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Ice Cream Sundae with Cone (17mm) Flexible Mold Sili...
Sold Out
{"id":5530225793,"title":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292","handle":"ice-cream-sundae-with-cone-17mm-flexible-mold-silicone-mold-miniature-food-sweets-charms-clay-fimo-resin-gum-paste-fondant-md292","description":"\u003cp\u003e★Measurement: Approx. 1.1cm (W) x 1.7cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:43:00-11:00","created_at":"2016-03-26T01:43:02-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold","tags":["bead mold","cabochon mold","cell phone deco mold","deco den mold","decoden mold","dollhouse food mold","fast food mold","flexible mold","Handmade","ice cream mold","kawaii mold","kitsch mold","polymer clay mold","Scrapbooking","silicone mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943499777,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD292","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895952.jpeg?v=1517638077","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895976.jpeg?v=1517638077","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960361.jpeg?v=1517638077","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910991.jpeg?v=1517638077","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910993.jpeg?v=1517638077"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895952.jpeg?v=1517638077","options":["Title"],"media":[{"alt":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292 - MiniatureSweet","id":107479367729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895952.jpeg?v=1517638077"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895952.jpeg?v=1517638077","width":600},{"alt":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292 - MiniatureSweet","id":107479400497,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895976.jpeg?v=1517638077"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237895976.jpeg?v=1517638077","width":600},{"alt":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292 - MiniatureSweet","id":107479433265,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960361.jpeg?v=1517638077"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960361.jpeg?v=1517638077","width":1218},{"alt":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292 - MiniatureSweet","id":107479466033,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910991.jpeg?v=1517638077"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910991.jpeg?v=1517638077","width":600},{"alt":"Ice Cream Sundae with Cone (17mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD292 - MiniatureSweet","id":107479498801,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910993.jpeg?v=1517638077"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237910993.jpeg?v=1517638077","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.1cm (W) x 1.7cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Insect / Fly (12mm) Silicone Flexible Push Mold - Mi...
$4.25 USD
{"id":5530241217,"title":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415","handle":"insect-fly-12mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-epoxy-gum-paste-fondant-md415","description":"\u003cp\u003e★Measurement: approx. 1.2cm (W) x 1cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:48:00-11:00","created_at":"2016-03-26T01:48:58-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["animal mold","beads mold","butterfly mold","cabochon mold","cupcake topper mold","deco mold","decoden mold","dragonfly mold","Handmade","kawaii mold","kitsch mold","Polymer Clay","polymer clay mold","sculpey mold","stud mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943546881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD415","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415","public_title":null,"options":["Default Title"],"price":425,"weight":7,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696047.jpeg?v=1517638257","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696010.jpeg?v=1517638257","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696139.jpeg?v=1517638257","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696197.jpeg?v=1517638257"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696047.jpeg?v=1517638257","options":["Title"],"media":[{"alt":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415 - MiniatureSweet","id":107498012721,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696047.jpeg?v=1517638257"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696047.jpeg?v=1517638257","width":600},{"alt":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415 - MiniatureSweet","id":107498045489,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696010.jpeg?v=1517638257"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696010.jpeg?v=1517638257","width":600},{"alt":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415 - MiniatureSweet","id":107498078257,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696139.jpeg?v=1517638257"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696139.jpeg?v=1517638257","width":600},{"alt":"Insect \/ Fly (12mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Epoxy Gum Paste Fondant) MD415 - MiniatureSweet","id":107498111025,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696197.jpeg?v=1517638257"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.187696197.jpeg?v=1517638257","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.2cm (W) x 1cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Japanese Candy Silicone Mold Assortment (6 Cavity) |...
$1.79 USD
{"id":4189598810247,"title":"Japanese Candy Silicone Mold Assortment (6 Cavity) | Sweet Deco | Kawaii Decoden | Fake Food DIY | Resin Craft Supplies","handle":"japanese-candy-silicone-mold-assortment-sweet-deco-kawaii-decoden-fake-food-diy-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Japanese candy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right, top to bottom):\u003c\/p\u003e\n\u003cp\u003e- approx. 1.3cm (W) x 1.5cm (L) \/ 0.51\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.2cm (W) x 1.5cm (L) \/ 0.47\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.3cm (L) \/ 0.43\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.4cm (L) \/ 0.43\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.4cm (L) \/ 0.43\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.5cm or 0.59\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-11-04T14:58:46-11:00","created_at":"2019-10-08T20:10:43-11:00","vendor":"MiniatureSweet","type":"Candy Mold, Mold Mix","tags":["cabochon mold","candy mold","Clear Mold","decoden mold","epoxy resin","fake food mold","faux food mold","flexible mold","japanese candies","kawaii mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30467676012679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2017A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Japanese Candy Silicone Mold Assortment (6 Cavity) | Sweet Deco | Kawaii Decoden | Fake Food DIY | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":179,"weight":8,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016_e2930133-d4fd-454a-a3e9-7c4d0af88ede.jpg?v=1570625865","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-02_fee92259-7265-46ff-bd7e-eb01e0c23043.jpg?v=1570625865","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-03_25d80e40-7e51-45a3-a9fb-0e29e61e7a3f.jpg?v=1570625866"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016_e2930133-d4fd-454a-a3e9-7c4d0af88ede.jpg?v=1570625865","options":["Title"],"media":[{"alt":"Japanese Candy Silicone Mold Assortment (6 Cavity) | Sweet Deco | Kawaii Decoden | Fake Food DIY | Resin Craft Supplies - MiniatureSweet","id":4861885186183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016_e2930133-d4fd-454a-a3e9-7c4d0af88ede.jpg?v=1570625865"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016_e2930133-d4fd-454a-a3e9-7c4d0af88ede.jpg?v=1570625865","width":600},{"alt":"Japanese Candy Silicone Mold Assortment (6 Cavity) | Sweet Deco | Kawaii Decoden | Fake Food DIY | Resin Craft Supplies - MiniatureSweet","id":4861884334215,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-02_fee92259-7265-46ff-bd7e-eb01e0c23043.jpg?v=1570625865"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-02_fee92259-7265-46ff-bd7e-eb01e0c23043.jpg?v=1570625865","width":600},{"alt":"Japanese Candy Silicone Mold Assortment (6 Cavity) | Sweet Deco | Kawaii Decoden | Fake Food DIY | Resin Craft Supplies - MiniatureSweet","id":4861884629127,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-03_25d80e40-7e51-45a3-a9fb-0e29e61e7a3f.jpg?v=1570625866"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/016-03_25d80e40-7e51-45a3-a9fb-0e29e61e7a3f.jpg?v=1570625866","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Japanese candy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right, top to bottom):\u003c\/p\u003e\n\u003cp\u003e- approx. 1.3cm (W) x 1.5cm (L) \/ 0.51\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.2cm (W) x 1.5cm (L) \/ 0.47\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.3cm (L) \/ 0.43\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.4cm (L) \/ 0.43\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.1cm (W) x 1.4cm (L) \/ 0.43\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- approx. 1.5cm or 0.59\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii Animal Soft Mold (3 Cavity) | Pegasus Silicon...
Sold Out
{"id":792118263857,"title":"Kawaii Animal Soft Mold (3 Cavity) | Pegasus Silicone Mould | Flying Horse Mold | Kitty Cat Mold | Bird Mold | UV Resin Mold","handle":"kawaii-animal-soft-mold-3-cavity-pegasus-silicone-mould-flying-horse-mold-kitty-cat-mold-bird-mold-uv-resin-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of pegasus, kitty cat and bird. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003ePegasus: approx. 4cm (W) x 4cm (L) \/ 1.57\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKitty cat: approx. 2.2cm (W) x 2.9cm (L) \/ 0.87\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003eBird: approx. 3cm (W) x 2.3cm (L) \/ 1.18\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T17:03:13-11:00","created_at":"2018-07-03T16:40:24-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Mold Mix","tags":["animal mold","bird mold","cabochon mold","cat mold","Clear Mold","decoden mold","dove mold","epoxy resin","flexible mold","flying horse mold","kawaii mold","kitten mold","kitty mold","Pegasus mold","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold","uv resin","winged horse mold"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8934377029681,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1198","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Animal Soft Mold (3 Cavity) | Pegasus Silicone Mould | Flying Horse Mold | Kitty Cat Mold | Bird Mold | UV Resin Mold","public_title":null,"options":["Default Title"],"price":399,"weight":31,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_a0af3961-b9b2-49d9-b75a-12bfda51cfed.jpg?v=1530695593"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_a0af3961-b9b2-49d9-b75a-12bfda51cfed.jpg?v=1530695593","options":["Title"],"media":[{"alt":"Kawaii Animal Soft Mold (3 Cavity) | Pegasus Silicone Mould | Flying Horse Mold | Kitty Cat Mold | Bird Mold | UV Resin Mold - MiniatureSweet","id":2596219977863,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_a0af3961-b9b2-49d9-b75a-12bfda51cfed.jpg?v=1530695593"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_a0af3961-b9b2-49d9-b75a-12bfda51cfed.jpg?v=1530695593","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of pegasus, kitty cat and bird. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003ePegasus: approx. 4cm (W) x 4cm (L) \/ 1.57\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKitty cat: approx. 2.2cm (W) x 2.9cm (L) \/ 0.87\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003eBird: approx. 3cm (W) x 2.3cm (L) \/ 1.18\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii Bat Silicone Mold | Halloween Decoden Mold | ...
$1.79 USD
{"id":541036150833,"title":"Kawaii Bat Silicone Mold | Halloween Decoden Mold | Creepy Cute Cabochon DIY | Clear Soft Mold for UV Resin (46mm x 20mm)","handle":"kawaii-bat-silicone-mold-halloween-decoden-mold-creepy-cute-cabochon-diy-clear-soft-mold-for-uv-resin","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible bat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.6cm (W) x 2cm (L) \/ 1.81\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-03-11T21:20:00-11:00","created_at":"2018-03-11T21:50:21-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","Bat Mold","cabochon mold","Clear Mold","creepy cute","decoden mold","flexible mold","halloween mold","Kawaii Goth","resin mold","resin mould","Silicone Mold","soft mold","spooky"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276004737073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD202A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Bat Silicone Mold | Halloween Decoden Mold | Creepy Cute Cabochon DIY | Clear Soft Mold for UV Resin (46mm x 20mm)","public_title":null,"options":["Default Title"],"price":179,"weight":9,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD202A.jpg?v=1520938035"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD202A.jpg?v=1520938035","options":["Title"],"media":[{"alt":"Kawaii Bat Silicone Mold | Halloween Decoden Mold | Creepy Cute Cabochon DIY | Clear Soft Mold for UV Resin (46mm x 20mm) - MiniatureSweet","id":2520243568775,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD202A.jpg?v=1520938035"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD202A.jpg?v=1520938035","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible bat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.6cm (W) x 2cm (L) \/ 1.81\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii Bear Mold | Decoden Mold | UV Resin Mould | F...
$3.99 USD
{"id":8946816385,"title":"Kawaii Bear Mold | Decoden Mold | UV Resin Mould | Flexible Epoxy Resin Mold | Clear Silicone Mold | Animal Cabochon Mold (34mm x 56mm)","handle":"kawaii-bear-mold-decoden-mold-uv-resin-mould-flexible-epoxy-resin-mold-clear-silicone-mold-animal-cabochon-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii bear silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 5.6cm (L) \/ 1.34\" (W) x 2.2\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-03-03T02:37:45-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bear mold","cabochon mold","clear mould","Decoden Mold","epoxy resin","Flexible Mold","kawaii mold","resin art","resin crafts","resin mold","Silicone Mold","UV Resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31462873857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1062","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Bear Mold | Decoden Mold | UV Resin Mould | Flexible Epoxy Resin Mold | Clear Silicone Mold | Animal Cabochon Mold (34mm x 56mm)","public_title":null,"options":["Default Title"],"price":399,"weight":20,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1062.jpg?v=1517667853"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1062.jpg?v=1517667853","options":["Title"],"media":[{"alt":"Kawaii Bear Mold | Decoden Mold | UV Resin Mould | Flexible Epoxy Resin Mold | Clear Silicone Mold | Animal Cabochon Mold (34mm x 56mm) - MiniatureSweet","id":242430181425,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1062.jpg?v=1517667853"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1062.jpg?v=1517667853","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii bear silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 5.6cm (L) \/ 1.34\" (W) x 2.2\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Candy Assortment Silicone Mold (6 Cavity) | F...
$9.99 USD
{"id":10348510721,"title":"Kawaii Candy Assortment Silicone Mold (6 Cavity) | Faux Candy DIY | Sweets Decoden | UV Resin Art Supplies (13mm to 15mm)","handle":"kawaii-candy-assortment-silicone-mold-6-cavity-faux-candy-diy-sweets-decoden-uv-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted candy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.3cm to 1.5cm (L) \/ 0.51\" to 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T03:07:15-11:00","vendor":"MiniatureSweet","type":"Candy Mold, Mold Mix","tags":["cabochon mold","candy mold","Clear Mold","decoden mold","epoxy resin","fake food mold","faux food mold","flexible mold","japanese candies","kawaii mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38683045825,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD093A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Candy Assortment Silicone Mold (6 Cavity) | Faux Candy DIY | Sweets Decoden | UV Resin Art Supplies (13mm to 15mm)","public_title":null,"options":["Default Title"],"price":999,"weight":14,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD093A.jpg?v=1517671534"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD093A.jpg?v=1517671534","options":["Title"],"media":[{"alt":"Kawaii Candy Assortment Silicone Mold (6 Cavity) | Faux Candy DIY | Sweets Decoden | UV Resin Art Supplies (13mm to 15mm) - MiniatureSweet","id":423171981361,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD093A.jpg?v=1517671534"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD093A.jpg?v=1517671534","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted candy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.3cm to 1.5cm (L) \/ 0.51\" to 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii Crown Charm Silicone Mold | Epoxy Resin Craft...
$1.29 USD
{"id":8595957697,"title":"Kawaii Crown Charm Silicone Mold | Epoxy Resin Craft Supplies | Decoden Cabochon Mold | Flexible Resin Jewelry Mold | Clear Mould (30mm x 16mm)","handle":"kawaii-crown-charm-silicone-mold-epoxy-resin-craft-supplies-decoden-cabochon-mold-flexible-resin-jewelry-mold-clear-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eThe finished piece comes with a hole and can be used as charm \/ pendant.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 1.6cm (L) \/ 1.18\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-18T18:08:00-11:00","created_at":"2016-12-27T21:21:59-11:00","vendor":"MiniatureSweet","type":"Crown Mold","tags":["Cabochon Mold","clear mould","Crown Charm","Decoden Cabochon","Decoden Mold","Epoxy Resin Craft","flexible mold","Jewelry Mold","Kawaii Charm","Kawaii Crown","kawaii resin mold","resin jewelry","silicone mold"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29036887873,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1022","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Crown Charm Silicone Mold | Epoxy Resin Craft Supplies | Decoden Cabochon Mold | Flexible Resin Jewelry Mold | Clear Mould (30mm x 16mm)","public_title":null,"options":["Default Title"],"price":129,"weight":4,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1022.jpg?v=1517666301"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1022.jpg?v=1517666301","options":["Title"],"media":[{"alt":"Kawaii Crown Charm Silicone Mold | Epoxy Resin Craft Supplies | Decoden Cabochon Mold | Flexible Resin Jewelry Mold | Clear Mould (30mm x 16mm) - MiniatureSweet","id":214679552049,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1022.jpg?v=1517666301"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1022.jpg?v=1517666301","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eThe finished piece comes with a hole and can be used as charm \/ pendant.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 1.6cm (L) \/ 1.18\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}