All Molds
Irregular Geometric Shapes Silicone Mold with Hole M...
$3.89 USD
{"id":5296591536281,"title":"Irregular Geometric Shapes Silicone Mold with Hole Maker (13 Cavity) for Resin Crafts | Geometry Jewellery Mould | Retro Dangle Earrings DIY","handle":"irregular-geometric-shapes-silicone-mold-with-hole-maker-for-resin-crafts-geometry-jewellery-mould-retro-dangle-earrings-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted irregular geometric shape silicone mold with hole maker. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making, etc.\u003c\/p\u003e\n\u003cp\u003e*If you want to make hole with the hole maker, please use UV resin, do not use 24 hours resin.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right, top to bottom):\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 2.3cm (W) x 3.3cm (L) \/ 0.91\" (W) x 1.3\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular trapezoid: approx. 2.4cm (W) x 3.3cm (L) \/ 0.94\" (W) x 1.3\" (L)\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 2.9cm (W) x 3.4cm (L) \/ 1.14\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Half circle: approx. 2.4cm (W) x 1.4cm (L) \/ 0.94\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Trapezoid: approx. 2.2cm (W) x 3cm (L) \/ 0.87\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 1.1cm (W) x 4cm (L) \/ 0.43\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e- Egg (upper): approx. 2.3cm (W) x 3.5cm (L) \/ 0.91\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e- Egg (lower): approx. 2.3cm (W) x 2.3cm (L) \/ 0.91\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 2.2cm (W) x 4.2cm (L) \/ 0.87\" (W) x 1.65\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 2.6cm (W) x 3.4cm (L) \/ 1.02\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular kite: approx. 2.3cm (W) x 3.8cm (L) \/ 0.91\" (W) x 1.5\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular circle: approx. 2.9cm (W) x 3.6cm (L) \/ 1.14\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small round: approx. 1.3cm or 0.51\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-06-24T20:58:00-11:00","created_at":"2020-06-15T14:35:11-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Round Mold, Oval Mold, Teardrop Mold, Mold Mix","tags":["charm mold","clear mold","dangle earrings","egg shaped mold","epoxy resin","flexible mold","geometric jewelry","geometry jewelry","half circle mold","hollow oval","hollow rectangle","hollow trapezoid","irregular shapes","jewelry mold","kite mold","oval mold","pendant mold","rectangle mold","rectangular mold","resin art","resin craft","resin crafts","resin jewellery","Resin Jewelry","resin mold","resin mould","retro earring","round mold","silicone mold","soft mold","statement jewelry","teardrop mold","trapezoid mold","uv resin"],"price":389,"price_min":389,"price_max":389,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34681347965081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3074A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Irregular Geometric Shapes Silicone Mold with Hole Maker (13 Cavity) for Resin Crafts | Geometry Jewellery Mould | Retro Dangle Earrings DIY","public_title":null,"options":["Default Title"],"price":389,"weight":58,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_c3354dcb-95ce-46ba-ac68-1375192d13d4.jpg?v=1592569166","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_16d7d816-53fe-4ce4-bc25-de3b762319b1.jpg?v=1592569167","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_3cb9b95a-fc4b-44de-9799-52208e17386b.jpg?v=1592569167"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_c3354dcb-95ce-46ba-ac68-1375192d13d4.jpg?v=1592569166","options":["Title"],"media":[{"alt":"Irregular Geometric Shapes Silicone Mold with Hole Maker (13 Cavity) for Resin Crafts | Geometry Jewellery Mould | Retro Dangle Earrings DIY - MiniatureSweet","id":9580020859033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_c3354dcb-95ce-46ba-ac68-1375192d13d4.jpg?v=1592569166"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_c3354dcb-95ce-46ba-ac68-1375192d13d4.jpg?v=1592569166","width":600},{"alt":"Irregular Geometric Shapes Silicone Mold with Hole Maker (13 Cavity) for Resin Crafts | Geometry Jewellery Mould | Retro Dangle Earrings DIY - MiniatureSweet","id":9580020891801,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_16d7d816-53fe-4ce4-bc25-de3b762319b1.jpg?v=1592569167"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_16d7d816-53fe-4ce4-bc25-de3b762319b1.jpg?v=1592569167","width":600},{"alt":"Irregular Geometric Shapes Silicone Mold with Hole Maker (13 Cavity) for Resin Crafts | Geometry Jewellery Mould | Retro Dangle Earrings DIY - MiniatureSweet","id":9580020924569,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_3cb9b95a-fc4b-44de-9799-52208e17386b.jpg?v=1592569167"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_3cb9b95a-fc4b-44de-9799-52208e17386b.jpg?v=1592569167","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted irregular geometric shape silicone mold with hole maker. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making, etc.\u003c\/p\u003e\n\u003cp\u003e*If you want to make hole with the hole maker, please use UV resin, do not use 24 hours resin.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right, top to bottom):\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 2.3cm (W) x 3.3cm (L) \/ 0.91\" (W) x 1.3\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular trapezoid: approx. 2.4cm (W) x 3.3cm (L) \/ 0.94\" (W) x 1.3\" (L)\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 2.9cm (W) x 3.4cm (L) \/ 1.14\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Half circle: approx. 2.4cm (W) x 1.4cm (L) \/ 0.94\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Trapezoid: approx. 2.2cm (W) x 3cm (L) \/ 0.87\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 1.1cm (W) x 4cm (L) \/ 0.43\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e- Egg (upper): approx. 2.3cm (W) x 3.5cm (L) \/ 0.91\" (W) x 1.38\" (L)\u003c\/p\u003e\n\u003cp\u003e- Egg (lower): approx. 2.3cm (W) x 2.3cm (L) \/ 0.91\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 2.2cm (W) x 4.2cm (L) \/ 0.87\" (W) x 1.65\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 2.6cm (W) x 3.4cm (L) \/ 1.02\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular kite: approx. 2.3cm (W) x 3.8cm (L) \/ 0.91\" (W) x 1.5\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular circle: approx. 2.9cm (W) x 3.6cm (L) \/ 1.14\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small round: approx. 1.3cm or 0.51\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Navette Rhombus Kite Pendant Silicone Mold Assortmen...
$2.49 USD
{"id":4538361446535,"title":"Navette Rhombus Kite Pendant Silicone Mold Assortment (6 Cavity) | Geometric Charm DIY | Resin Jewellery Making | Resin Craft Supplies","handle":"navette-rhombus-kite-pendant-silicone-mold-assortment-geometric-charm-diy-resin-jewellery-making-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted navette, rhombus and kite shaped pendant silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for resin jewelry making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eNavette (Short)\u003c\/span\u003e: approx. 0.8cm (W) x 3.1cm (L) \/ 0.31\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eNavette (Long)\u003c\/span\u003e\u003cspan\u003e: approx. 1cm (W) x 4.8cm (L) \/ 0.39\" (W) x 1.89\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRhombus (Short): approx. 0.6cm (W) x 3.1cm (L) \/ 0.24\" (W) x 1.22\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRhombus (Long): approx. 0.9cm (W) x 4.4cm (L) \/ 0.35\" (W) x 1.73\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKite (Short): approx. 0.7cm (W) x 3.6cm (L) \/ 0.28\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eKite\u003c\/span\u003e\u003cspan\u003e (\u003c\/span\u003e\u003cspan\u003eLong\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cspan\u003e approx. 0.9cm (W) x 4.7cm (L) \/ 0.35\" (W) x 1.85\" (L)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-02-03T21:11:10-11:00","created_at":"2020-01-22T22:51:29-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["charm mold","clear mold","epoxy resin","flexible mold","geometric mold","geometry mold","horse eye mold","kite mold","Navette mold","pendant mold","resin art","resin craft","resin jewellery","resin jewelry","resin mold","resin mould","rhombus mold","silicone mold","soft mold","uv resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179149308039,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD600A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Navette Rhombus Kite Pendant Silicone Mold Assortment (6 Cavity) | Geometric Charm DIY | Resin Jewellery Making | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":249,"weight":19,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_4c83347f-96c9-4904-89b0-d8a5c7096936.jpg?v=1579890299"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_4c83347f-96c9-4904-89b0-d8a5c7096936.jpg?v=1579890299","options":["Title"],"media":[{"alt":"Navette Rhombus Kite Pendant Silicone Mold Assortment (6 Cavity) | Geometric Charm DIY | Resin Jewellery Making | Resin Craft Supplies - MiniatureSweet","id":6435291299975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_4c83347f-96c9-4904-89b0-d8a5c7096936.jpg?v=1579890299"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_4c83347f-96c9-4904-89b0-d8a5c7096936.jpg?v=1579890299","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted navette, rhombus and kite shaped pendant silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for resin jewelry making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eNavette (Short)\u003c\/span\u003e: approx. 0.8cm (W) x 3.1cm (L) \/ 0.31\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eNavette (Long)\u003c\/span\u003e\u003cspan\u003e: approx. 1cm (W) x 4.8cm (L) \/ 0.39\" (W) x 1.89\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRhombus (Short): approx. 0.6cm (W) x 3.1cm (L) \/ 0.24\" (W) x 1.22\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRhombus (Long): approx. 0.9cm (W) x 4.4cm (L) \/ 0.35\" (W) x 1.73\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKite (Short): approx. 0.7cm (W) x 3.6cm (L) \/ 0.28\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eKite\u003c\/span\u003e\u003cspan\u003e (\u003c\/span\u003e\u003cspan\u003eLong\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cspan\u003e approx. 0.9cm (W) x 4.7cm (L) \/ 0.35\" (W) x 1.85\" (L)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Mini Triangle and Kite Silicone Mold (3 Cavity) | St...
$1.79 USD
{"id":769460502577,"title":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould","handle":"mini-triangle-and-kite-silicone-mold-3-cavity-stud-earring-mold-resin-jewelry-mold-uv-resin-clear-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini triangle and kite silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 0.7cm (W) x 1.1cm (L) \/ 0.28\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 0.6cm (W) x 0.8cm (L) \/ 0.24\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003eTriangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e7\u003c\/span\u003e\u003cspan\u003ecm (W) x \u003c\/span\u003e\u003cspan\u003e0.6\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-12T00:25:06-11:00","created_at":"2018-05-11T23:33:44-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","kite mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","stud earring","Stud Earrings","tiny mold","triangle mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8689290739761,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1153","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould","public_title":null,"options":["Default Title"],"price":179,"weight":5,"compare_at_price":null,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860","options":["Title"],"media":[{"alt":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould - MiniatureSweet","id":2587555954823,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini triangle and kite silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 0.7cm (W) x 1.1cm (L) \/ 0.28\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 0.6cm (W) x 0.8cm (L) \/ 0.24\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003eTriangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e7\u003c\/span\u003e\u003cspan\u003ecm (W) x \u003c\/span\u003e\u003cspan\u003e0.6\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted Shape Jewelry Mold (13 Cavity) | Resin Pend...
$2.99 USD
{"id":17581473793,"title":"Assorted Shape Jewelry Mold (13 Cavity) | Resin Pendant Silicone Mould | UV Resin Charm Making | Epoxy Resin Flexible Mold","handle":"assorted-shape-jewelry-mold-13-cavity-resin-pendant-silicone-mould-uv-resin-charm-making-epoxy-resin-flexible-mold","description":"\u003cp\u003eClear silicone mold in various shapes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4.8cm to 5.3cm (L) \/ 1.89\" to 2.09\" (L)\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.7cm or 0.67\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 1.6cm (W) x 2.5cm (L) \/ 0.63\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.6cm or 0.63\" (W)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 1.8cm (W) x 1.6cm (L) \/ 0.71\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular: approx. 2.8cm (W) x 1.7cm (L) \/ 1.1\" (W) x 0.67\" (L), 3.6cm (W) x 2.4cm (L) \/ 1.42\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003cbr\u003e\u003c\/p\u003e","published_at":"2016-12-16T21:27:00-11:00","created_at":"2017-10-28T02:09:09-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["charm mold","clear mold","epoxy resin","flexible mold","heart","kite mold","pendant mold","rectangle mold","rectangular mold","resin jewellery","resin jewelry","resin mold","resin mould","round mold","silicone mold","soft mold","Square Mold","triangle mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":72767340545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2113A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Assorted Shape Jewelry Mold (13 Cavity) | Resin Pendant Silicone Mould | UV Resin Charm Making | Epoxy Resin Flexible Mold","public_title":null,"options":["Default Title"],"price":299,"weight":101,"compare_at_price":null,"inventory_quantity":129,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2113A.jpg?v=1517671592"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2113A.jpg?v=1517671592","options":["Title"],"media":[{"alt":"Assorted Shape Jewelry Mold (13 Cavity) | Resin Pendant Silicone Mould | UV Resin Charm Making | Epoxy Resin Flexible Mold - MiniatureSweet","id":2421372649607,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2113A.jpg?v=1517671592"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2113A.jpg?v=1517671592","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eClear silicone mold in various shapes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4.8cm to 5.3cm (L) \/ 1.89\" to 2.09\" (L)\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.7cm or 0.67\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 1.6cm (W) x 2.5cm (L) \/ 0.63\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.6cm or 0.63\" (W)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 1.8cm (W) x 1.6cm (L) \/ 0.71\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular: approx. 2.8cm (W) x 1.7cm (L) \/ 1.1\" (W) x 0.67\" (L), 3.6cm (W) x 2.4cm (L) \/ 1.42\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003cbr\u003e\u003c\/p\u003e"}
Mini Soft Molds in Geometric Shapes (7 Cavity) | Res...
$2.99 USD
{"id":9205408705,"title":"Mini Soft Molds in Geometric Shapes (7 Cavity) | Resin Jewellery Silicone Mould | Triangle Kite Square Rectangle Flexible Mold","handle":"mini-soft-molds-in-geometric-shapes-7-cavity-resin-jewellery-silicone-mould-triangle-kite-square-rectangle-flexible-mold","description":"\u003cp\u003e7 cavity flexible silicone molds for making mini resin pieces in various shapes and sizes. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Equilateral Triangle: approx. 9mm (W) x 8mm (L) \/ 0.35\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Isosceles Triangle: approx. 8mm (W) x 9mm (L) \/ 0.31\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 8mm (W) x 12mm (L) \/ 0.31\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 8mm (W) x 8mm (L) \/ 0.31\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 8mm (W) x 11mm (L) \/ 0.31\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4mm (W) x 12mm (L) \/ 0.16\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx.4mm (W) x 15mm (L) \/ 0.16\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2017-04-17T20:14:43-11:00","created_at":"2017-04-17T19:50:20-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["clear mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","Kawaii Craft","Kite mold","mini mold","rectangle mold","rectangular mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","shape mold","silicone mold","small mold","soft mold","Square mold","tiny mold","triangle mold","uv resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":33182888641,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Soft Molds in Geometric Shapes (7 Cavity) | Resin Jewellery Silicone Mould | Triangle Kite Square Rectangle Flexible Mold","public_title":null,"options":["Default Title"],"price":299,"weight":19,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1080.jpg?v=1517668702"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1080.jpg?v=1517668702","options":["Title"],"media":[{"alt":"Mini Soft Molds in Geometric Shapes (7 Cavity) | Resin Jewellery Silicone Mould | Triangle Kite Square Rectangle Flexible Mold - MiniatureSweet","id":273784930353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1080.jpg?v=1517668702"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1080.jpg?v=1517668702","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e7 cavity flexible silicone molds for making mini resin pieces in various shapes and sizes. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Equilateral Triangle: approx. 9mm (W) x 8mm (L) \/ 0.35\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Isosceles Triangle: approx. 8mm (W) x 9mm (L) \/ 0.31\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 8mm (W) x 12mm (L) \/ 0.31\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 8mm (W) x 8mm (L) \/ 0.31\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 8mm (W) x 11mm (L) \/ 0.31\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4mm (W) x 12mm (L) \/ 0.16\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx.4mm (W) x 15mm (L) \/ 0.16\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}
Kite Charm Mold | Kite Pendant Silicone Mold | Resin...
Sold Out
{"id":8599256705,"title":"Kite Charm Mold | Kite Pendant Silicone Mold | Resin Pendant Making | Flexible Geometry Mold | Epoxy Resin Jewelry Supplies (16mm x 32mm)","handle":"kite-charm-mold-kite-pendant-silicone-mold-resin-pendant-making-flexible-geometry-mold-epoxy-resin-jewelry-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible kite charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eThe finished piece comes with a hole and can be used as charm \/ pendant.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.6cm (W) x 3.2cm (L) \/ 0.63\" (W) x 1.26\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-18T18:08:00-11:00","created_at":"2016-12-28T22:32:17-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["charm mold","Epoxy Resin Jewelry","flexible mold","geometry charm","Geometry Mold","Kite Charm","Kite Mold","Kite pendant","memory jewelry","pendant making","Pendant Mould","resin pendant","silicone mold"],"price":159,"price_min":159,"price_max":159,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29053947201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1041","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kite Charm Mold | Kite Pendant Silicone Mold | Resin Pendant Making | Flexible Geometry Mold | Epoxy Resin Jewelry Supplies (16mm x 32mm)","public_title":null,"options":["Default Title"],"price":159,"weight":4,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1041.jpg?v=1517666345"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1041.jpg?v=1517666345","options":["Title"],"media":[{"alt":"Kite Charm Mold | Kite Pendant Silicone Mold | Resin Pendant Making | Flexible Geometry Mold | Epoxy Resin Jewelry Supplies (16mm x 32mm) - MiniatureSweet","id":215128113201,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1041.jpg?v=1517666345"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1041.jpg?v=1517666345","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible kite charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eThe finished piece comes with a hole and can be used as charm \/ pendant.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.6cm (W) x 3.2cm (L) \/ 0.63\" (W) x 1.26\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
CLEARANCE Silicone Mold Flexible Mold (Summer Beach ...
Sold Out
{"id":5530205569,"title":"CLEARANCE Silicone Mold Flexible Mold (Summer Beach 10pcs) Fondant Gumpaste Cupcake Topper Chocolate Clay Resin Jewelry Scrapbooking Push Mold MD029","handle":"silicone-mold-flexible-mold-summer-beach-10pcs-fondant-gumpaste-cupcake-topper-chocolate-clay-resin-jewelry-scrapbooking-push-mold-md029","description":"\u003cp\u003e★Measurement: from approx. 1cm to 2.1cm (W) and 0.8cm to 4cm (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed\u003c\/p\u003e\n\u003cp\u003e★ Can be used on making food (Chocolate, Fondant, Gumpaste, etc), resin, clay, candle, soap, etc. However, if you used the mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2016-03-26T01:33:00-11:00","created_at":"2016-03-26T01:33:47-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["beach","cabochon mold","clay mold","earrings mold","flexible mold","flip flops mold","kite mold","scrapbooking","silicone mold","summer","sun mold","sunglasses mold","Supplies","swimming"],"price":499,"price_min":499,"price_max":499,"available":false,"price_varies":false,"compare_at_price":1195,"compare_at_price_min":1195,"compare_at_price_max":1195,"compare_at_price_varies":false,"variants":[{"id":16943472513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD029","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"CLEARANCE Silicone Mold Flexible Mold (Summer Beach 10pcs) Fondant Gumpaste Cupcake Topper Chocolate Clay Resin Jewelry Scrapbooking Push Mold MD029","public_title":null,"options":["Default Title"],"price":499,"weight":68,"compare_at_price":1195,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080686_cprh.jpeg?v=1601129957","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080682_7uh5.jpeg?v=1601129958","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080710_2zy1.jpeg?v=1601129958"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080686_cprh.jpeg?v=1601129957","options":["Title"],"media":[{"alt":"CLEARANCE Silicone Mold Flexible Mold (Summer Beach 10pcs) Fondant Gumpaste Cupcake Topper Chocolate Clay Resin Jewelry Scrapbooking Push Mold MD029 - MiniatureSweet","id":107446992945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080686_cprh.jpeg?v=1601129957"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080686_cprh.jpeg?v=1601129957","width":600},{"alt":"CLEARANCE Silicone Mold Flexible Mold (Summer Beach 10pcs) Fondant Gumpaste Cupcake Topper Chocolate Clay Resin Jewelry Scrapbooking Push Mold MD029 - MiniatureSweet","id":107447025713,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080682_7uh5.jpeg?v=1601129958"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080682_7uh5.jpeg?v=1601129958","width":600},{"alt":"CLEARANCE Silicone Mold Flexible Mold (Summer Beach 10pcs) Fondant Gumpaste Cupcake Topper Chocolate Clay Resin Jewelry Scrapbooking Push Mold MD029 - MiniatureSweet","id":107447058481,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080710_2zy1.jpeg?v=1601129958"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.559080710_2zy1.jpeg?v=1601129958","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: from approx. 1cm to 2.1cm (W) and 0.8cm to 4cm (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed\u003c\/p\u003e\n\u003cp\u003e★ Can be used on making food (Chocolate, Fondant, Gumpaste, etc), resin, clay, candle, soap, etc. However, if you used the mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}