Products
Ribbon / Bow with Heart (25mm) Silicone Flexible Pus...
Sold Out
{"id":5530315841,"title":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785","handle":"ribbon-bow-with-heart-25mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-epoxy-fondant-gum-paste-md785","description":"\u003cp\u003e★Measurement: Approx. 2.5cm (W) x 2.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:02:00-11:00","created_at":"2016-03-26T02:02:37-11:00","vendor":"MiniatureSweet","type":"Ribbon Mold","tags":["cabochon mold","cell phone deco mold","cute mold","deco mold","decoden mold","decoration mold","embellishment mold","Handmade","kawaii mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","soap mold","Supplies","wax mold"],"price":575,"price_min":575,"price_max":575,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943867329,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD785","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785","public_title":null,"options":["Default Title"],"price":575,"weight":11,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171717.jpeg?v=1517648403","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171718.jpeg?v=1517648403","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171719_cd5c13e7-5c04-41a4-b094-d1332d970c52.jpeg?v=1517648403","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171720_3060e775-21e4-40af-b287-6c655066a727.jpeg?v=1517648403"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171717.jpeg?v=1517648403","options":["Title"],"media":[{"alt":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785 - MiniatureSweet","id":107548835889,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171717.jpeg?v=1517648403"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171717.jpeg?v=1517648403","width":600},{"alt":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785 - MiniatureSweet","id":107548868657,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171718.jpeg?v=1517648403"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171718.jpeg?v=1517648403","width":600},{"alt":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785 - MiniatureSweet","id":107548901425,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171719_cd5c13e7-5c04-41a4-b094-d1332d970c52.jpeg?v=1517648403"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171719_cd5c13e7-5c04-41a4-b094-d1332d970c52.jpeg?v=1517648403","width":600},{"alt":"Ribbon \/ Bow with Heart (25mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay Fimo Casting Resin Epoxy Fondant Gum Paste) MD785 - MiniatureSweet","id":107548934193,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171720_3060e775-21e4-40af-b287-6c655066a727.jpeg?v=1517648403"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.161171720_3060e775-21e4-40af-b287-6c655066a727.jpeg?v=1517648403","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.5cm (W) x 2.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Ribbon and Bow Assortment Silicone Mold (8 Cavity) |...
$1.99 USD
{"id":10348272385,"title":"Ribbon and Bow Assortment Silicone Mold (8 Cavity) | Kawaii Cabochon Mold | Epoxy Resin Mold | Clear UV Resin Soft Mould (14mm to 44mm)","handle":"ribbon-and-bow-assortment-silicone-mold-8-cavity-kawaii-cabochon-mold-epoxy-resin-mold-clear-uv-resin-soft-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted ribbon and bow silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.4cm to 4.4cm (W) \/ 0.55\" to 1.73\" (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T01:44:54-11:00","vendor":"MiniatureSweet","type":"Ribbon Mold, Bow Mold, Mold Mix","tags":["bow mold","cabochon mold","Clear Mold","decoden mold","epoxy resin","flexible mold","kawaii mold","resin art","resin craft","resin mold","resin mould","ribbon mold","silicone mold","soft mold","UV resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38682736769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD070A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ribbon and Bow Assortment Silicone Mold (8 Cavity) | Kawaii Cabochon Mold | Epoxy Resin Mold | Clear UV Resin Soft Mould (14mm to 44mm)","public_title":null,"options":["Default Title"],"price":199,"weight":46,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A.jpg?v=1517671524","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A-02.jpg?v=1517671524"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A.jpg?v=1517671524","options":["Title"],"media":[{"alt":"Ribbon and Bow Assortment Silicone Mold (8 Cavity) | Kawaii Cabochon Mold | Epoxy Resin Mold | Clear UV Resin Soft Mould (14mm to 44mm) - MiniatureSweet","id":423127842865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A.jpg?v=1517671524"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A.jpg?v=1517671524","width":600},{"alt":"Ribbon and Bow Assortment Silicone Mold (8 Cavity) | Kawaii Cabochon Mold | Epoxy Resin Mold | Clear UV Resin Soft Mould (14mm to 44mm) - MiniatureSweet","id":423127875633,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A-02.jpg?v=1517671524"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD070A-02.jpg?v=1517671524","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted ribbon and bow silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.4cm to 4.4cm (W) \/ 0.55\" to 1.73\" (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Ribbon and Happy Face Star Flexible Mold (2 Cavity) ...
$1.99 USD
{"id":9756683265,"title":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies","handle":"ribbon-and-happy-face-star-flexible-mold-2-cavity-epoxy-resin-silicone-mold-kawaii-resin-cabochon-mold-decoden-supplies","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute ribbon and happy face star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.6cm (W) x 1.9cm (L) \/ 1.02\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.3cm (W) x 1.3cm (L) \/ 0.51\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:19:04-11:00","vendor":"MiniatureSweet","type":"Ribbon Mold, Star Mold, Mold Mix","tags":["bow mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","happy face","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","ribbon mold","Silicone Mold","star mold","UV resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36000670913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1129","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies","public_title":null,"options":["Default Title"],"price":199,"weight":16,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964","options":["Title"],"media":[{"alt":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies - MiniatureSweet","id":327828996145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute ribbon and happy face star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.6cm (W) x 1.9cm (L) \/ 1.02\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.3cm (W) x 1.3cm (L) \/ 0.51\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Rocking Horse Resin Shaker Cabochon Silicone Mold | ...
$0.99 USD
{"id":4166234046599,"title":"Rocking Horse Resin Shaker Cabochon Silicone Mold | Kawaii Shaker Charm DIY | Soft Clear Mold for UV Resin Craft (65mm x 50mm)","handle":"rocking-horse-resin-shaker-cabochon-silicone-mold-kawaii-shaker-charm-diy-soft-clear-mold-for-uv-resin-craft","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in rocking horse shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 6.5cm (W) x 5cm (L) \/ 2.56\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-10T17:39:53-11:00","created_at":"2019-09-28T21:21:24-11:00","vendor":"MiniatureSweet","type":"Baby Mold, Fairytale Mold, Animal Mold, Shaker Mold","tags":["animal mold","baby mold","bezel mold","cabochon mold","cell phone decoration","decoden supplies","epoxy resin","fairy kei","fairy tale","fairytale","flexible mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","rocking horse mold","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30285670121607,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2210A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rocking Horse Resin Shaker Cabochon Silicone Mold | Kawaii Shaker Charm DIY | Soft Clear Mold for UV Resin Craft (65mm x 50mm)","public_title":null,"options":["Default Title"],"price":99,"weight":11,"compare_at_price":null,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f748b36b-63b3-4e2d-9a28-7ea60aaddeeb.jpg?v=1569836270","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_ebdc1b9e-bee4-4351-95d2-06dbb86c902e.jpg?v=1569836271"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f748b36b-63b3-4e2d-9a28-7ea60aaddeeb.jpg?v=1569836270","options":["Title"],"media":[{"alt":"Rocking Horse Resin Shaker Cabochon Silicone Mold | Kawaii Shaker Charm DIY | Soft Clear Mold for UV Resin Craft (65mm x 50mm) - MiniatureSweet","id":2355322716295,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f748b36b-63b3-4e2d-9a28-7ea60aaddeeb.jpg?v=1569836270"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_f748b36b-63b3-4e2d-9a28-7ea60aaddeeb.jpg?v=1569836270","width":600},{"alt":"Rocking Horse Resin Shaker Cabochon Silicone Mold | Kawaii Shaker Charm DIY | Soft Clear Mold for UV Resin Craft (65mm x 50mm) - MiniatureSweet","id":2355322519687,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_ebdc1b9e-bee4-4351-95d2-06dbb86c902e.jpg?v=1569836271"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_ebdc1b9e-bee4-4351-95d2-06dbb86c902e.jpg?v=1569836271","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in rocking horse shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 6.5cm (W) x 5cm (L) \/ 2.56\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Rocking Horse with Wing Mould | Flying Unicorn Rocke...
$1.39 USD
{"id":8532205505,"title":"Rocking Horse with Wing Mould | Flying Unicorn Rocker Flexible Mold | Kawaii Crafts | Fairy Kei Decoden Mold | Magical Girl Resin Jewellery Mold (31mm x 25mm)","handle":"rocking-horse-with-wing-mould-flying-unicorn-rocker-flexible-mold-kawaii-crafts-fairy-kei-decoden-mold-magical-girl-resin-jewellery-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible rocking unicorn silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, decoden cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.1cm (W) x 2.5cm (L) \/ 1.22\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-11T22:46:00-11:00","created_at":"2016-12-11T22:38:10-11:00","vendor":"MiniatureSweet","type":"Baby Mold, Fairytale Mold, Animal Mold","tags":["cabochon mold","decoden mold","flexible mold","Flying Unicorn","Horse with Wing","Kawaii Craft","Magical Girl","Resin Mold","Rocking Horse Mold","silicone mold","Unicorn Mold","Unicorn Rocker","Winged Unicorn"],"price":139,"price_min":139,"price_max":139,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28807425921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD959","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rocking Horse with Wing Mould | Flying Unicorn Rocker Flexible Mold | Kawaii Crafts | Fairy Kei Decoden Mold | Magical Girl Resin Jewellery Mold (31mm x 25mm)","public_title":null,"options":["Default Title"],"price":139,"weight":8,"compare_at_price":null,"inventory_quantity":81,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD959_NEW.jpg?v=1530606730"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD959_NEW.jpg?v=1530606730","options":["Title"],"media":[{"alt":"Rocking Horse with Wing Mould | Flying Unicorn Rocker Flexible Mold | Kawaii Crafts | Fairy Kei Decoden Mold | Magical Girl Resin Jewellery Mold (31mm x 25mm) - MiniatureSweet","id":2596159651975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD959_NEW.jpg?v=1530606730"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD959_NEW.jpg?v=1530606730","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible rocking unicorn silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, decoden cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.1cm (W) x 2.5cm (L) \/ 1.22\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Rose / Flower (12mm) Silicone Flexible Push Mold - J...
Sold Out
{"id":5530264065,"title":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562","handle":"rose-flower-12mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-wax-soap-gum-paste-fondant-md562","description":"\u003cp\u003e★Measurement: Approx. 1.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:54:00-11:00","created_at":"2016-03-26T01:54:17-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["cabochon mold","cell phone deco mold","deco mold","decoden mold","embellishment mold","floral mold","flower mold","Handmade","kawaii mold","polymer clay mold","premo mold","resin mold","Scrapbooking","sculpey mold","spring mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943621889,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD562","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995838.jpeg?v=1517648906","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995839.jpeg?v=1517648906","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840.jpeg?v=1517648906","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841.jpeg?v=1517648906"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995838.jpeg?v=1517648906","options":["Title"],"media":[{"alt":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562 - MiniatureSweet","id":107517673521,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995838.jpeg?v=1517648906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995838.jpeg?v=1517648906","width":600},{"alt":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562 - MiniatureSweet","id":107517706289,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995839.jpeg?v=1517648906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995839.jpeg?v=1517648906","width":600},{"alt":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562 - MiniatureSweet","id":107517739057,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840.jpeg?v=1517648906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840.jpeg?v=1517648906","width":600},{"alt":"Rose \/ Flower (12mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD562 - MiniatureSweet","id":107517771825,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841.jpeg?v=1517648906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841.jpeg?v=1517648906","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Rose / Flower (16mm) Silicone Flexible Push Mold - J...
Sold Out
{"id":5530313153,"title":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773","handle":"rose-flower-16mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-wax-soap-gum-paste-fondant-md773","description":"\u003cp\u003e★Measurement: Approx. 1.6 (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:02:00-11:00","created_at":"2016-03-26T02:02:15-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["cabochon mold","cell phone deco mold","deco mold","decoden supplies","embellishment","floral mold","flower mold","Handmade","kawaii mold","polymer clay mold","premo mold","resin mold","Scrapbooking","sculpey mold","Supplies"],"price":475,"price_min":475,"price_max":475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943849601,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD773","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773","public_title":null,"options":["Default Title"],"price":475,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578741.jpeg?v=1517648912","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578737.jpeg?v=1517648912","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840_cc462dd7-3c8c-48fc-b4f1-6c418c3e5999.jpeg?v=1517648912","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841_d7b0b270-234d-486a-a361-35abb082a5b4.jpeg?v=1517648912"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578741.jpeg?v=1517648912","options":["Title"],"media":[{"alt":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773 - MiniatureSweet","id":107547328561,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578741.jpeg?v=1517648912"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578741.jpeg?v=1517648912","width":600},{"alt":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773 - MiniatureSweet","id":107547361329,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578737.jpeg?v=1517648912"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252578737.jpeg?v=1517648912","width":600},{"alt":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773 - MiniatureSweet","id":107547394097,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840_cc462dd7-3c8c-48fc-b4f1-6c418c3e5999.jpeg?v=1517648912"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995840_cc462dd7-3c8c-48fc-b4f1-6c418c3e5999.jpeg?v=1517648912","width":600},{"alt":"Rose \/ Flower (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resin, Wax, Soap, Gum Paste, Fondant) MD773 - MiniatureSweet","id":107547426865,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841_d7b0b270-234d-486a-a361-35abb082a5b4.jpeg?v=1517648912"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190995841_d7b0b270-234d-486a-a361-35abb082a5b4.jpeg?v=1517648912","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6 (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Rose Flower with Leaf 16mm Silicone Flexible Push Mo...
Sold Out
{"id":5530313345,"title":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774","handle":"rose-flower-with-leaf-16mm-silicone-flexible-push-mold-jewelry-charms-cupcake-resin-clay-fimo-epoxy-wax-gum-paste-fondant-md774","description":"\u003cp\u003e★Measurement: approx. 1.6cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:02:00-11:00","created_at":"2016-03-26T02:02:17-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["Cabochon","cabochon mold","deco mold","decoden mold","decoration","elegant deco mold","embellishment","floral deco mold","Handmade","kawaii mold","polymer clay mold","premo mold","sculpey mold","spring mold","Supplies"],"price":475,"price_min":475,"price_max":475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943850753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD774","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774","public_title":null,"options":["Default Title"],"price":475,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252537496.jpeg?v=1517649019","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579101.jpeg?v=1517649019","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520_cc70bf86-90a0-4aa8-98f3-7a841b95e670.jpeg?v=1517649019","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521_b1fbaa88-d825-453c-86b8-163cdcf89b8b.jpeg?v=1517649019"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252537496.jpeg?v=1517649019","options":["Title"],"media":[{"alt":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774 - MiniatureSweet","id":107547459633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252537496.jpeg?v=1517649019"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252537496.jpeg?v=1517649019","width":600},{"alt":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774 - MiniatureSweet","id":107547492401,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579101.jpeg?v=1517649019"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252579101.jpeg?v=1517649019","width":600},{"alt":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774 - MiniatureSweet","id":107547525169,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520_cc70bf86-90a0-4aa8-98f3-7a841b95e670.jpeg?v=1517649019"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520_cc70bf86-90a0-4aa8-98f3-7a841b95e670.jpeg?v=1517649019","width":600},{"alt":"Rose Flower with Leaf 16mm Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Clay, Fimo, Epoxy, Wax, Gum Paste, Fondant) MD774 - MiniatureSweet","id":107547557937,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521_b1fbaa88-d825-453c-86b8-163cdcf89b8b.jpeg?v=1517649019"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521_b1fbaa88-d825-453c-86b8-163cdcf89b8b.jpeg?v=1517649019","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.6cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Rose Heart Frame Silicone Mold | Floral Heart Border...
$3.99 USD
{"id":770085191729,"title":"Rose Heart Frame Silicone Mold | Floral Heart Border Mold | Epoxy Resin Mould | Wedding Embellishment Mold (55mm x 56mm)","handle":"rose-heart-frame-silicone-mold-floral-heart-border-mold-epoxy-resin-mould-wedding-embellishment-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRose flower heart border silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5.5cm (W) x 5.6cm (L) \/ 2.17\" (W) x 2.2\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:36-11:00","created_at":"2018-05-14T17:46:36-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Heart Mold","tags":["cabochon mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","floral","flower","heart border","heart frame","heart mold","love","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","rose","silicone mold","soft mold","UV resin","valentine's day","wedding"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8698449887281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1165","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rose Heart Frame Silicone Mold | Floral Heart Border Mold | Epoxy Resin Mould | Wedding Embellishment Mold (55mm x 56mm)","public_title":null,"options":["Default Title"],"price":399,"weight":62,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_0e3adcfa-ab0b-475d-aea7-929f4684f123.jpg?v=1526368576"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_0e3adcfa-ab0b-475d-aea7-929f4684f123.jpg?v=1526368576","options":["Title"],"media":[{"alt":"Rose Heart Frame Silicone Mold | Floral Heart Border Mold | Epoxy Resin Mould | Wedding Embellishment Mold (55mm x 56mm) - MiniatureSweet","id":2590065459335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_0e3adcfa-ab0b-475d-aea7-929f4684f123.jpg?v=1526368576"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_0e3adcfa-ab0b-475d-aea7-929f4684f123.jpg?v=1526368576","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRose flower heart border silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5.5cm (W) x 5.6cm (L) \/ 2.17\" (W) x 2.2\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Rose with Leaf (17mm) Silicone Flexible Push Mold - ...
Sold Out
{"id":5530291841,"title":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692","handle":"rose-with-leaf-17mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resin-epoxy-wax-fondant-gum-paste-md692","description":"\u003cp\u003e★Measurement: approx. 1.7cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:59:00-11:00","created_at":"2016-03-26T01:59:14-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["beads mold","cabochon mold","deco mold","decoden mold","decoration mold","elegant mold","embellishment mold","floral mold","Handmade","kawaii mold","Polymer Clay","polymer clay mold","premo mold","sculpey mold","Supplies","topper mold"],"price":499,"price_min":499,"price_max":499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943740481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD692","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692","public_title":null,"options":["Default Title"],"price":499,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251518.jpeg?v=1517649085","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251519.jpeg?v=1517649085","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520.jpeg?v=1517649085","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521.jpeg?v=1517649085"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251518.jpeg?v=1517649085","options":["Title"],"media":[{"alt":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692 - MiniatureSweet","id":107535401009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251518.jpeg?v=1517649085"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251518.jpeg?v=1517649085","width":600},{"alt":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692 - MiniatureSweet","id":107535433777,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251519.jpeg?v=1517649085"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251519.jpeg?v=1517649085","width":600},{"alt":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692 - MiniatureSweet","id":107535466545,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520.jpeg?v=1517649085"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251520.jpeg?v=1517649085","width":600},{"alt":"Rose with Leaf (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Casting Resin Epoxy Wax Fondant Gum Paste) MD692 - MiniatureSweet","id":107535499313,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521.jpeg?v=1517649085"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.169251521.jpeg?v=1517649085","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.7cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Biscuit Mold 16mm Flexible Silicone Mold Dollh...
Sold Out
{"id":5530211969,"title":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142","handle":"round-biscuit-mold-16mm-flexible-silicone-mold-dollhouse-miniature-sweets-kawaii-decoden-kitsch-jewelry-charms-polymer-clay-push-mold-md142","description":"\u003cp\u003eRound Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Fimo Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.6cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:36:00-11:00","created_at":"2016-03-26T01:36:13-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["biscuit mold","cabochon mold","cell phone deco mold","cookie mold","dollhouse food mold","fake mini food mold","fimo biscuit mold","flexible mold","Handmade","kawaii mini mold","kitsch jewelry mold","miniature sweet mold","Polymer Clay","polymer clay mold","silicone mold","Supplies"],"price":455,"price_min":455,"price_max":455,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943480385,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD142","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142","public_title":null,"options":["Default Title"],"price":455,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302516491.jpeg?v=1517649116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302653818.jpeg?v=1517649116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_1c1b8c1c-b5a4-4cb6-9642-e3e2cc00559a.jpeg?v=1517649116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_fc199266-0268-4dc3-bce2-73b06be25a2a.jpeg?v=1517649116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_de7a8a6d-c64b-4e85-ab03-dabc8069525c.jpeg?v=1517649116"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302516491.jpeg?v=1517649116","options":["Title"],"media":[{"alt":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142 - MiniatureSweet","id":107454758961,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302516491.jpeg?v=1517649116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302516491.jpeg?v=1517649116","width":600},{"alt":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142 - MiniatureSweet","id":107454791729,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302653818.jpeg?v=1517649116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.302653818.jpeg?v=1517649116","width":600},{"alt":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142 - MiniatureSweet","id":107454824497,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_1c1b8c1c-b5a4-4cb6-9642-e3e2cc00559a.jpeg?v=1517649116"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_1c1b8c1c-b5a4-4cb6-9642-e3e2cc00559a.jpeg?v=1517649116","width":1218},{"alt":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142 - MiniatureSweet","id":107454857265,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_fc199266-0268-4dc3-bce2-73b06be25a2a.jpeg?v=1517649116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_fc199266-0268-4dc3-bce2-73b06be25a2a.jpeg?v=1517649116","width":600},{"alt":"Round Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Push Mold MD142 - MiniatureSweet","id":107454890033,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_de7a8a6d-c64b-4e85-ab03-dabc8069525c.jpeg?v=1517649116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_de7a8a6d-c64b-4e85-ab03-dabc8069525c.jpeg?v=1517649116","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eRound Biscuit Mold 16mm Flexible Silicone Mold Dollhouse Miniature Sweets Kawaii Decoden Kitsch Jewelry Charms Polymer Clay Fimo Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.6cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Biscuit Mold Cookie Mold 22mm Flexible Silicon...
Sold Out
{"id":5530295425,"title":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708","handle":"round-biscuit-mold-cookie-mold-22mm-flexible-silicone-mold-miniature-food-kawaii-decoden-sweets-charms-polymer-clay-fimo-wax-mini-mold-md708","description":"\u003cp\u003eRound Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Resin Mini Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:59:00-11:00","created_at":"2016-03-26T01:59:51-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["biscuit mold","cabochon mold","cell phone deco mold","cookie mold","dollhouse food mold","fake mini food mold","fimo biscuit mold","flexible mold","Handmade","kawaii mini mold","kitsch jewelry mold","mini sweets mold","Polymer Clay","silicone mold","Supplies","sweet biscuit mold"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943754945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD708","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708","public_title":null,"options":["Default Title"],"price":495,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021169.jpeg?v=1517649107","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021183.jpeg?v=1517649107","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_0c146a0b-ace6-486e-a1d1-ff374194aab1.jpeg?v=1517649107","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_287428be-f584-48d2-ad64-46eebdae6119.jpeg?v=1517649107","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_1077aee0-240d-4b66-9cc2-45d020c00091.jpeg?v=1517649107"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021169.jpeg?v=1517649107","options":["Title"],"media":[{"alt":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708 - MiniatureSweet","id":107537793073,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021169.jpeg?v=1517649107"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021169.jpeg?v=1517649107","width":600},{"alt":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708 - MiniatureSweet","id":107537825841,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021183.jpeg?v=1517649107"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272021183.jpeg?v=1517649107","width":600},{"alt":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708 - MiniatureSweet","id":107537858609,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_0c146a0b-ace6-486e-a1d1-ff374194aab1.jpeg?v=1517649107"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_0c146a0b-ace6-486e-a1d1-ff374194aab1.jpeg?v=1517649107","width":1218},{"alt":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708 - MiniatureSweet","id":107537891377,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_287428be-f584-48d2-ad64-46eebdae6119.jpeg?v=1517649107"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_287428be-f584-48d2-ad64-46eebdae6119.jpeg?v=1517649107","width":600},{"alt":"Round Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Mini Mold MD708 - MiniatureSweet","id":107537924145,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_1077aee0-240d-4b66-9cc2-45d020c00091.jpeg?v=1517649107"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_1077aee0-240d-4b66-9cc2-45d020c00091.jpeg?v=1517649107","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eRound Biscuit Mold Cookie Mold 22mm Flexible Silicone Mold Miniature Food Kawaii Decoden Sweets Charms Polymer Clay Fimo Wax Resin Mini Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Button Silicone Mold (3 Cavity) | Make Your Ow...
Sold Out
{"id":6976404193433,"title":"Round Button Silicone Mold (3 Cavity) | Make Your Own Button with Resin | Soft Clear Mould | Resin Art Supplies","handle":"round-button-silicone-mold-make-your-own-button-with-resin-soft-clear-mould-resin-art-supplies","description":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound button silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm or 0.39\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Medium: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 1.7cm or 0.67\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Large: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 2.5cm or 0.98\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-08-12T13:49:29-11:00","created_at":"2021-08-10T16:48:12-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["cabochon mold","Clear Mold","embellishment mold","epoxy resin","flexible mold","kawaii mold","resin art","resin craft","resin crafts","resin mold","resin mould","round button mold","sewing button","silicone mold","soft mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40792685019289,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2224C","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Button Silicone Mold (3 Cavity) | Make Your Own Button with Resin | Soft Clear Mould | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":399,"weight":18,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b2c03051-14cd-41e4-a0a5-68adf0827b00.jpg?v=1628711706","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_d6fbcc77-9a14-424b-aa80-90b0de6936ea.jpg?v=1628711707"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b2c03051-14cd-41e4-a0a5-68adf0827b00.jpg?v=1628711706","options":["Title"],"media":[{"alt":"Round Button Silicone Mold (3 Cavity) | Make Your Own Button with Resin | Soft Clear Mould | Resin Art Supplies - MiniatureSweet","id":23813212111001,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b2c03051-14cd-41e4-a0a5-68adf0827b00.jpg?v=1628711706"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_b2c03051-14cd-41e4-a0a5-68adf0827b00.jpg?v=1628711706","width":600},{"alt":"Round Button Silicone Mold (3 Cavity) | Make Your Own Button with Resin | Soft Clear Mould | Resin Art Supplies - MiniatureSweet","id":23813212078233,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_d6fbcc77-9a14-424b-aa80-90b0de6936ea.jpg?v=1628711707"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_d6fbcc77-9a14-424b-aa80-90b0de6936ea.jpg?v=1628711707","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound button silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm or 0.39\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Medium: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 1.7cm or 0.67\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Large: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 2.5cm or 0.98\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Cabochon Mold (9 Cavity) | Dome Cabochon Mould...
$1.59 USD
{"id":8555092097,"title":"Round Cabochon Mold (9 Cavity) | Dome Cabochon Mould | Flexible Silicone Mold | Resin Jewellery DIY (10mm to 30mm)","handle":"round-cabochon-mold-9-cavity-dome-cabochon-mould-flexible-silicone-mold-resin-jewellery-diy-10mm-to-30mm","description":"\u003cp\u003e9 cavity flexible silicone mold for making round domed cabochon. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement (approx.):\u003c\/p\u003e\n\u003cp\u003e- 1cm x 0.4cm \/ 0.39\" x 0.16\"\u003c\/p\u003e\n\u003cp\u003e- 1.2cm x 0.4cm \/ 0.47\" x 0.17\"\u003c\/p\u003e\n\u003cp\u003e- 1.4cm x 0.5cm \/ 0.55\" x 0.19\"\u003c\/p\u003e\n\u003cp\u003e- 1.5cm x 0.5cm \/ 0.59\" x 0.19\"\u003c\/p\u003e\n\u003cp\u003e- 1.6cm x 0.5cm \/ 0.63\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003e- 1.8cm x 0.5cm \/ 0.71\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003e- 2cm x 0.6cm \/ 0.79\" x 0.24\"\u003c\/p\u003e\n\u003cp\u003e- 2.5cm x 0.7cm \/ 0.98\" x 0.26\"\u003c\/p\u003e\n\u003cp\u003e- 3cm x 0.7cm \/ 1.18\" x 0.28\"\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2016-12-16T20:17:00-11:00","created_at":"2016-12-16T20:11:39-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix","tags":["12mm 14mm","15mm 16mm","18mm 20mm","cabochon mold","Cabochon Mould","circle mold","dome cabochon","Domed Cabochon","Flexible Mould","resin art","resin jewellery","Round Cabochon","silicone mold"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28873517505,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD078","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Cabochon Mold (9 Cavity) | Dome Cabochon Mould | Flexible Silicone Mold | Resin Jewellery DIY (10mm to 30mm)","public_title":null,"options":["Default Title"],"price":159,"weight":35,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078_14a98770-0747-4e69-9479-75533f9a21c2.jpg?v=1517665815","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078-02_a772d57a-9fcd-4ca1-b093-7e0f1223cb4f.jpg?v=1517665815"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078_14a98770-0747-4e69-9479-75533f9a21c2.jpg?v=1517665815","options":["Title"],"media":[{"alt":"Round Cabochon Mold (9 Cavity) | Dome Cabochon Mould | Flexible Silicone Mold | Resin Jewellery DIY (10mm to 30mm) - MiniatureSweet","id":209061642289,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078_14a98770-0747-4e69-9479-75533f9a21c2.jpg?v=1517665815"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078_14a98770-0747-4e69-9479-75533f9a21c2.jpg?v=1517665815","width":600},{"alt":"Round Cabochon Mold (9 Cavity) | Dome Cabochon Mould | Flexible Silicone Mold | Resin Jewellery DIY (10mm to 30mm) - MiniatureSweet","id":209061675057,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078-02_a772d57a-9fcd-4ca1-b093-7e0f1223cb4f.jpg?v=1517665815"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD078-02_a772d57a-9fcd-4ca1-b093-7e0f1223cb4f.jpg?v=1517665815","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e9 cavity flexible silicone mold for making round domed cabochon. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement (approx.):\u003c\/p\u003e\n\u003cp\u003e- 1cm x 0.4cm \/ 0.39\" x 0.16\"\u003c\/p\u003e\n\u003cp\u003e- 1.2cm x 0.4cm \/ 0.47\" x 0.17\"\u003c\/p\u003e\n\u003cp\u003e- 1.4cm x 0.5cm \/ 0.55\" x 0.19\"\u003c\/p\u003e\n\u003cp\u003e- 1.5cm x 0.5cm \/ 0.59\" x 0.19\"\u003c\/p\u003e\n\u003cp\u003e- 1.6cm x 0.5cm \/ 0.63\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003e- 1.8cm x 0.5cm \/ 0.71\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003e- 2cm x 0.6cm \/ 0.79\" x 0.24\"\u003c\/p\u003e\n\u003cp\u003e- 2.5cm x 0.7cm \/ 0.98\" x 0.26\"\u003c\/p\u003e\n\u003cp\u003e- 3cm x 0.7cm \/ 1.18\" x 0.28\"\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e"}
Round Cake w/ Ribbbon (16mm) Silicone Flexible Push ...
$5.25 USD
{"id":5530284033,"title":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658","handle":"round-cake-w-ribbbon-16mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md658","description":"\u003cp\u003e★Measurement: Approx. 1.6cm (Diameter) x 1.1cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:57:00-11:00","created_at":"2016-03-26T01:57:58-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","cute mold","deco mold","decoration mold","dollhouse mold","embellishment mold","fake food mold","Handmade","kawaii mold","miniature cake mold","polymer clay mold","resin mold","Scrapbooking","sculpey mold","Supplies","wax mold"],"price":525,"price_min":525,"price_max":525,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943707969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD658","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658","public_title":null,"options":["Default Title"],"price":525,"weight":11,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252543780.jpeg?v=1517649147","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252585431.jpeg?v=1517649147","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405562_93cfbd42-d5ef-4788-8d68-4f6ab9171c3d.jpeg?v=1517649147","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405563_7ab93cfc-be5e-45ca-a667-ae3d95b54269.jpeg?v=1517649147"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252543780.jpeg?v=1517649147","options":["Title"],"media":[{"alt":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658 - MiniatureSweet","id":107530485809,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252543780.jpeg?v=1517649147"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252543780.jpeg?v=1517649147","width":600},{"alt":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658 - MiniatureSweet","id":107530518577,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252585431.jpeg?v=1517649147"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.252585431.jpeg?v=1517649147","width":600},{"alt":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658 - MiniatureSweet","id":107530551345,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405562_93cfbd42-d5ef-4788-8d68-4f6ab9171c3d.jpeg?v=1517649147"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405562_93cfbd42-d5ef-4788-8d68-4f6ab9171c3d.jpeg?v=1517649147","width":600},{"alt":"Round Cake w\/ Ribbbon (16mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD658 - MiniatureSweet","id":107530584113,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405563_7ab93cfc-be5e-45ca-a667-ae3d95b54269.jpeg?v=1517649147"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188405563_7ab93cfc-be5e-45ca-a667-ae3d95b54269.jpeg?v=1517649147","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6cm (Diameter) x 1.1cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Cake with Flower Border (25mm) Silicone Flexib...
$5.45 USD
{"id":5530284225,"title":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659","handle":"round-cake-with-flower-border-25mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-fondant-md659","description":"\u003cp\u003e★Measurement: approx. 2.5cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:58:00-11:00","created_at":"2016-03-26T01:58:00-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["bead mold","cabochon mold","cake mold","cell phone mold","deco mold","decoden mold","decoration mold","dollhouse mold","epoxy mold","fake food mold","Handmade","kawaii mold","mini food mold","polymer clay mold","Scrapbooking","Supplies"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943708929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD659","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659","public_title":null,"options":["Default Title"],"price":545,"weight":19,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247530052.jpeg?v=1517649156","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247564257.jpeg?v=1517649156","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_26b5d221-a2c0-4e04-a8f9-402054030c68.jpeg?v=1517649156","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_49ada71f-9629-4d9e-a080-733bfbd5c315.jpeg?v=1517649156"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247530052.jpeg?v=1517649156","options":["Title"],"media":[{"alt":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659 - MiniatureSweet","id":107530616881,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247530052.jpeg?v=1517649156"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247530052.jpeg?v=1517649156","width":600},{"alt":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659 - MiniatureSweet","id":107530649649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247564257.jpeg?v=1517649156"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.247564257.jpeg?v=1517649156","width":600},{"alt":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659 - MiniatureSweet","id":107530682417,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_26b5d221-a2c0-4e04-a8f9-402054030c68.jpeg?v=1517649156"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609566_26b5d221-a2c0-4e04-a8f9-402054030c68.jpeg?v=1517649156","width":600},{"alt":"Round Cake with Flower Border (25mm) Silicone Flexible Push Mold Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD659 - MiniatureSweet","id":107530715185,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_49ada71f-9629-4d9e-a080-733bfbd5c315.jpeg?v=1517649156"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195609567_49ada71f-9629-4d9e-a080-733bfbd5c315.jpeg?v=1517649156","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.5cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Cookie / Biscuit (26mm) Silicone Flexible Push...
Sold Out
{"id":5530215233,"title":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176","handle":"round-cookie-biscuit-26mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-fondant-md176","description":"\u003cp\u003e★Measurement: approx. 2.6cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:37:00-11:00","created_at":"2016-03-26T01:37:45-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["bakery mold","cabochon mold","cute mold","deco mold","decoden mold","embellishment mold","fake food mold","Handmade","kawaii mold","kitsch jewelry mold","polymer clay mold","resin mold","Scrapbooking","sculpey mold","Snickerdoodle mold","Supplies"],"price":525,"price_min":525,"price_max":525,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943484993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD176","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176","public_title":null,"options":["Default Title"],"price":525,"weight":13,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012499.jpeg?v=1517649217","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012500.jpeg?v=1517649217","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272547346.jpeg?v=1517649217","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012501.jpeg?v=1517649217","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012502.jpeg?v=1517649217"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012499.jpeg?v=1517649217","options":["Title"],"media":[{"alt":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176 - MiniatureSweet","id":107460591665,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012499.jpeg?v=1517649217"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012499.jpeg?v=1517649217","width":600},{"alt":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176 - MiniatureSweet","id":107460624433,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012500.jpeg?v=1517649217"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012500.jpeg?v=1517649217","width":600},{"alt":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176 - MiniatureSweet","id":107460657201,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272547346.jpeg?v=1517649217"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272547346.jpeg?v=1517649217","width":1218},{"alt":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176 - MiniatureSweet","id":107460689969,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012501.jpeg?v=1517649217"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012501.jpeg?v=1517649217","width":600},{"alt":"Round Cookie \/ Biscuit (26mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Fondant) MD176 - MiniatureSweet","id":107460722737,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012502.jpeg?v=1517649217"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196012502.jpeg?v=1517649217","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.6cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Cookie Silicone Mold | Biscuit Mold | Food Mol...
$5.99 USD
{"id":10348484481,"title":"Round Cookie Silicone Mold | Biscuit Mold | Food Mold | UV Resin Mould | Kawaii Soft Mold | Sweet Deco | Decoden Supplies (35mm)","handle":"round-cookie-silicone-mold-biscuit-mold-food-mold-uv-resin-mould-kawaii-soft-mold-sweet-deco-decoden-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRound cookie silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.5cm or 1.38\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T02:56:54-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["biscuit mold","cabochon mold","Clear Mold","cookie mold","decoden mold","epoxy resin","fake food mold","faux food mold","flexible mold","kawaii mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38683010881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD091A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Cookie Silicone Mold | Biscuit Mold | Food Mold | UV Resin Mould | Kawaii Soft Mold | Sweet Deco | Decoden Supplies (35mm)","public_title":null,"options":["Default Title"],"price":599,"weight":25,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD091A.jpg?v=1517671533"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD091A.jpg?v=1517671533","options":["Title"],"media":[{"alt":"Round Cookie Silicone Mold | Biscuit Mold | Food Mold | UV Resin Mould | Kawaii Soft Mold | Sweet Deco | Decoden Supplies (35mm) - MiniatureSweet","id":423164051505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD091A.jpg?v=1517671533"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD091A.jpg?v=1517671533","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRound cookie silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.5cm or 1.38\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Cupcake Bottom Silicone Mold (6 Cavity) | Baki...
$6.99 USD
{"id":8700648449,"title":"Round Cupcake Bottom Silicone Mold (6 Cavity) | Baking Mold | Round Cabochon Mold | Food Safe Flexible Mould | Epoxy Resin Mold (70mm x 31mm)","handle":"round-cupcake-bottom-silicone-mold-6-cavity-baking-mold-round-cabochon-mold-food-safe-flexible-mould-epoxy-resin-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity round cupcake bottom mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7cm (Diameter of the top) x 5.8m ( Diameter of the bottom) x 3.1cm (Depth) \/ 2.76\"cm (Diameter of the top) x 2.28\" ( Diameter of the bottom) x 1.22\" (Depth) \u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T01:34:23-11:00","vendor":"MiniatureSweet","type":"Round Mold","tags":["Baking Mold","Cabochon Mold","Cupcake Bottom","cupcake mold","Epoxy Resin Mold","Flexible Mould","Food Safe Mold","Large Mold","Round Cabochon","Round Mold","Shape Mold","silicone mold","Soap Mold"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29640399489,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Cupcake Bottom Silicone Mold (6 Cavity) | Baking Mold | Round Cabochon Mold | Food Safe Flexible Mould | Epoxy Resin Mold (70mm x 31mm)","public_title":null,"options":["Default Title"],"price":699,"weight":180,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004.jpg?v=1517666884","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004-02.jpg?v=1517666884"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004.jpg?v=1517666884","options":["Title"],"media":[{"alt":"Round Cupcake Bottom Silicone Mold (6 Cavity) | Baking Mold | Round Cabochon Mold | Food Safe Flexible Mould | Epoxy Resin Mold (70mm x 31mm) - MiniatureSweet","id":228058791985,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004.jpg?v=1517666884"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004.jpg?v=1517666884","width":600},{"alt":"Round Cupcake Bottom Silicone Mold (6 Cavity) | Baking Mold | Round Cabochon Mold | Food Safe Flexible Mould | Epoxy Resin Mold (70mm x 31mm) - MiniatureSweet","id":228058824753,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004-02.jpg?v=1517666884"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3004-02.jpg?v=1517666884","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity round cupcake bottom mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7cm (Diameter of the top) x 5.8m ( Diameter of the bottom) x 3.1cm (Depth) \/ 2.76\"cm (Diameter of the top) x 2.28\" ( Diameter of the bottom) x 1.22\" (Depth) \u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Doily Silicone Mold (3 Cavity) | Filigree Doil...
Sold Out
{"id":2011728773169,"title":"Round Doily Silicone Mold (3 Cavity) | Filigree Doiley Mold | Dollhouse Miniature Doilies DIY | Clear Soft Mold for UV Resin","handle":"round-doily-silicone-mold-filigree-doiley-mold-dollhouse-miniature-doilies-diy-clear-soft-mold-for-uv-resin","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFancy round doily silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin \/ epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003eLeft: approx. 3.3cm or 1.3\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eMiddle: approx. 2.5cm or 0.98\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eRight: approx. 4.6cm or 1.81\" (Diameter)\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-06-05T19:47:58-11:00","created_at":"2019-06-05T17:00:43-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","doiley mold","doily mold","doll house","dollhouse","epoxy resin","fancy doilies","flexible mold","kawaii mold","miniature","resin art","resin craft","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","round doily","silicone mold","soft mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15582322982961,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD316A","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Doily Silicone Mold (3 Cavity) | Filigree Doiley Mold | Dollhouse Miniature Doilies DIY | Clear Soft Mold for UV Resin","public_title":null,"options":["Default Title"],"price":399,"weight":25,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_17c2f8d3-1a24-4842-865f-1d79654155d2.jpg?v=1559863816","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_7f429449-c7e0-4a0a-b2c1-05ac8ebdfa02.jpg?v=1559863816"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_17c2f8d3-1a24-4842-865f-1d79654155d2.jpg?v=1559863816","options":["Title"],"media":[{"alt":"Round Doily Silicone Mold (3 Cavity) | Filigree Doiley Mold | Dollhouse Miniature Doilies DIY | Clear Soft Mold for UV Resin - MiniatureSweet","id":2816963346567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_17c2f8d3-1a24-4842-865f-1d79654155d2.jpg?v=1559863816"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_17c2f8d3-1a24-4842-865f-1d79654155d2.jpg?v=1559863816","width":600},{"alt":"Round Doily Silicone Mold (3 Cavity) | Filigree Doiley Mold | Dollhouse Miniature Doilies DIY | Clear Soft Mold for UV Resin - MiniatureSweet","id":2816963313799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_7f429449-c7e0-4a0a-b2c1-05ac8ebdfa02.jpg?v=1559863816"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_7f429449-c7e0-4a0a-b2c1-05ac8ebdfa02.jpg?v=1559863816","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFancy round doily silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin \/ epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003eLeft: approx. 3.3cm or 1.3\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eMiddle: approx. 2.5cm or 0.98\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eRight: approx. 4.6cm or 1.81\" (Diameter)\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Dome and Teardrop Soft Mold (7 Cavity) | Flat ...
$3.99 USD
{"id":792116658225,"title":"Round Dome and Teardrop Soft Mold (7 Cavity) | Flat Circle Silicone Mold | Half Sphere Mold | Clear Mould for UV Resin Jewelry DIY","handle":"round-dome-and-teardrop-soft-mold-7-cavity-flat-circle-silicone-mold-half-sphere-mold-clear-mould-for-uv-resin-jewelry-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of round dome, flat circle and teardrop. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eBig dome: approx. 2cm (Dia) x 1cm (H) \/ 0.79\" (Dia) x 0.39\" (H)\u003c\/p\u003e\n\u003cp\u003eSmall dome: approx. 1.2cm (Dia) x 0.6cm (H) \/ 0.47\" (Dia) x 0.24\" (H)\u003c\/p\u003e\n\u003cp\u003eFlat circle: approx. 2cm (Dia) \/ 0.79\" (Dia)\u003c\/p\u003e\n\u003cp\u003eTeardrop: approx. 1.7cm (W) x 2.7cm (L) \/ 0.67\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T17:03:13-11:00","created_at":"2018-07-03T16:04:24-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","dome mold","epoxy resin","flat circle mold","flexible mold","half ball mold","half globe mold","half sphere mold","kawaii mold","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold","teardrop mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8934328008753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1197","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Dome and Teardrop Soft Mold (7 Cavity) | Flat Circle Silicone Mold | Half Sphere Mold | Clear Mould for UV Resin Jewelry DIY","public_title":null,"options":["Default Title"],"price":399,"weight":31,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_8d6f5de6-ca39-40c5-8d40-74052f844095.jpg?v=1530695632"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_8d6f5de6-ca39-40c5-8d40-74052f844095.jpg?v=1530695632","options":["Title"],"media":[{"alt":"Round Dome and Teardrop Soft Mold (7 Cavity) | Flat Circle Silicone Mold | Half Sphere Mold | Clear Mould for UV Resin Jewelry DIY - MiniatureSweet","id":2596219650183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_8d6f5de6-ca39-40c5-8d40-74052f844095.jpg?v=1530695632"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_8d6f5de6-ca39-40c5-8d40-74052f844095.jpg?v=1530695632","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii soft silicone mold with the designs of round dome, flat circle and teardrop. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eBig dome: approx. 2cm (Dia) x 1cm (H) \/ 0.79\" (Dia) x 0.39\" (H)\u003c\/p\u003e\n\u003cp\u003eSmall dome: approx. 1.2cm (Dia) x 0.6cm (H) \/ 0.47\" (Dia) x 0.24\" (H)\u003c\/p\u003e\n\u003cp\u003eFlat circle: approx. 2cm (Dia) \/ 0.79\" (Dia)\u003c\/p\u003e\n\u003cp\u003eTeardrop: approx. 1.7cm (W) x 2.7cm (L) \/ 0.67\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Dome Silicone Mold (24 Cavity) | Dome Cabochon...
$5.99 USD
{"id":8705340609,"title":"Round Dome Silicone Mold (24 Cavity) | Dome Cabochon Mold | Half Sphere Mold | Flexible Epoxy Resin Mold | Food Safe Mold (28mm x 14mm)","handle":"round-dome-silicone-mold-24-cavity-dome-cabochon-mold-half-sphere-mold-flexible-epoxy-resin-mold-food-safe-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e24 cavity round dome mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that it may NOT be pink color as shown in the picture*\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.8cm (Diameter) x 1.4cm (Depth) \/ 1.1\" (Diameter) x 0.55\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-22T00:21:30-11:00","vendor":"MiniatureSweet","type":"Round Mold","tags":["28mm Dome","cabochon mold","circle mold","Dome Cabochon","Dome Mold","epoxy resin mold","Flexible Mold","food safe mold","Half Sphere Mold","round cabochon","Round Mold","semi sphere","semisphere mold","silicone mold"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29679103233,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3013","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Dome Silicone Mold (24 Cavity) | Dome Cabochon Mold | Half Sphere Mold | Flexible Epoxy Resin Mold | Food Safe Mold (28mm x 14mm)","public_title":null,"options":["Default Title"],"price":599,"weight":123,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013.jpg?v=1517666931","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013-02.jpg?v=1517666931"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013.jpg?v=1517666931","options":["Title"],"media":[{"alt":"Round Dome Silicone Mold (24 Cavity) | Dome Cabochon Mold | Half Sphere Mold | Flexible Epoxy Resin Mold | Food Safe Mold (28mm x 14mm) - MiniatureSweet","id":228429332529,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013.jpg?v=1517666931"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013.jpg?v=1517666931","width":600},{"alt":"Round Dome Silicone Mold (24 Cavity) | Dome Cabochon Mold | Half Sphere Mold | Flexible Epoxy Resin Mold | Food Safe Mold (28mm x 14mm) - MiniatureSweet","id":228429365297,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013-02.jpg?v=1517666931"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3013-02.jpg?v=1517666931","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e24 cavity round dome mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that it may NOT be pink color as shown in the picture*\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.8cm (Diameter) x 1.4cm (Depth) \/ 1.1\" (Diameter) x 0.55\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Fish Scales Cabochon Silicone Mold (2 Cavity) ...
$1.99 USD
{"id":6124134531225,"title":"Round Fish Scales Cabochon Silicone Mold (2 Cavity) | Resin Jewellery DIY | Resin Art Supplies (12mm)","handle":"round-fish-scales-cabochon-silicone-mold-resin-jewellery-diy-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound fish scales cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm or 0.47\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-01-31T17:11:16-11:00","created_at":"2021-01-31T15:21:40-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","embellishment mold","epoxy resin","fish scale mold","flexible mold","kawaii crafts","kawaii mold","mermaid mold","mermaid scales","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round cabochon","round fish scale","shaker bit","shaker bits","Silicone Mold","small mold","soft mold","stud earring","Stud Earrings"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37969685348505,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD209B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Fish Scales Cabochon Silicone Mold (2 Cavity) | Resin Jewellery DIY | Resin Art Supplies (12mm)","public_title":null,"options":["Default Title"],"price":199,"weight":5,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_7c6d70bc-adbf-4569-871c-68c4046507b6.jpg?v=1612235917"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_7c6d70bc-adbf-4569-871c-68c4046507b6.jpg?v=1612235917","options":["Title"],"media":[{"alt":"Round Fish Scales Cabochon Silicone Mold (2 Cavity) | Resin Jewellery DIY | Resin Art Supplies (12mm) - MiniatureSweet","id":17481337962649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_7c6d70bc-adbf-4569-871c-68c4046507b6.jpg?v=1612235917"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/017_7c6d70bc-adbf-4569-871c-68c4046507b6.jpg?v=1612235917","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound fish scales cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm or 0.47\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Round Lollipop Silicone Mold (12 Cavity) | Candy Mol...
$9.99 USD
{"id":1483077025841,"title":"Round Lollipop Silicone Mold (12 Cavity) | Candy Mold | Fake Food Jewelry Making | Kawaii Resin Craft Supplies | Food Safe Mould (35mm)","handle":"round-lollipop-silicone-mold-candy-mold-fake-food-jewelry-making-kawaii-resin-craft-supplies-food-safe-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e12 cavity round lollipop mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm or 1.38\" (Diameter) \u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-02T14:49:04-11:00","created_at":"2018-10-12T15:51:00-11:00","vendor":"MiniatureSweet","type":"Candy Mold, Mold Mix","tags":["cabochon mold","candy mold","candy sucker mold","chocolate mold","epoxy resin","Flexible Mold","Food Safe Mold","lollipop mold","lolly mold","resin art","resin craft","resin mold","resin mould","round lollipop","silicone mold","sticky pop mold"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13608648835121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2178","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Lollipop Silicone Mold (12 Cavity) | Candy Mold | Fake Food Jewelry Making | Kawaii Resin Craft Supplies | Food Safe Mould (35mm)","public_title":null,"options":["Default Title"],"price":999,"weight":293,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_faf7f68d-dcd6-4f8a-86d9-f5ba1a5765f4.jpg?v=1539528720"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_faf7f68d-dcd6-4f8a-86d9-f5ba1a5765f4.jpg?v=1539528720","options":["Title"],"media":[{"alt":"Round Lollipop Silicone Mold (12 Cavity) | Candy Mold | Fake Food Jewelry Making | Kawaii Resin Craft Supplies | Food Safe Mould (35mm) - MiniatureSweet","id":2654752112775,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_faf7f68d-dcd6-4f8a-86d9-f5ba1a5765f4.jpg?v=1539528720"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_faf7f68d-dcd6-4f8a-86d9-f5ba1a5765f4.jpg?v=1539528720","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e12 cavity round lollipop mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm or 1.38\" (Diameter) \u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Oval Teardrop Cabochon Silicone Mold Assortmen...
$5.99 USD
{"id":4189498638471,"title":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts","handle":"round-oval-teardrop-cabochon-silicone-mold-assortment-gemstone-mold-gem-mold-soft-clear-mould-for-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, oval and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 7mm, 8mm, 11mm, 14mm, 16mm, 23mm, 29mm and 34mm\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 11mm x 17mm, 15mm x 23mm, 18mm x 27mm, 23mm x 34mm, 28mm x 41mm\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 11mm x 17mm, 15mm x 23mm, 19mm x 29mm, 24mm x 36mm, 30mm x 45mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:36:33-11:00","created_at":"2019-10-08T16:28:41-11:00","vendor":"MiniatureSweet","type":"Round Mold, Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden supplies","dome cabochon","embellishment mold","epoxy resin","flexible mold","gem mold","gems","gemstone mold","gemstones","oval mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","tear drop","teardrop mold","uv resin"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30466899247239,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3077","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts","public_title":null,"options":["Default Title"],"price":599,"weight":82,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","options":["Title"],"media":[{"alt":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts - MiniatureSweet","id":4861169270919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","width":600},{"alt":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts - MiniatureSweet","id":4861169434759,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, oval and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 7mm, 8mm, 11mm, 14mm, 16mm, 23mm, 29mm and 34mm\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 11mm x 17mm, 15mm x 23mm, 18mm x 27mm, 23mm x 34mm, 28mm x 41mm\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 11mm x 17mm, 15mm x 23mm, 19mm x 29mm, 24mm x 36mm, 30mm x 45mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Round Pentagram Star Charm Mold | Magical Girl Jewel...
$1.49 USD
{"id":8559927425,"title":"Round Pentagram Star Charm Mold | Magical Girl Jewelry Mould | Mahou Kei Decoden | Kawaii Cabochon Mold | UV Resin Mold | Flexible Silicone Mold | Clear Mold (34mm x 35mm)","handle":"round-pentagram-star-charm-mold-magical-girl-jewelry-mould-mahou-kei-decoden-kawaii-cabochon-mold-uv-resin-mold-flexible-silicone-mold-clear-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible round pentagram \/ star charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.4cm (W) x 3.5cm (L) \/ 1.34\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-18T16:05:00-11:00","created_at":"2016-12-18T15:56:59-11:00","vendor":"MiniatureSweet","type":"Star Mold","tags":["Cabochon Mold","Charm Mold","Clear Mold","decoden supplies","epoxy resin mould","Flexible Mould","Jewelry Mould","kawaii cabochon","Magic Circle","Magical Girl","Mahou Kei","Round Star Charm","Silicone Mold","UV resin mold"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28899964481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD999","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Pentagram Star Charm Mold | Magical Girl Jewelry Mould | Mahou Kei Decoden | Kawaii Cabochon Mold | UV Resin Mold | Flexible Silicone Mold | Clear Mold (34mm x 35mm)","public_title":null,"options":["Default Title"],"price":149,"weight":10,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD999.jpg?v=1517665852"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD999.jpg?v=1517665852","options":["Title"],"media":[{"alt":"Round Pentagram Star Charm Mold | Magical Girl Jewelry Mould | Mahou Kei Decoden | Kawaii Cabochon Mold | UV Resin Mold | Flexible Silicone Mold | Clear Mold (34mm x 35mm) - MiniatureSweet","id":209386274865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD999.jpg?v=1517665852"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD999.jpg?v=1517665852","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible round pentagram \/ star charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.4cm (W) x 3.5cm (L) \/ 1.34\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Perfume Bottle Silicone Mold | 3D Eau de Parfu...
$9.99 USD
{"id":10348423233,"title":"Round Perfume Bottle Silicone Mold | 3D Eau de Parfum Mold | UV Resin Mould | Kawaii Craft Supplies (28mm x 35mm)","handle":"round-perfume-bottle-silicone-mold-3d-eau-de-parfum-mold-uv-resin-mould-kawaii-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRound eau de parfum bottle silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.8cm (W) x 3.5cm (L) \/ 1.1\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T02:32:34-11:00","vendor":"MiniatureSweet","type":"Beauty Mold","tags":["cabochon mold","Clear Mold","decoden mold","Eau de Parfum","epoxy resin","flexible mold","kawaii mold","Perfume Bottle Mold","resin art","resin craft","resin mold","resin mould","round parfum","round perfume","silicone mold","soft mold","UV resin"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38682934273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD089A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Perfume Bottle Silicone Mold | 3D Eau de Parfum Mold | UV Resin Mould | Kawaii Craft Supplies (28mm x 35mm)","public_title":null,"options":["Default Title"],"price":999,"weight":24,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD089A.jpg?v=1517671528"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD089A.jpg?v=1517671528","options":["Title"],"media":[{"alt":"Round Perfume Bottle Silicone Mold | 3D Eau de Parfum Mold | UV Resin Mould | Kawaii Craft Supplies (28mm x 35mm) - MiniatureSweet","id":423141703729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD089A.jpg?v=1517671528"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD089A.jpg?v=1517671528","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eRound eau de parfum bottle silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.8cm (W) x 3.5cm (L) \/ 1.1\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Resin Cabochon Silicone Mold (15 Cavity) | Epo...
Sold Out
{"id":8700787777,"title":"Round Resin Cabochon Silicone Mold (15 Cavity) | Epoxy Resin Mold | Food Safe Flexible Mold | Kawaii Resin Charm Making | Decoden Supplies (39mm)","handle":"round-resin-cabochon-silicone-mold-15-cavity-epoxy-resin-mold-food-safe-flexible-mold-kawaii-resin-charm-making-decoden-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e15 cavity round mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (Diameter) x 2cm (Depth) \/ 1.54\" (Diameter) x 0.79\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T03:04:33-11:00","vendor":"MiniatureSweet","type":"Round Mold","tags":["cabochon mold","decoden supplies","epoxy resin mold","Flexible Mold","food safe mold","Kawaii Resin Charm","Resin Cabochon","resin jewellery","resin pendant","round cabochon","round mold","shape mold","Silicone Mold"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29641758145,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3007","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Resin Cabochon Silicone Mold (15 Cavity) | Epoxy Resin Mold | Food Safe Flexible Mold | Kawaii Resin Charm Making | Decoden Supplies (39mm)","public_title":null,"options":["Default Title"],"price":599,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007.jpg?v=1517666897","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007-02.jpg?v=1517666897"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007.jpg?v=1517666897","options":["Title"],"media":[{"alt":"Round Resin Cabochon Silicone Mold (15 Cavity) | Epoxy Resin Mold | Food Safe Flexible Mold | Kawaii Resin Charm Making | Decoden Supplies (39mm) - MiniatureSweet","id":228064067633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007.jpg?v=1517666897"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007.jpg?v=1517666897","width":600},{"alt":"Round Resin Cabochon Silicone Mold (15 Cavity) | Epoxy Resin Mold | Food Safe Flexible Mold | Kawaii Resin Charm Making | Decoden Supplies (39mm) - MiniatureSweet","id":228064100401,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007-02.jpg?v=1517666897"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3007-02.jpg?v=1517666897","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e15 cavity round mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (Diameter) x 2cm (Depth) \/ 1.54\" (Diameter) x 0.79\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Round Resin Shaker Charm Silicone Mold | Circle Soft...
$0.99 USD
{"id":4166218088583,"title":"Round Resin Shaker Charm Silicone Mold | Circle Soft Mold | Decoden Cabochon DIY | UV Resin Art Supplies (65mm)","handle":"round-resin-shaker-charm-silicone-mold-circle-soft-mold-decoden-cabochon-diy-uv-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in round shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 6.5cm or 2.56\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-10T17:39:52-11:00","created_at":"2019-09-28T19:38:55-11:00","vendor":"MiniatureSweet","type":"Round Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","Circle Mold","decoden supplies","epoxy resin","flexible mold","geometric mold","Geometry Mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","round mold","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30285559922823,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2170A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Resin Shaker Charm Silicone Mold | Circle Soft Mold | Decoden Cabochon DIY | UV Resin Art Supplies (65mm)","public_title":null,"options":["Default Title"],"price":99,"weight":14,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_1038bef7-de7b-4220-b939-5b4a46d1dd4e.jpg?v=1569836274","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_eb77e9ca-009e-4826-99eb-7d68c6c367e3.jpg?v=1569836274"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_1038bef7-de7b-4220-b939-5b4a46d1dd4e.jpg?v=1569836274","options":["Title"],"media":[{"alt":"Round Resin Shaker Charm Silicone Mold | Circle Soft Mold | Decoden Cabochon DIY | UV Resin Art Supplies (65mm) - MiniatureSweet","id":2355143409799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_1038bef7-de7b-4220-b939-5b4a46d1dd4e.jpg?v=1569836274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_1038bef7-de7b-4220-b939-5b4a46d1dd4e.jpg?v=1569836274","width":600},{"alt":"Round Resin Shaker Charm Silicone Mold | Circle Soft Mold | Decoden Cabochon DIY | UV Resin Art Supplies (65mm) - MiniatureSweet","id":2355143377031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_eb77e9ca-009e-4826-99eb-7d68c6c367e3.jpg?v=1569836274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_eb77e9ca-009e-4826-99eb-7d68c6c367e3.jpg?v=1569836274","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in round shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 6.5cm or 2.56\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Round Rose Cameo (17mm) Silicone Flexible Push Mold ...
$4.95 USD
{"id":5530274049,"title":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607","handle":"round-rose-cameo-17mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-resin-epoxy-wax-gum-paste-fondant-md607","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:56:00-11:00","created_at":"2016-03-26T01:56:10-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Cameo Mold","tags":["beads mold","cabochon mold","cell phone deco mold","deco mold","decoden supplies","decoration mold","embellishment mold","Handmade","kawaii mold","phone deco mold","polymer clay mold","Scrapbooking","sculpey mold","Supplies","topper mold","victorian deco mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943661889,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD607","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841215.jpeg?v=1517649342","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841216.jpeg?v=1517649342","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841217.jpeg?v=1517649342","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841218.jpeg?v=1517649342"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841215.jpeg?v=1517649342","options":["Title"],"media":[{"alt":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607 - MiniatureSweet","id":107523702833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841215.jpeg?v=1517649342"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841215.jpeg?v=1517649342","width":600},{"alt":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607 - MiniatureSweet","id":107523735601,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841216.jpeg?v=1517649342"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841216.jpeg?v=1517649342","width":600},{"alt":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607 - MiniatureSweet","id":107523768369,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841217.jpeg?v=1517649342"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841217.jpeg?v=1517649342","width":600},{"alt":"Round Rose Cameo (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD607 - MiniatureSweet","id":107523801137,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841218.jpeg?v=1517649342"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193841218.jpeg?v=1517649342","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Round Shaker Mold | Kawaii Bezel Mold for Liquid Res...
$6.99 USD
{"id":9940745729,"title":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm)","handle":"round-shaker-mold-kawaii-bezel-mold-for-liquid-resin-charm-making-waterfall-resin-piece-diy-decoden-phone-case-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in round shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 8cm or 3.15\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-07-24T22:36:44-11:00","created_at":"2017-07-24T21:55:31-11:00","vendor":"MiniatureSweet","type":"Round Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","circle mold","decoden supplies","epoxy resin","flexible mold","geometric mold","geometry mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin crafts","resin mold","Resin Mould","resin piece","round mold","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36763930753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2093","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm)","public_title":null,"options":["Default Title"],"price":699,"weight":104,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-02.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-01.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-02.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-03.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-04.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-05.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-06.jpg?v=1517670345","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-07.jpg?v=1517670345"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093.jpg?v=1517670345","options":["Title"],"media":[{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006047793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006015025,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-02.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-02.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006604849,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-01.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-01.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006572081,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-02.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-02.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006539313,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-03.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-03.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006506545,"position":6,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-04.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-04.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006146097,"position":7,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-05.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-05.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006113329,"position":8,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-06.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-06.jpg?v=1517670345","width":600},{"alt":"Round Shaker Mold | Kawaii Bezel Mold for Liquid Resin Charm Making | Waterfall Resin Piece DIY | Decoden Phone Case Supplies (80mm) - MiniatureSweet","id":364006080561,"position":9,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-07.jpg?v=1517670345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093-all-07.jpg?v=1517670345","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in round shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 8cm or 3.15\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}
Round Square Teardrop Silicone Mold (8 Cavity) | Geo...
$1.99 USD
{"id":4169287991431,"title":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies","handle":"round-square-teardrop-silicone-mold-geometry-cabochon-making-geometric-jewellery-diy-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, square and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.5cm, 1.7cm, 2.3cm and 2.4cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.5cm and 1.6cm (W)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 2.4cm (W) x 3.5cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:36:31-11:00","created_at":"2019-10-07T20:51:11-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Circle Mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","Square Mold","tear drop mold","teardrop mold","uv resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30301289545863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2022A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":199,"weight":29,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","options":["Title"],"media":[{"alt":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies - MiniatureSweet","id":3170399355015,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","width":600},{"alt":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies - MiniatureSweet","id":3170399125639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, square and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.5cm, 1.7cm, 2.3cm and 2.4cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.5cm and 1.6cm (W)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 2.4cm (W) x 3.5cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Round Victorian Lady Cameo (28mm) Silicone Flexible ...
Sold Out
{"id":5530276609,"title":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624","handle":"round-victorian-lady-cameo-28mm-silicone-flexible-butter-push-mold-jewelry-making-fimo-polymer-clay-resin-scrapbooking-cake-deco-md624","description":"\u003cp\u003e★Measurement: Approx. 2.8cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:56:00-11:00","created_at":"2016-03-26T01:56:44-11:00","vendor":"MiniatureSweet","type":"Cameo Mold","tags":["butter mold","cabochon mold","deco mold","decoration mold","embellishment mold","goddess mold","Handmade","jewelry mold","kawaii mold","necklace mold","polymer clay mold","resin mold","Scrapbooking","sculpey mold","Supplies","vintage mold"],"price":545,"price_min":545,"price_max":545,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943671489,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD624","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624","public_title":null,"options":["Default Title"],"price":545,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236671650.jpeg?v=1517649355","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236687983.jpeg?v=1517649355","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390981330_tk93.jpeg?v=1517649355","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390980125_hdh3.jpeg?v=1517649355"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236671650.jpeg?v=1517649355","options":["Title"],"media":[{"alt":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624 - MiniatureSweet","id":107525832753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236671650.jpeg?v=1517649355"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236671650.jpeg?v=1517649355","width":600},{"alt":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624 - MiniatureSweet","id":107525865521,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236687983.jpeg?v=1517649355"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236687983.jpeg?v=1517649355","width":600},{"alt":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624 - MiniatureSweet","id":107525898289,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390981330_tk93.jpeg?v=1517649355"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390981330_tk93.jpeg?v=1517649355","width":600},{"alt":"Round Victorian Lady Cameo (28mm) Silicone Flexible Butter Push Mold Jewelry Making Fimo Polymer Clay Resin Scrapbooking Cake Deco MD624 - MiniatureSweet","id":107525931057,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390980125_hdh3.jpeg?v=1517649355"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.390980125_hdh3.jpeg?v=1517649355","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.8cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Rounded Square Silicone Mold (4 Cavity) | Epoxy Resi...
Sold Out
{"id":8704829057,"title":"Rounded Square Silicone Mold (4 Cavity) | Epoxy Resin Cabochon Mold | Soap Mould | Flexible Baking Mold | Food Safe Mould (65mm)","handle":"round-square-silicone-mold-4-cavity-epoxy-resin-cabochon-mold-soap-mould-flexible-baking-mold-food-safe-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e4 cavity rounded square mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.5cm (W) x 3cm (Depth) \/ 2.56\" (W) x 1.18\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T19:25:58-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["Baking Mold","cabochon mold","Epoxy Resin Mold","flexible mold","Food Safe Mould","Resin Cabochon DIY","resin charm","resin pendant","round square","Rounded Square","shape mold","silicone mold","Soap Mould","Square mold"],"price":499,"price_min":499,"price_max":499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29671309121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3010","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rounded Square Silicone Mold (4 Cavity) | Epoxy Resin Cabochon Mold | Soap Mould | Flexible Baking Mold | Food Safe Mould (65mm)","public_title":null,"options":["Default Title"],"price":499,"weight":136,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010.jpg?v=1517666911","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010-02.jpg?v=1517666911"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010.jpg?v=1517666911","options":["Title"],"media":[{"alt":"Rounded Square Silicone Mold (4 Cavity) | Epoxy Resin Cabochon Mold | Soap Mould | Flexible Baking Mold | Food Safe Mould (65mm) - MiniatureSweet","id":228375134257,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010.jpg?v=1517666911"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010.jpg?v=1517666911","width":600},{"alt":"Rounded Square Silicone Mold (4 Cavity) | Epoxy Resin Cabochon Mold | Soap Mould | Flexible Baking Mold | Food Safe Mould (65mm) - MiniatureSweet","id":228375167025,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010-02.jpg?v=1517666911"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3010-02.jpg?v=1517666911","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e4 cavity rounded square mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.5cm (W) x 3cm (Depth) \/ 2.56\" (W) x 1.18\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Rubber Duck Silicone Mold (16 Cavity) | Animal Bird ...
$4.99 USD
{"id":1483052089393,"title":"Rubber Duck Silicone Mold (16 Cavity) | Animal Bird Flexible Mold | Kawaii Resin Cabochon Mould | Decoden Piece DIY (29mm x 30mm)","handle":"rubber-duck-silicone-mold-animal-bird-flexible-mold-kawaii-resin-cabochon-mould-decoden-piece-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e16 cavity rubber duck mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that the color of the mold could be different from pictured!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.9cm (W) x 3cm (L) \/ 1.14\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-11-02T14:49:03-11:00","created_at":"2018-10-12T14:58:24-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Mold Mix","tags":["animal mold","bathing toy","bird mold","cabochon mold","chocolate mold","epoxy resin","Flexible Mold","Food Safe Mold","resin art","resin craft","resin mold","resin mould","rubber duck mold","silicone mold"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13608546369585,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3057","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rubber Duck Silicone Mold (16 Cavity) | Animal Bird Flexible Mold | Kawaii Resin Cabochon Mould | Decoden Piece DIY (29mm x 30mm)","public_title":null,"options":["Default Title"],"price":499,"weight":86,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_4c75ad83-02b5-4471-8b62-a70018d650ca.jpg?v=1541209854","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008-02_44c5b3eb-ded4-4b3c-be44-0bc251664006.jpg?v=1541209854"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_4c75ad83-02b5-4471-8b62-a70018d650ca.jpg?v=1541209854","options":["Title"],"media":[{"alt":"Rubber Duck Silicone Mold (16 Cavity) | Animal Bird Flexible Mold | Kawaii Resin Cabochon Mould | Decoden Piece DIY (29mm x 30mm) - MiniatureSweet","id":2654748934279,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_4c75ad83-02b5-4471-8b62-a70018d650ca.jpg?v=1541209854"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_4c75ad83-02b5-4471-8b62-a70018d650ca.jpg?v=1541209854","width":600},{"alt":"Rubber Duck Silicone Mold (16 Cavity) | Animal Bird Flexible Mold | Kawaii Resin Cabochon Mould | Decoden Piece DIY (29mm x 30mm) - MiniatureSweet","id":2654748901511,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008-02_44c5b3eb-ded4-4b3c-be44-0bc251664006.jpg?v=1541209854"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008-02_44c5b3eb-ded4-4b3c-be44-0bc251664006.jpg?v=1541209854","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e16 cavity rubber duck mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that the color of the mold could be different from pictured!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.9cm (W) x 3cm (L) \/ 1.14\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Sacred Geometry Hamsa Hand Magic Circle Silicone Mol...
$5.99 USD
{"id":7023830532249,"title":"Sacred Geometry Hamsa Hand Magic Circle Silicone Mold (9 Cavity) | Flower of Life Tree of Life Seed of Life Metatron's Cube Chakras Mould","handle":"sacred-geometry-hamsa-hand-magic-circle-silicone-mold-flower-of-life-tree-of-life-seed-of-life-metatrons-cube-chakras-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSacred geometry, hamsa hand and magic circle cabochon silicone mold assortment. \u003cspan\u003eNo releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 4.9cm or 1.93\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Dodecagon: approx. 5.1cm or 2.01\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Hamsa hand: approx. 4.7cm (W) x 6.2cm (L) \/ 1.85\" (W) x 2.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-08-31T13:54:05-11:00","created_at":"2021-08-30T21:29:46-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["cabochon mold","Chakras cabochons","clear mold","Dodecagon","epoxy resin","flexible mold","flower of life","Hamsa Hand","healing stone","magic circle","meditation","Metatron Cube","Metatron's Cube","pagan","reiki cabochon","religion","religious","resin art","resin craft","resin jewellery","resin jewelry","resin mold","resin mould","Sacred Geometry","seed of life","Seven Chakras Symbol","Silicone Mold","soft mold","Spiritual Jewelry","symbol mold","tree of life","uv resin","wicca jewelry","Wiccan","yoga"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40967246610585,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD5073A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sacred Geometry Hamsa Hand Magic Circle Silicone Mold (9 Cavity) | Flower of Life Tree of Life Seed of Life Metatron's Cube Chakras Mould","public_title":null,"options":["Default Title"],"price":599,"weight":117,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_8372e63e-9ccd-49a2-9d68-25d09ab8aba4.jpg?v=1630550890","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_e71987f0-e5ff-44f6-8920-716f38d15777.jpg?v=1630550891","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_986047c7-8471-442a-a23b-c588d857d070.jpg?v=1630550891"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_8372e63e-9ccd-49a2-9d68-25d09ab8aba4.jpg?v=1630550890","options":["Title"],"media":[{"alt":"Sacred Geometry Hamsa Hand Magic Circle Silicone Mold (9 Cavity) | Flower of Life Tree of Life Seed of Life Metatron's Cube Chakras Mould - MiniatureSweet","id":24103575552153,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_8372e63e-9ccd-49a2-9d68-25d09ab8aba4.jpg?v=1630550890"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_8372e63e-9ccd-49a2-9d68-25d09ab8aba4.jpg?v=1630550890","width":1000},{"alt":"Sacred Geometry Hamsa Hand Magic Circle Silicone Mold (9 Cavity) | Flower of Life Tree of Life Seed of Life Metatron's Cube Chakras Mould - MiniatureSweet","id":24103575584921,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_e71987f0-e5ff-44f6-8920-716f38d15777.jpg?v=1630550891"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_e71987f0-e5ff-44f6-8920-716f38d15777.jpg?v=1630550891","width":600},{"alt":"Sacred Geometry Hamsa Hand Magic Circle Silicone Mold (9 Cavity) | Flower of Life Tree of Life Seed of Life Metatron's Cube Chakras Mould - MiniatureSweet","id":24103575519385,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_986047c7-8471-442a-a23b-c588d857d070.jpg?v=1630550891"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_986047c7-8471-442a-a23b-c588d857d070.jpg?v=1630550891","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSacred geometry, hamsa hand and magic circle cabochon silicone mold assortment. \u003cspan\u003eNo releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 4.9cm or 1.93\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Dodecagon: approx. 5.1cm or 2.01\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Hamsa hand: approx. 4.7cm (W) x 6.2cm (L) \/ 1.85\" (W) x 2.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Saint Thomas Christian Cross Mold | Hollow Cross Cha...
$2.49 USD
{"id":10337448193,"title":"Saint Thomas Christian Cross Mold | Hollow Cross Charm Mold | Religion Jewellery Making | Resin Jewelry Mould | Kawaii Gothic Decoden (40mm x 49mm)","handle":"saint-thomas-christian-cross-mold-hollow-cross-charm-mold-religion-jewellery-making-resin-jewelry-mould-kawaii-gothic-decoden","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4cm (W) x 4.9cm (L) \/ 1.57\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-10-21T21:33:41-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism Mold","cabochon mold","Catholic cross","christian cross","Clear Mold","cross charm","Cross Mold","cross pendant","decoden mold","epoxy resin","Flexible Mold","Gothic Lolita","halloween mold","Kawaii Goth","Religion Jewelry","Religious Jewellery","resin art","resin craft","resin crafts","resin mold","resin mould","Saint Thomas Cross","silicone mold","soft mold","UV resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38648588737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD042A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Saint Thomas Christian Cross Mold | Hollow Cross Charm Mold | Religion Jewellery Making | Resin Jewelry Mould | Kawaii Gothic Decoden (40mm x 49mm)","public_title":null,"options":["Default Title"],"price":249,"weight":15,"compare_at_price":null,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD042A.jpg?v=1517671497"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD042A.jpg?v=1517671497","options":["Title"],"media":[{"alt":"Saint Thomas Christian Cross Mold | Hollow Cross Charm Mold | Religion Jewellery Making | Resin Jewelry Mould | Kawaii Gothic Decoden (40mm x 49mm) - MiniatureSweet","id":422591823921,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD042A.jpg?v=1517671497"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD042A.jpg?v=1517671497","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4cm (W) x 4.9cm (L) \/ 1.57\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Sakura Branch and Leaf Silicone Mold (4 Cavity) | Ch...
$1.49 USD
{"id":541505191985,"title":"Sakura Branch and Leaf Silicone Mold (4 Cavity) | Cherry Blossom Mold | Nature Floral Mold | Flower Cabochon Mold","handle":"sakura-branch-and-leaf-silicone-mold-4-cavity-cherry-blossom-mold-nature-floral-mold-flower-cabochon-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful sakura branch and leaf silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Sakura: approx. 2.6cm (W) x 2.4cm (L) \/ 1.02\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Branch: approx. 0.9cm (W) x 4.8cm (L) \/ 0.35\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e- Leaf (small): approx. 0.7cm (W) x 1.4cm (L) \/ 0.28\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Leaf (big): approx. 1.3cm (W) x 3.1cm (L) \/ 0.51\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2018-03-12T03:07:34-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Mold Mix","tags":["branch mold","cabochon mold","Cherry Blossom Mold","Clear Mold","Decoden Mold","epoxy resin","Flexible Mold","floral mold","flower mold","Kawaii Craft","leaf mold","nature","resin art","resin crafts","resin mold","resin mould","sakura branch","sakura leaf","sakura mold","Silicone Mold","soft mold","spring","UV Resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7277806682161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD364A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sakura Branch and Leaf Silicone Mold (4 Cavity) | Cherry Blossom Mold | Nature Floral Mold | Flower Cabochon Mold","public_title":null,"options":["Default Title"],"price":149,"weight":19,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD364A.jpg?v=1520938052"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD364A.jpg?v=1520938052","options":["Title"],"media":[{"alt":"Sakura Branch and Leaf Silicone Mold (4 Cavity) | Cherry Blossom Mold | Nature Floral Mold | Flower Cabochon Mold - MiniatureSweet","id":2520299176071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD364A.jpg?v=1520938052"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD364A.jpg?v=1520938052","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful sakura branch and leaf silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Sakura: approx. 2.6cm (W) x 2.4cm (L) \/ 1.02\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Branch: approx. 0.9cm (W) x 4.8cm (L) \/ 0.35\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e- Leaf (small): approx. 0.7cm (W) x 1.4cm (L) \/ 0.28\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Leaf (big): approx. 1.3cm (W) x 3.1cm (L) \/ 0.51\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Sakura Petal Silicone Mold (5 Cavity) | Cherry Bloss...
$1.79 USD
{"id":770139422769,"title":"Sakura Petal Silicone Mold (5 Cavity) | Cherry Blossom Mold | Flower Mold | Floral Mould | Resin Craft Supplies (9mm x 12mm)","handle":"sakura-petal-silicone-mold-cherry-blossom-mold-flower-mold-floral-mould-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSakura petal silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:36-11:00","created_at":"2018-05-14T23:42:20-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["cabochon mold","Cherry Blossom Mold","Clear Mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","floral mold","flower mold","petal mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","sakura mold","sakura petal","silicone mold","soft mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8699251851313,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1166","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sakura Petal Silicone Mold (5 Cavity) | Cherry Blossom Mold | Flower Mold | Floral Mould | Resin Craft Supplies (9mm x 12mm)","public_title":null,"options":["Default Title"],"price":179,"weight":13,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/027_b9b61138-0904-4e84-8ce5-99859a88319f.jpg?v=1526455083"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/027_b9b61138-0904-4e84-8ce5-99859a88319f.jpg?v=1526455083","options":["Title"],"media":[{"alt":"Sakura Petal Silicone Mold (5 Cavity) | Cherry Blossom Mold | Flower Mold | Floral Mould | Resin Craft Supplies (9mm x 12mm) - MiniatureSweet","id":2590105272455,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/027_b9b61138-0904-4e84-8ce5-99859a88319f.jpg?v=1526455083"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/027_b9b61138-0904-4e84-8ce5-99859a88319f.jpg?v=1526455083","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSakura petal silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Sakura Silicone Mold | Cherry Blossom Flexible Mould...
$1.49 USD
{"id":8532047489,"title":"Sakura Silicone Mold | Cherry Blossom Flexible Mould | Flower Mold | UV Resin Craft | Epoxy Resin Mold | Polymer Clay Mould | Kawaii Cabochon Making (28mm x 26mm)","handle":"sakura-silicone-mold-cherry-blossom-flexible-mould-flower-mold-uv-resin-craft-epoxy-resin-mold-polymer-clay-mould-kawaii-cabochon-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible cherry blossom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.8cm (W) x 2.6cm (L) \/ 1.1\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-11T20:51:00-11:00","created_at":"2016-12-11T20:38:26-11:00","vendor":"MiniatureSweet","type":"Flower Mold","tags":["cabochon mold","Cherry Blossom","clear mold","decoden supplies","epoxy resin","flexible mold","Floral Mould","Flower Mold","japan","japanese","kawaii crafts","Kawaii Jewelry","resin art","resin craft","resin mold","resin mould","Sakura Mold","silicone mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28806818177,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD954","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sakura Silicone Mold | Cherry Blossom Flexible Mould | Flower Mold | UV Resin Craft | Epoxy Resin Mold | Polymer Clay Mould | Kawaii Cabochon Making (28mm x 26mm)","public_title":null,"options":["Default Title"],"price":149,"weight":7,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD954_NEW.jpg?v=1517671659"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD954_NEW.jpg?v=1517671659","options":["Title"],"media":[{"alt":"Sakura Silicone Mold | Cherry Blossom Flexible Mould | Flower Mold | UV Resin Craft | Epoxy Resin Mold | Polymer Clay Mould | Kawaii Cabochon Making (28mm x 26mm) - MiniatureSweet","id":2421588099207,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD954_NEW.jpg?v=1517671659"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD954_NEW.jpg?v=1517671659","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible cherry blossom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.8cm (W) x 2.6cm (L) \/ 1.1\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Santa Claus Christmas Tree Animal Bear Silicone Mold...
$4.49 USD
{"id":8705397569,"title":"Santa Claus Christmas Tree Animal Bear Silicone Mold (8 Cavity) | Flexible Christmas Mold | Kawaii Cabochon Mold | Epoxy Resin Art | Food Safe Chocolate Mould | Party Supplies","handle":"santa-claus-christmas-tree-animal-bear-silicone-mold-8-cavity-flexible-christmas-mold-kawaii-cabochon-mold-epoxy-resin-art-food-safe-chocolate-mould-party-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e8 cavity Christmas mold in the shape of Santa Claus, Christmas tree and animal bear. Made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.2cm to 4.1cm (W) x 4.1cm to 4.5cm (L) x 2.3cm (Depth) \/ 1.26\" to 1.61\" (W) x 1.61\" to 1.77\" (L) x 0.89\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-22T00:48:08-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Animal Mold, Mold Mix","tags":["animal mold","Bear Mold","Cabochon Mold","Chocolate Mould","christmas mold","Christmas Tree","Epoxy Resin Art","Flexible Mold","Food Safe Mould","kawaii cabochon mold","Party Supplies","santa claus","Silicone Mold"],"price":449,"price_min":449,"price_max":449,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29679824769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Santa Claus Christmas Tree Animal Bear Silicone Mold (8 Cavity) | Flexible Christmas Mold | Kawaii Cabochon Mold | Epoxy Resin Art | Food Safe Chocolate Mould | Party Supplies","public_title":null,"options":["Default Title"],"price":449,"weight":87,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015.jpg?v=1517666940","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015-02.jpg?v=1517666940"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015.jpg?v=1517666940","options":["Title"],"media":[{"alt":"Santa Claus Christmas Tree Animal Bear Silicone Mold (8 Cavity) | Flexible Christmas Mold | Kawaii Cabochon Mold | Epoxy Resin Art | Food Safe Chocolate Mould | Party Supplies - MiniatureSweet","id":228429627441,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015.jpg?v=1517666940"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015.jpg?v=1517666940","width":600},{"alt":"Santa Claus Christmas Tree Animal Bear Silicone Mold (8 Cavity) | Flexible Christmas Mold | Kawaii Cabochon Mold | Epoxy Resin Art | Food Safe Chocolate Mould | Party Supplies - MiniatureSweet","id":228429660209,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015-02.jpg?v=1517666940"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3015-02.jpg?v=1517666940","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e8 cavity Christmas mold in the shape of Santa Claus, Christmas tree and animal bear. Made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.2cm to 4.1cm (W) x 4.1cm to 4.5cm (L) x 2.3cm (Depth) \/ 1.26\" to 1.61\" (W) x 1.61\" to 1.77\" (L) x 0.89\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Santa Claus Hat Mold | Christmas Silicone Mold | UV ...
$1.19 USD
{"id":10335642305,"title":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm)","handle":"santa-claus-hat-mold-christmas-silicone-mold-uv-resin-soft-mould-kawaii-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 2.9cm (L) \/ 1.18\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T03:07:56-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas hat","christmas mold","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","santa claus hat","silicone mold","soft mold","UV Resin"],"price":119,"price_min":119,"price_max":119,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38642523073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD682A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm)","public_title":null,"options":["Default Title"],"price":119,"weight":5,"compare_at_price":null,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481","options":["Title"],"media":[{"alt":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm) - MiniatureSweet","id":422468059185,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 2.9cm (L) \/ 1.18\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Sci Fi Magical Girl Silicone Mold Assortment (11 Cav...
$3.99 USD
{"id":6888033583257,"title":"Sci Fi Magical Girl Silicone Mold Assortment (11 Cavity) | Magic Wand Heart Saturn Rocket Moon Star Mould | Kawaii Decoden Cabochon DIY","handle":"sci-fi-magical-girl-silicone-mold-assortment-magic-wand-heart-saturn-rocket-moon-star-mould-kawaii-decoden-cabochon-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted sci fi magical girl item silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rocket: approx. 2.5cm (W) x 3cm (L) \/ 0.98\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Laser Gun: approx. 3.1cm (W) x 3cm (L) \/ 1.22\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Magic Wand: approx. 3.1cm (W) x 3.4cm (L) \/ 1.22\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 2cm (W) x 3cm (L) \/ 0.79\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Heart Saturn: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L) \u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 13mm x 11mm\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 10mm x 9mm, 13mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-07-07T13:17:50-11:00","created_at":"2021-07-06T17:04:37-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Star Mold, Other Mold, Mold Mix","tags":["assorted mold","assortment","cabochon mold","clear mold","Decoden Supplies","embellishment mold","epoxy resin","flexible mold","heart mold","kawaii crafts","laser gun mold","magic wand mold","magical girl","mahou kei","moon mold","resin art","resin craft","resin mold","resin mould","rocket mold","saturn mold","sci fi","science fiction","Silicone Mold","silicone mould","soft mold","spacecraft mold","star mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40496924655769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD6009A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sci Fi Magical Girl Silicone Mold Assortment (11 Cavity) | Magic Wand Heart Saturn Rocket Moon Star Mould | Kawaii Decoden Cabochon DIY","public_title":null,"options":["Default Title"],"price":399,"weight":57,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-02_544d8ec7-5840-4b1d-9ce7-bfcb22485f75.jpg?v=1625683647","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-03_7fded033-39ea-431c-9b93-241525584526.jpg?v=1625683648","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_98ea060b-643f-451a-9d57-5ee81068b090.jpg?v=1625683649"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-02_544d8ec7-5840-4b1d-9ce7-bfcb22485f75.jpg?v=1625683647","options":["Title"],"media":[{"alt":"Sci Fi Magical Girl Silicone Mold Assortment (11 Cavity) | Magic Wand Heart Saturn Rocket Moon Star Mould | Kawaii Decoden Cabochon DIY - MiniatureSweet","id":23248039772313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-02_544d8ec7-5840-4b1d-9ce7-bfcb22485f75.jpg?v=1625683647"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-02_544d8ec7-5840-4b1d-9ce7-bfcb22485f75.jpg?v=1625683647","width":600},{"alt":"Sci Fi Magical Girl Silicone Mold Assortment (11 Cavity) | Magic Wand Heart Saturn Rocket Moon Star Mould | Kawaii Decoden Cabochon DIY - MiniatureSweet","id":23248039837849,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-03_7fded033-39ea-431c-9b93-241525584526.jpg?v=1625683648"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031-03_7fded033-39ea-431c-9b93-241525584526.jpg?v=1625683648","width":600},{"alt":"Sci Fi Magical Girl Silicone Mold Assortment (11 Cavity) | Magic Wand Heart Saturn Rocket Moon Star Mould | Kawaii Decoden Cabochon DIY - MiniatureSweet","id":23248039870617,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_98ea060b-643f-451a-9d57-5ee81068b090.jpg?v=1625683649"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_98ea060b-643f-451a-9d57-5ee81068b090.jpg?v=1625683649","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted sci fi magical girl item silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rocket: approx. 2.5cm (W) x 3cm (L) \/ 0.98\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Laser Gun: approx. 3.1cm (W) x 3cm (L) \/ 1.22\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Magic Wand: approx. 3.1cm (W) x 3.4cm (L) \/ 1.22\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 2cm (W) x 3cm (L) \/ 0.79\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Heart Saturn: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L) \u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 13mm x 11mm\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 10mm x 9mm, 13mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Sea Shell Mold (3 Cavity) | Flexible Seashell Mould ...
$2.99 USD
{"id":8535131905,"title":"Sea Shell Mold (3 Cavity) | Flexible Seashell Mould | Mermaid Cabochon Mold | Silicone Mould for Epoxy Resin Crafts | Fimo Mold | Soap Mold | Kawaii Jewelry","handle":"sea-shell-mold-3-cavity-flexible-seashell-mould-mermaid-cabochon-mold-silicone-mould-for-epoxy-resin-crafts-fimo-mold-soap-mold-kawaii-jewelry","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible seashell silicone molds. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 4cm (W) x 3cm (L) \/ 1.57\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small (Left): approx. 2cm (W) x 1.8cm (L) \/ 0.8\" (W) x 0.72\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small (Right): approx. 2.3cm (W) x cm (L) \/ 0.91\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-12T21:33:00-11:00","created_at":"2016-12-12T21:21:50-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Mold Mix","tags":["Beach Embellishments","cabochon mold","Epoxy Resin Crafts","Fairy Kei","Fimo Mold","Flexible Mould","Kawaii Jewelry","marine life","Mermaid Cabochon","Sea Shell Mold","Seashell Mould","silicone mould","Soap Mold"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28816682049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD968","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sea Shell Mold (3 Cavity) | Flexible Seashell Mould | Mermaid Cabochon Mold | Silicone Mould for Epoxy Resin Crafts | Fimo Mold | Soap Mold | Kawaii Jewelry","public_title":null,"options":["Default Title"],"price":299,"weight":31,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD968.jpg?v=1517665687"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD968.jpg?v=1517665687","options":["Title"],"media":[{"alt":"Sea Shell Mold (3 Cavity) | Flexible Seashell Mould | Mermaid Cabochon Mold | Silicone Mould for Epoxy Resin Crafts | Fimo Mold | Soap Mold | Kawaii Jewelry - MiniatureSweet","id":207691350065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD968.jpg?v=1517665687"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD968.jpg?v=1517665687","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible seashell silicone molds. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 4cm (W) x 3cm (L) \/ 1.57\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small (Left): approx. 2cm (W) x 1.8cm (L) \/ 0.8\" (W) x 0.72\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small (Right): approx. 2.3cm (W) x cm (L) \/ 0.91\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Seahorse (27mm) Silicone Flexible Push Mold Miniatur...
$4.95 USD
{"id":5530312065,"title":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769","handle":"seahorse-27mm-silicone-flexible-push-mold-miniature-food-sweets-cupcake-jewelry-charms-clay-fimo-epoxy-gum-paste-fondant-wax-md769","description":"\u003cp\u003e★Measurement: approx. 1.1cm (W) x 2.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:02:00-11:00","created_at":"2016-03-26T02:02:06-11:00","vendor":"MiniatureSweet","type":"Fish Mold","tags":["aqua mold","cabochon mold","charm mold","deco mold","decoration mold","destash mold","embellishment","Handmade","jewelry mold","kawaii mold","polymer clay mold","resin mold","Scrapbooking","soap mold","Supplies","tool mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943842881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD769","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345122.jpeg?v=1517649808","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345123.jpeg?v=1517649808","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345124.jpeg?v=1517649808","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345125.jpeg?v=1517649808"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345122.jpeg?v=1517649808","options":["Title"],"media":[{"alt":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769 - MiniatureSweet","id":107546771505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345122.jpeg?v=1517649808"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345122.jpeg?v=1517649808","width":600},{"alt":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769 - MiniatureSweet","id":107546804273,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345123.jpeg?v=1517649808"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345123.jpeg?v=1517649808","width":600},{"alt":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769 - MiniatureSweet","id":107546837041,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345124.jpeg?v=1517649808"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345124.jpeg?v=1517649808","width":600},{"alt":"Seahorse (27mm) Silicone Flexible Push Mold Miniature Food Sweets Cupcake Jewelry Charms (Clay, Fimo, Epoxy, Gum Paste, Fondant, Wax) MD769 - MiniatureSweet","id":107546869809,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345125.jpeg?v=1517649808"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.171345125.jpeg?v=1517649808","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.1cm (W) x 2.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Seahorse Silicone Mold | Marine Life Mould | Fish Mo...
$1.39 USD
{"id":8746813441,"title":"Seahorse Silicone Mold | Marine Life Mould | Fish Mold | UV Resin Mold | Epoxy Resin Cabochon Mold | Kawaii Decoden Mold | Sea Animal Mold (20mm x 36mm)","handle":"seahorse-silicone-mold-marine-life-mould-fish-mold-uv-resin-mold-epoxy-resin-cabochon-mold-kawaii-decoden-mold-sea-animal-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCute little seahorse flexible silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2cm (W) x 3.6cm (L) \/ 0.79\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-01-28T02:00:39-11:00","vendor":"MiniatureSweet","type":"Fish Mold","tags":["Animal Mold","aquarium","cabochon mold","clear mold","Decoden Mold","epoxy resin mold","Fish Mold","Flexible Mold","Kawaii Decoden","Marine Life Mould","ocean","Resin Cabochon","Sea Animal","sea horse","Seahorse Mold","silicone mold","UV resin mold"],"price":139,"price_min":139,"price_max":139,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29986607681,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1051","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seahorse Silicone Mold | Marine Life Mould | Fish Mold | UV Resin Mold | Epoxy Resin Cabochon Mold | Kawaii Decoden Mold | Sea Animal Mold (20mm x 36mm)","public_title":null,"options":["Default Title"],"price":139,"weight":5,"compare_at_price":null,"inventory_quantity":32,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1051.jpg?v=1517667127"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1051.jpg?v=1517667127","options":["Title"],"media":[{"alt":"Seahorse Silicone Mold | Marine Life Mould | Fish Mold | UV Resin Mold | Epoxy Resin Cabochon Mold | Kawaii Decoden Mold | Sea Animal Mold (20mm x 36mm) - MiniatureSweet","id":228960043057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1051.jpg?v=1517667127"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1051.jpg?v=1517667127","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCute little seahorse flexible silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2cm (W) x 3.6cm (L) \/ 0.79\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Seashell and Starfish Soft Mold (6 Cavity) | Ocean S...
$1.99 USD
{"id":792154669105,"title":"Seashell and Starfish Soft Mold (6 Cavity) | Ocean Sea Marine Life Mold | Clear Silicone Mold for UV Resin | Epoxy Resin Mold","handle":"seashell-and-starfish-soft-mold-6-cavity-ocean-sea-marine-life-mold-clear-silicone-mold-for-uv-resin-epoxy-resin-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSeashell and starfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell (big): approx. 3.5cm (W) x 3.1cm (L) \/ 1.38\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e- Seashell (small): approx. 1.5cm (W) x 1.3cm (L) \/ 0.59\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Starfish (big): approx. 3.5cm (W) x 3.5cm (L) \/ 1.38\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e- Starfish (small): approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T22:54:09-11:00","created_at":"2018-07-03T22:44:23-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Mold Mix","tags":["beach decor","cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","marine life","ocean life","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea life","sea shell mold","Seashell Mold","Silicone Mold","soft mold","star fish mold","starfish mold","UV resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8935273103409,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1205","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seashell and Starfish Soft Mold (6 Cavity) | Ocean Sea Marine Life Mold | Clear Silicone Mold for UV Resin | Epoxy Resin Mold","public_title":null,"options":["Default Title"],"price":199,"weight":25,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/018_41ab29a4-31f9-4f5d-bd44-afb0708b7fb2.jpg?v=1530775178"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/018_41ab29a4-31f9-4f5d-bd44-afb0708b7fb2.jpg?v=1530775178","options":["Title"],"media":[{"alt":"Seashell and Starfish Soft Mold (6 Cavity) | Ocean Sea Marine Life Mold | Clear Silicone Mold for UV Resin | Epoxy Resin Mold - MiniatureSweet","id":2596231250055,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/018_41ab29a4-31f9-4f5d-bd44-afb0708b7fb2.jpg?v=1530775178"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/018_41ab29a4-31f9-4f5d-bd44-afb0708b7fb2.jpg?v=1530775178","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSeashell and starfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell (big): approx. 3.5cm (W) x 3.1cm (L) \/ 1.38\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e- Seashell (small): approx. 1.5cm (W) x 1.3cm (L) \/ 0.59\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Starfish (big): approx. 3.5cm (W) x 3.5cm (L) \/ 1.38\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e- Starfish (small): approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Seashell Charm Silicone Mold | Scallop Shell Pendant...
$2.49 USD
{"id":6884215029913,"title":"Seashell Charm Silicone Mold | Scallop Shell Pendant Mould | Mermaid Jewelry Making | Resin Craft Supplies (50mm x 52mm)","handle":"seashell-charm-silicone-mold-scallop-shell-pendant-mould-mermaid-jewelry-making-resin-craft-supplies","description":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eSeashell silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for resin craft.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5cm (W) x 5.2cm (L) \/ 1.97\" (W) x 2.05\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-04T23:11:37-11:00","created_at":"2021-07-04T22:45:47-11:00","vendor":"MiniatureSweet","type":"Nautical Mold","tags":["beach","cabochon mold","charm mold","embellishment mold","epoxy resin","flexible mold","kawaii crafts","marine life","mermaid","ocean","pendant mold","polymer clay mold","resin art","resin craft","resin jewellery","resin jewelry","resin mold","resin mould","Scallop Shell","sea","seashell mold","silicone mould","soft mold"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40481359528089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2170B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seashell Charm Silicone Mold | Scallop Shell Pendant Mould | Mermaid Jewelry Making | Resin Craft Supplies (50mm x 52mm)","public_title":null,"options":["Default Title"],"price":249,"weight":14,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/020_cd7a6ad5-68a4-48f9-b0f3-be25767d311f.jpg?v=1625683626"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/020_cd7a6ad5-68a4-48f9-b0f3-be25767d311f.jpg?v=1625683626","options":["Title"],"media":[{"alt":"Seashell Charm Silicone Mold | Scallop Shell Pendant Mould | Mermaid Jewelry Making | Resin Craft Supplies (50mm x 52mm) - MiniatureSweet","id":23222950592665,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/020_cd7a6ad5-68a4-48f9-b0f3-be25767d311f.jpg?v=1625683626"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/020_cd7a6ad5-68a4-48f9-b0f3-be25767d311f.jpg?v=1625683626","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eSeashell silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for resin craft.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5cm (W) x 5.2cm (L) \/ 1.97\" (W) x 2.05\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}